Ezviz W3R User manual

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter
referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated,
EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to
the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information contained
in the Manual is subject to change, without notice, due to firmware updates or other reasons. Please
find the latest version in the ™ website (http://www.ezviz.com).
Revision Record
New release – January, 2022
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL
LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS
THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER
INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR
PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG
OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION
LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER
PREVAILS.

Table of Contents
Overview ��������������������������������������������������������������������������������������������������1
1� Package Contents ���������������������������������������������������������������������������������������������������������������������������������������� 1
2� Basics ���������������������������������������������������������������������������������������������������������������������������������������������������������� 1
Power On and Internet Connection������������������������������������������������������������2
Conguration �������������������������������������������������������������������������������������������2
One-Key Access ���������������������������������������������������������������������������������������3
Mesh Networking �������������������������������������������������������������������������������������3
Get the EZVIZ App ������������������������������������������������������������������������������������4
Add to EZVIZ App��������������������������������������������������������������������������������������4
Operations on the EZVIZ App ��������������������������������������������������������������������5
1� Homepage���������������������������������������������������������������������������������������������������������������������������������������������������� 5
2� Settings�������������������������������������������������������������������������������������������������������������������������������������������������������� 5

1
Overview
1� Package Contents
Router(x1)
Power Adapter(x1) Network Cable(x1) Regulatory Information(x2) Quick Start Guide(x1)
• The power adapter's appearance is subject to the one you have bought, it can not be used outdoors.
• Operating temperature of the power adapter: 0-40°C.
2� Basics
LED Indicator
Front View
Name Description
LED Indicator Flashing green: Starting up.
Solid blue: Network disconnected.
Solid green: Network connected.
Flashing blue: One-Key Access is enabled.
Flashing blue, green in turn: Restore to Factory Settings.
Solid Gray: Powered off or the indicator is turned off.

2
RESET Button
Power Port (DC 12V 1.5A)
LAN Port
WAN Port
Power on/off
Back View
Name Description
RESET Button Press and hold for over 7s to restart and set all parameters to default.
Press one time to enable Mesh Networking, or enble One-Key Access, please refer to
related section for details.
Power Port Use the power adapter included (DC 12V 1.5A).
Power On and Internet Connection
1. Connect the router to power outlet via power adapter.
2. Connect the WAN port of the router to the Internet via network cable.
connect to power outlet
connect to internet
Conguration
Whenusingtherouterforthersttime,youshouldconguretheparametersthroughthecomputerorthemobilephone.Wetake
the mobile phone as an example.
- Conrmthatthedevicehasbeenconnectedcorrectly,poweredonnormally,andtheledindicatorissolidgreen.
- Connect your mobile phone to the wireless network of the device (Network Name: ezviz_ XXXXXX, no password by default).
- Openthebrowserofyourmobilephone,input"wi.ezvizlife.com",andgototheconguringpage.
- Set the parameters such as the device management password, Wi-Fi name and password, etc.

3
One-Key Access
After the router configured network, the EZVIZ smart home camera(s) can connect the router's Wi-Fi by the function of One-Key
Access.
Poweronthecamera(s),andwhenthecamera(s)isinthestateofwaitingtoconguretheWi-Fi,presstherouter’sRESETbutton
one time to start detecting your camera(s), the camera(s) will connect the router’s Wi-Fi. the router will automatically exit One-Key
Access after 120s.
Mesh Networking
• Number of devices in the network: no more than 8 is recommended.
• Main router: A device that successfully connects to the network through the WAN port, or completes parameter configuration through the
configuration wizard.
The mesh networking is supported by the following methods.
Hardware method:
• When the sub routers is in the reset state, you only need to press the RESET button on the main router to build
automatically the mesh network.
• For a device that has not joined the mesh network, you only need to press the RESET button of the device (the main
router or the sub routers) that has joined the mesh network, and the device that has not joined the Mesh network will
automatically join the existing mesh network.
Software method:
- Logintotheconguringpageofthebrowserofyourcomputerormobilephone,orlogintoyourEZVIZAppthatadded
the main router.
- Go to Control panel > Route management > Add routers, the detected router will join mesh network.

4
Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ App by searching for “EZVIZ” in the App Store or Google PlayTM.
3. Launch the App and register an EZVIZ user account.
EZVIZ App
If you have already used the App, please make sure that it is the latest version. To find out if an update is available, go to the App store and search
for "EZVIZ".
Add to EZVIZ App
- Log in to your EZVIZ account.
- On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface.
- Scan the QR code on the Quick Start Guide cover or on the body of the device.
Scan QR Code
- Follow wizard to add your device to the EZVIZ App.

5
Operations on the EZVIZ App
The App interface may be different due to version update, and the interface of the App you installed on your phone shall
prevail.
1� Homepage
When you launch the EZVIZ App, the main router’s homepage displays as shown below.
You can choose to go to the interface of Control Panel, Terminal Management or Toolbox as needed.
Icon Description
Settings. View or change the device settings.
Panel Control. Manage the device.
Terminal Management. View and manage the terminals connected to
the device.
Toolbox. Tap to select tools to set relevant parameters for your device
as needed.
2� Settings
In the settings page, you can set the parameters of the device.
Parameter Description
Device Information You can see the device information here.
Delete Device Tap to delete the device from your EZVIZ account.
Other manuals for W3R
1
Table of contents
Other Ezviz Network Router manuals
Popular Network Router manuals by other brands

Unitronics
Unitronics V350-35-RA22 installation guide

TP-Link
TP-Link SafeStream TL-R600VPN user guide

E-data
E-data DSL-2120 Series user guide

Patton electronics
Patton electronics PASSERELLES ROUTEURS VOIP 455X Manuel de configuration simplifié

Cisco
Cisco Catalyst 3550 Series Software configuration guide

Asus
Asus RT-AC68W quick start guide

Aluratek
Aluratek CDW530AM user manual

TP-Link
TP-Link TL-ER604W datasheet

Cradlepoint
Cradlepoint MBR1400 Series product manual

Kodak
Kodak Carousel S-AV B instruction manual

Cabletron Systems
Cabletron Systems SSR 2000 quick start guide

ZyXEL Communications
ZyXEL Communications ES-1016B Declaration of conformity