Ezviz CS-RT1 User manual

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of
Hangzhou EZVIZ Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter
referred to as “the Manual”) cannot be reproduced, changed, translated, or distributed, partially or
wholly, by any means, without the prior written permission of EZVIZ. Unless otherwise stipulated,
EZVIZ does not make any warranties, guarantees or representations, express or implied, regarding to
the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and
all other information hereinafter are for description and explanation only. The information contained
in the Manual is subject to change, without notice, due to rmware updates or other reasons. Please
nd the latest version in the ™ website (http://www.ezviz.com).
Revision Record
New release – January, 2023
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various
jurisdictions. Other trademarks and logos mentioned below are the properties of their respective
owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH
ITS HARDWARE, SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS,
AND EZVIZ MAKES NO WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION,
MERCHANTABILITY, SATISFACTORY QUALITY, FITNESS FOR A PARTICULAR PURPOSE, AND
NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS DIRECTORS, OFFICERS,
EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, OR
INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS,
BUSINESS INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH
THE USE OF THIS PRODUCT, EVEN IF EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL
LIABILITY FOR ALL DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS
THE RESULT OF PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER
INSTALLATION OR USAGE OTHER THAN AS REQUESTED; B) THE PROTECTION OF NATIONAL OR
PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE THIRD PARTY, INCLUDING WITHOUT
LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS, AND AMONG
OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY
AT YOUR OWN RISKS. EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION,
PRIVACY LEAKAGE OR OTHER DAMAGES RESULTING FROM CYBER ATTACK, HACKER ATTACK,
VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS; HOWEVER, EZVIZ WILL PROVIDE
TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA PROTECTION
LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION
BEFORE USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE
APPLICABLE LAW. EZVIZ SHALL NOT BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH
ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER
PREVAILS.

2
Table of Contents
Overview ��������������������������������������������������������������������������������������������������1
1� Package Contents ���������������������������������������������������������������������������������������������������������������������������������������� 1
2� Basics ���������������������������������������������������������������������������������������������������������������������������������������������������������� 1
Add to EZVIZ App��������������������������������������������������������������������������������������4
Network Conguration �����������������������������������������������������������������������������4
Congure Network via App��������������������������������������������������������������������������������������������������������������������������������� 4
Congure Network via Website �������������������������������������������������������������������������������������������������������������������������� 4
One-Key Access ���������������������������������������������������������������������������������������5
Hardware method ���������������������������������������������������������������������������������������������������������������������������������������������� 5
Software method ����������������������������������������������������������������������������������������������������������������������������������������������� 5
Mesh Networking �������������������������������������������������������������������������������������6
Hardware method ���������������������������������������������������������������������������������������������������������������������������������������������� 6
Software method ����������������������������������������������������������������������������������������������������������������������������������������������� 6
Operations on the EZVIZ App ��������������������������������������������������������������������7
1� Control Panel������������������������������������������������������������������������������������������������������������������������������������������������ 7
2� Terminal Management���������������������������������������������������������������������������������������������������������������������������������� 9
3� Toolbox ������������������������������������������������������������������������������������������������������������������������������������������������������ 10
4� Settings������������������������������������������������������������������������������������������������������������������������������������������������������ 11
SPECIFICATION ��������������������������������������������������������������������������������������12
INFORMATION FOR PRIVATE HOUSEHOLDS �������������������������������������������12

1
Overview
1� Package Contents
Router(x1)
(hereinafter referred to as “device“)
Power Adapter(x1) Network Cable(x1) Regulatory Information(x2) Quick Start Guide(x1)
The device's appearance is subject to the one you have bought, it can not be used outdoors.
2� Basics
The following description will take AX3000 as an example.
LED Indicator
Front View

2
Name Description
AX1800
LED Indicator
Slow-flashing green: System started up but the network disconnected.
Solid green: System started up and the network connected.
Solid blue: System starting up.
Slow-flashing green: One-Key Access is enabled.
Fast-flashing blue: Restore to Factory Settings.
AX3000
LED Indicator
Solid blue: System starting up.
Breathing light flashing green: System started up but the network
disconnected.
Solid green: System started up and the network connected.
Breathing light flashing blue: One-Key Access is enabled.
Fast-flashing blue: Restore to Factory Settings.
POWER Button POWER Port WAN/LAN Port RESET HoleMESH/SYNC
Back View
Different from AX3000, WAN/LAN port of the AX1800 is separately used.
Name Description
RESET Hole Poke over 7s to restart and set all parameters to default.
MESH/SYNC Button Press once to enable Mesh Networking, or enble One-Key Access, please
refer to "One-Key Access" section for details.
POWER Port Use the power adapter included (DC 12V 1.5A).
POWER Button Press once to turn on/off the device.
WAN/LAN Port Support Ethernet Cable Blind Plug-in, any port of the four can be used as
WAN Port or Lan Port.

