Ezviz C6CN User manual

www.ezvizlife.com
JP

COPYRIGHT © Hangzhou EZVIZ Software Co., Ltd.. ALL RIGHTS RESERVED.
Any and all information, including, among others, wordings, pictures, graphs are the properties of Hangzhou EZVIZ
Software Co., Ltd. (hereinafter referred to as “EZVIZ”). This user manual (hereinafter referred to as “the Manual”)
cannot be reproduced, changed, translated, or distributed, partially or wholly, by any means, without the prior written
permission of EZVIZ. Unless otherwise stipulated, EZVIZ does not make any warranties, guarantees or representations,
express or implied, regarding to the Manual.
About this Manual
The Manual includes instructions for using and managing the product. Pictures, charts, images and all other
information hereinafter are for description and explanation only. The information contained in the Manual is subject
to change, without notice, due to firmware updates or other reasons. Please find the latest version in the
™ website (http://www.ezvizlife.com).
Revision Record
New release – January, 2019
Trademarks Acknowledgement
™, ™, and other EZVIZ’s trademarks and logos are the properties of EZVIZ in various jurisdictions.
Other trademarks and logos mentioned below are the properties of their respective owners.
Legal Disclaimer
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE PRODUCT DESCRIBED, WITH ITS HARDWARE,
SOFTWARE AND FIRMWARE, IS PROVIDED “AS IS”, WITH ALL FAULTS AND ERRORS, AND EZVIZ MAKES NO
WARRANTIES, EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, MERCHANTABILITY, SATISFACTORY QUALITY,
FITNESS FOR A PARTICULAR PURPOSE, AND NON-INFRINGEMENT OF THIRD PARTY. IN NO EVENT WILL EZVIZ, ITS
DIRECTORS, OFFICERS, EMPLOYEES, OR AGENTS BE LIABLE TO YOU FOR ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL,
OR INDIRECT DAMAGES, INCLUDING, AMONG OTHERS, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS
INTERRUPTION, OR LOSS OF DATA OR DOCUMENTATION, IN CONNECTION WITH THE USE OF THIS PRODUCT, EVEN IF
EZVIZ HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL EZVIZ’S TOTAL LIABILITY FOR ALL
DAMAGES EXCEED THE ORIGINAL PURCHASE PRICE OF THE PRODUCT.
EZVIZ DOES NOT UNDERTAKE ANY LIABILITY FOR PERSONAL INJURY OR PROPERTY DAMAGE AS THE RESULT OF
PRODUCT INTERRUPTION OR SERVICE TERMINATION CAUSED BY: A) IMPROPER INSTALLATION OR USAGE OTHER THAN
AS REQUESTED; B) THE PROTECTION OF NATIONAL OR PUBLIC INTERESTS; C) FORCE MAJEURE; D) YOURSELF OR THE
THIRD PARTY, INCLUDING WITHOUT LIMITATION, USING ANY THIRD PARTY’S PRODUCTS, SOFTWARE, APPLICATIONS,
AND AMONG OTHERS.
REGARDING TO THE PRODUCT WITH INTERNET ACCESS, THE USE OF PRODUCT SHALL BE WHOLLY AT YOUR OWN RISKS.

EZVIZ SHALL NOT TAKE ANY RESPONSIBILITES FOR ABNORMAL OPERATION, PRIVACY LEAKAGE OR OTHER DAMAGES
RESULTING FROM CYBER ATTACK, HACKER ATTACK, VIRUS INSPECTION, OR OTHER INTERNET SECURITY RISKS;
HOWEVER, EZVIZ WILL PROVIDE TIMELY TECHNICAL SUPPORT IF REQUIRED. SURVEILLANCE LAWS AND DATA
PROTECTION LAWS VARY BY JURISDICTION. PLEASE CHECK ALL RELEVANT LAWS IN YOUR JURISDICTION BEFORE
USING THIS PRODUCT IN ORDER TO ENSURE THAT YOUR USE CONFORMS TO THE APPLICABLE LAW. EZVIZ SHALL NOT
BE LIABLE IN THE EVENT THAT THIS PRODUCT IS USED WITH ILLEGITIMATE PURPOSES.
IN THE EVENT OF ANY CONFLICTS BETWEEN THE ABOVE AND THE APPLICABLE LAW, THE LATTER PREVAILS.
Regulatory Information
FCC Information
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Note: This product has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This product generates, uses, and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful
interference to radio or television reception, which can be determined by turning the equipment off and on, the user
is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Please take attention that changes or modification not expressly approved by the party responsible for compliance
could void the user’s authority to operate the equipment.
This equipment should be installed and operated with a minimum distance 20cm between the radiator and your body.
This device complies with Industry Canada licence-exempt RSS standard(s). Operation is subject to the following two
conditions:
(1) this device may not cause interference, and
(2) this device must accept any interference, including interference that may cause undesired operation of the device.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum
(or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users,
the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not
more than that necessary for successful communication.

SAVE THIS MANUAL FOR FUTURE REFERENCE
EU Conformity Statement
This product and - if applicable - the supplied accessories too are marked with "CE" and comply
therefore with the applicable harmonized European standards listed under the Radio Equipment
Directive 2014/53/EU, the EMC Directive 2014/30/EU, the RoHS Directive 2011/65/EU.
2012/19/EU (WEEE directive): Products marked with this symbol cannot be disposed of as unsorted
municipal waste in the European Union. For proper recycling, return this product to your local supplier
upon the purchase of equivalent new equipment, or dispose of it at designated collection points. For
more information see: www.recyclethis.info.
2006/66/EC (battery directive): This product contains a battery that cannot be disposed of as
unsorted municipal waste in the European Union. See the product documentation for specific battery
information. The battery is marked with this symbol, which may include lettering to indicate cadmium
(Cd), lead (Pb), or mercury (Hg). For proper recycling, return the battery to your supplier or to a
designated collection point. For more information see: www.recyclethis.info.
EC DECLARATION OF CONFORMITY
Hereby, Hangzhou Hikvision Digital Technology Co., Ltd. declares that the radio equipment type [CS-CV246] is in
compliance with Directive 2014/53/EU.
The full text of the EC DECLARATION OF CONFORMITY is available at the following web link:
http://www.ezvizlife.com/declaration-of-conformity.
Safety Instruction
Due to the product shape and dimension, the name and address of the importer/manufacturer are
printed on the package.
Customer Service
For more information, please visit www.ezvizlife.com.
Need help? Please visit “www.ezvizlife.com/inter/page/contact-us” for our local contact details.

1
Setup
Step 1 Power-on
Plug the power cable into the camera, and then plug the power adapter into an outlet as shown
in the figure below.
Power Outlet
Power Cable
Power Interface
LED Indicator Status
Solid Red: Camera is starting up.
Slowly Flashing Red: Wi-Fi connection has failed.
Fastly Flashing Red: Device exception (e.g. MicroSD
card error).
Solid Blue: Video is being viewed or played back in
EZVIZ App.
Fastly Flashing Blue: Camera is ready for the Wi-Fi
connection.
Slowly Flashing Blue: Camera is running properly.
Turn on the camera and let it power up. The camera will completely rotate side-to-side and
tilt up-and-down once.

2
Step 2 Camera Setup
1. Create a user account
- Connect your mobile phone to Wi-Fi using your 2.4GHz network.
- Search for "EZVIZ" in the App Store or Google Play (TM).
- Download and install the EZVIZ app.
- Launch the app.
- Create, and register an EZVIZ user account by following the startup wizard.
2. Adding a camera to EZVIZ
- Log in to your account using the EZVIZ app.
- Tap "+" on the Home page to go to the Scan QR Code interface.
- Scan the QR Code on the camera.
- Follow the EZVIZ app wizard to finish Wi-Fi configuration.