3
Get the EZVIZ App
1. Connect your mobile phone to Wi-Fi (suggested).
2. Download and install the EZVIZ app by searching for “EZVIZ” in the App Store or Google PlayTM.
3. Launch the app and register an EZVIZ user account.
EZVIZ App
If you have already used the app, please make sure that it is the latest version. To nd out if an update is
available, go to the app store and search for "EZVIZ".
Setup
1. Connect the device to power outlet via power adapter.
2. Connect any of WAN/LAN port of the device to the Internet via network cable.
(For AX1800) Connect the WAN port of the device to the Internet via network cable.
12V 1.5A

4
Add to EZVIZ App
-Log in to your EZVIZ account.
-On the Home screen, tap “+” on the upper-right corner to go to the Scan QR Code interface.
-Scan the QR code on the Quick Start Guide cover or on the body of the device.
-Follow wizard to add your device to the EZVIZ app.
Network Conguration
When using the device for the rst time, please congure the parameters through the following
two methods.
Congure Network via App
Please operate according to the description of the "Setup" and "Add to EZVIZ App" sections to
complete the network conguration.
Congure Network via Website
Conrm that the device has been connected correctly according to Setup section, and then press
the Power button once and the LED indicator is solid green.
-Connect your mobile phone to the Wi-Fi of the device (Network Name: ezviz_ XXXXXX, no
password by default).
-Open the browser of your mobile phone, input "wi.ezvizlife.com", and go to the conguring
page.
-Set the parameters such as the device management password, Wi-Fi name and password, etc.

5
One-Key Access
After the network configuration completed, the EZVIZ smart home camera(s) can connect to the
router's Wi-Fi by the function of One-Key Access.
Hardware method
- Restore EZVIZ camera(s) to its factory settings or restart it in its factory default state;
- When the camera(s) is in the state of waiting to congure the Wi-Fi, press MESH/SYNC Button of
the device once to delete your camera(s), and then the camera(s) will connect to the device’s Wi-
Fi.
The device will automatically exit One-Key Access after 120s.
Software method
-Log in to the conguring page of the browser of your computer or mobile phone, or log in to
your EZVIZ App that added the main router.
-Go to Control panel -> EZVIZ cameras -> Quick network conguration, access your camera(s)
by following the wizard on App.

6
Mesh Networking
Number of devices in the network: no more than 8 is recommended.
The mesh networking is supported by the following methods.
Hardware method
-When the sub routers are in the reset state, you only need to press the MESH/SYNC Button on
the main router to build automatically the mesh network.
-For a device that has not joined the mesh network, you only need to press the MESH/SYNC
Button of the device (the main router or the sub routers) that has joined the mesh network,
and the device that has not joined the Mesh network will automatically join the existing mesh
network.
Main Router Sub Router
Software method
-Log in to the conguring page of the browser of your computer or mobile phone, or log in to
your EZVIZ app that added the main router.
-Go to Control panel > Router management > Add routers, the detected router will join the mesh
network.

7
Operations on the EZVIZ App
The app interface may be different due to version update, and the interface of the app you installed on your
phone shall prevail.
1� Control Panel
When you launch the EZVIZ app, the device’s control panel page displays as shown below.
You can choose to go to the Control panel, Terminal management or Toolbox as needed.
Icon Description
Router management. For more details, please refer to Router
Management page.
Internet speed optimization. Tap to improve your Wi-Fi environment
and Internet speed automatically.
Trafc map. Tap to view the detailed trafc using information.
Work plan. Tap to set a work plan for your device.
Wi-Fi settings. Tap to set Wi-Fi parameters of your device.

8
Router Management
No.Description
1View online router number.
2See using status of the ports and current negotiated rate.
3Tap to add sub routers to your device.
4View device status.
5See more device information, like CPU utilization, memory
utilization, device name, MAC address, serial number and etc.