3
microSD Card Slot
Reset Button
• If the camera fails to connect to your Wi-Fi network, press and hold the Reset button for 5s
and repeat Step 2.2.
• To select another Wi-Fi network, press and hold the Reset button for 5s to reboot the device.
3. Enable the Image Encryption
After enabling it, your video and image can be encrypted in transmission.
You can also change the default password.
- Go to the camera settings.
- Tap “Change Password”.
- Tap “Edit”.
- Enter the original verification code located on the label of the camera.
- Enter new password (6 to 12 characters and numbers).
4. Angle Adjustment
You can adjust the camera via the EZVIZ app to get an optimum angle.
The panning angle ranges from 0° to 340°, and the tilting angle ranges from -15° to 105°.

4
SD Card Management
•InsertaMicroSDcardintotheslotbeforemounting.
•MicroSD card not included in the Box Contents. Recommended compatibility: Class10,
Max.128GB.
1. In the EZVIZ app, tap the Storage Status in the Device Settings interface to check the SD card
status.
2. If the memory card status displays as Uninitialized, tap to initialize it.
The status will then change to Normal and it can store videos and/or pictures.
Mounting (Optional)
The camera can be mounted on the wall or ceiling.
• Make sure the wall/ceiling is strong enough to withstand three times the weight of the
camera and the mounting.
• Camera should stay away from any reflective objects such as mirrors.

5
1. Place drill template onto the surface you have chosen to mount the camera.
2. (For cement wall/ceiling only) Drill screw holes according to the template and insert three expansion
screws.
3. Use three metal screws to fix the camera base according to the template.
4. Install the camera on the base, and turn it 15° to secure it.
1
2
5. Connect the power cable to the camera. If the camera was previously connected to the Wi-Fi
network, it will automatically connect to the same Wi-Fi network.

6
Appendix
Box Content
Camera (x1) Base (x1)
Power Cable (x1) Drill Template (x1) Screw Kit (x1)
Power Adapter (x1) Quick Start Guide x(1)

7
Type A
Type B
Type
For detailed information, please visit www.ezvizlife.com.
LED Indicator
Louderspeaker Power
Interface
Louderspeaker Network
Interface
Power Interface
LED Indicator

8
설정
1단계 전원 켜기
전원 케이블을 카메라에 연결한 후아래 그림과 같이 전원 어댑터를
전원 소켓에 꽂습니다 .
전원 소켓
전원 케이블
전원 인터페이스
LED 표시등 상태
빨간불 점등 : 카메라가 시동 중입니다 .
천천히 깜박이는 빨간불 : Wi-Fi 연결에 실
패했습니다 .
빠르게 깜박이는 빨간불 : 장비 비정상
(예: microSD 카드 오류 ).
파란불 점등 : EZVIZ 앱에서 비디오를 보고
있거나 재생합니다 .
빠르게 깜박이는 파란불 : 카메라의 Wi-Fi
연결이 준비되었습니다 .
천천히 깜박이는 파란불 : 카메라가 정상
적으로 작동 중입니다 .
카메라 를켜면 전원이 켜집니다 . 카메라가 한번 완전히 좌우로 회전
한후위아래로 움직입니다 .

9
2단계카메라 설정
1. 사용자 계정 생성
- 2.4GHz 네트워크를 사용해 모바일 폰을 Wi-Fi 에연결합니다 .( 혹은
랜케이블 로네트워크에 연결합니다 )
- App Store 또는 Google Play (TM) 에서 "EZVIZ" 를검색합니다 .
- EZVIZ 앱을 설치합니다 .
- 앱을 실행합니다 .
- 시작 마법사에 따라 EZVIZ 사용자 계정을 생성 및등록합니다 .
2. EZVIZ 에카메라 추가
- EZVIZ 앱을 사용해 계정에 로그인합니다 .
- 홈화면에서 "+" 를탭해 QR 코드 스캔 인터페이스로 이동합니다 .
- 카메라 바닥면의 QR 코드를 스캔하거나 라벨에 있는 일련번호를
입력합니다 .
- Wi-Fi 구성을 종료하려면 EZVIZ 앱마법사를 따르십시오 .

10
MicroSD 카드 슬롯
초기화 버튼 (Reset)
• 카메라를 Wi-Fi 네트워크에 연결하지 못한 경우 Reset 버튼을 5 초동
안길게 누른 후2.2 단계부터 다시 시작하십시오 .
• 다른 Wi-Fi 네트워크를 선택하려면 Reset 버튼을 5 초동안 길게 누른
후장비를 재부팅하십시오 .
3. 이미지 암호화를 활성화합니다 .
활성화되면 비디오와 이미지를 암호화하여 전송할 수있습니다 .
또한 기본 설정된 비밀번호를 변경할 수있습니다 .
- 카메라 설정으로 이동합니다 .
- “Change Password”(비밀번호 변경 )를탭합니다 .

11
- “Edit”(편집 )를탭합니다 .
- 정품 인증 코드를 입력합니다 (인증 코드는 카메라 라벨에
위치합니다 ).
- 새비밀번호를 입력합니다 (6~12 자리 문자 및숫자 ).
4. 각도 조정
EZVIZ 앱을 사용하여 카메라를 조정해 최적의 각도로 맞출 수있습
니다 . 수평 회전 각도 범위는 0°~340°이며 상하 기울임 각도 범위
는-15°~105°입니다 .
이기기는 가정용으로 전자파적합등록을 한기기로서 주거지역은 물론 모
든지역에서 사용할 수있습니다 . 위와 같은 무선설비는 전파혼선의 가능
성이 있으므로 인명안전과 관련된 서비스는 할수없습니다 .
SD 카드 관리
•설치하기 전에 MicroSD 카드를 슬롯에 삽입합니다 .
•MicroSD카드는 박스 내용물에 포함되어 있지 않습니다 . 권장되는 호환성 :
Class 10, 최대 128GB SD 카드 호환 .

12
1. EZVIZ 앱에서 장비 설정 인터페이스의 Storage Status(저장소 상태)를
탭하여 SD 카드 상태를 확인합니다.
2. 메모리 카드 상태가 Uninitialized(초기화되지 않음)로표시되면 탭하여
초기화합니다.
이제 상태가 Normal(정상)로변경되고 비디오 또는 사진을 저장할 수
있습니다.
벽면 장착 (선택 사양 )
본카메라는 벽면 또는 천장에 설치할 수있습니다 .
• 벽/천장은 카메라와 마운트 무게의 3 배를 견딜 수있을 만큼 견고해야 합니
다.
• 카메라는 거울과 같은 반사성 물체로부터 떨어져 있어야 합니다 .
1. 카메라를 설치하려는 자리에 드릴 템플릿을 부착합니다.
2. (시멘트 벽/천장만 해당) 템플릿을 따라 드릴로 나사 구멍을 뚫고 3
개의 칼브럭을 삽입합니다.
3. 템플릿을 따라 3개의 금속 나사를 사용해서 카메라 베이스를 고정
합니다.

13
4. 카메라를 베이스에 설치하고 15°돌려 단단히 고정합니다 .
1
2
5. 전원 케이블을 카메라에 연결합니다 . 이전에 카메라를 Wi-Fi 네트
워크에 연결했던 경우 동일한 Wi-Fi 네트워크에 자동 연결됩니다 .

14
부록
박스 내용물
카메라 (x1) 베이스 (x1)
전원 케이블 (x1) 드릴 템플릿 (x1) 나사 세트 (x1)
전원 어댑터 (x1) 퀵스타트 가이드 (x1)

15
A
입력
B
전원 인터페이스
LED 표시등
스피커
전원 인터페이스
LED 표시등
스피커 LAN 인터페이
스