9
2� Terminal Management
Icon Description
Anti Wi-Fi squatter. Tap to turn on/off the anti Wi-Fi squatter.
When turn on the anti Wi-Fi squatter, please ensure that your
device is connecting to the Wi-Fi, otherwise you will be added
into the block list by the deivce.
Online reminder. Tap to add a terminal for online reminder.
Parent management. Tap to set the time limit and web access limit
for your terminal.
block list. Tap to view the added terminal in your blocklist.
Speed limit management. Tap to view speed-limited terminals for
now.

10
3� Toolbox
AX3000 AX1800
Icon Description
Channel Planning. Tap to select a better channel for excellent network
experience.
Wi-Fi advanced settings. Tap to set Wi-Fi parameters.
Wi-Fi timer. Turn on/off the Wi-Fi off period.
Guest network. Tap to turn on/off the guest network.
Network examination. Tap to test the network conditions.
Advanced router settings. Set MTU value and other parameters.

11
LAN settings. Set the related LAN parameters for your device.
Working mode. Tap to select the working mode as you needed.
Device upgrading. Tap to check whether there is a latest version to be
upgraded for your device.
Status light settings. Turn on/off the status light or set scheduled turning
off time period.
Device restarting. Tap to restart the device or set a scheduled restart.
Restore to factory settings. Tap to restore to factory settings.
(Only for AX3000) Wireless power settings. Tap to adjust power
transmission of the router.
(Only for AX3000) Multi-WAN Ports. Set one port as a WAN port,
congure features like MAC clone and MTU.
(Only for AX3000) IPv6 settings. Congure prex length of IPV6, DNS,
PPPOEV6 dialing information and other information.
(Only for AX3000) Change management password. Tap to change the
management password.
(Only for AX1800) Internet mode. Tap to select Internet mode as you
needed.
(Only for AX1800) MAC clone. Turn on/off MAC clone.
4� Settings
In the settings page, you can set the parameters of the device.
Parameter Description
Name Tap to edit the device name.
Device
Information You can see the device information here.
Delete Device Tap to delete the device from your EZVIZ account.

12
SPECIFICATION
Parameters Descriptions
Model CS-RT1 (AX1800, 4GE) CS-RT1 (AX3000, 4GE)
Power Source DC 12V 1.5A DC 12V 1.5A
Antenna Number 4 external antennas 4 external antennas + 1 built- in antenna
Wi-Fi Standard AX1800 AX3000
INFORMATION FOR PRIVATE HOUSEHOLDS
1. Separate collection of waste equipment: Electrical and electronic equipment that has become
waste is referred to as waste equipment. Owners of waste equipment must dispose of it separately
from unsorted municipal waste. In particular, waste equipment does not belong in household waste,
but in special collection and return systems.
2. Batteries and rechargeable batteries as well as lamps: Owners of waste equipment shall, as a rule,
separate waste batteries and rechargeable batteries that are not enclosed in the waste equipment,
which can be removed from the waste equipment without being destroyed, from the waste equipment
before handing them in at a collection point. This does not apply if waste equipment is prepared for
reuse with the participation of a public waste management authority.
3. Options for returning waste equipment: Owners of waste equipment from private households can
return it free of charge to the collection points of the public waste management authorities or to the
take-back points set up by manufacturers or distributors within the meaning of the Electrical and
Electronics Equipment Law. Stores with a sales area of at least 400 m² for electrical and electronic
equipment and those grocery stores with a total sales area of at least 800 m² that offer electrical
and electronic equipment several times a year or on a permanent basis and make it available in
the market are required to take it back. This also applies in the case of distribution using means of
distance communication, if the storage and shipping areas for electrical and electronic equipment
are at least 400 m² or the total storage and shipping areas are at least 800 m². Distributors shall, in
principle, ensure take-back by providing suitable return facilities at a reasonable distance from the
respective end user. The possibility of returning waste equipment free of charge exists for distributors
who are obliged to take it back, among other things, if a new similar device that essentially fullls the
same functions is delivered to an end user.
4. Privacy Notice: Waste equipment often contains sensitive personal data. This applies in particular
to devices of information and telecommunications technology such as computers and smartphones.
In your own interest, please note that each end user is responsible for deleting the data on the waste
equipment to be disposed of.
5. Meaning of the symbol “crossed-out wheelie bin”: The symbol of a crossed-out wheelie bin
regularly depicted on electrical and electronic equipment indicates that the respective device is to be
collected separately from unsorted municipal waste at the end of its service life.
Other manuals for CS-RT1
1
Table of contents
Other Ezviz Network Router manuals