8
2� Settings
In the settings page, you can set the parameters of the device.
Parameter Description
Name View or tap to customize the name of your device here.
Working Mode You can select one kind of device working modes here.
Intelligent Detection You can select between different detection types for your device.
Notification You can manage the device message and EZVIZ APP notification.
Audio Settings You can set relevant audio parameters for your device.
Image Settings You can set relevant image parameters for your device.
Light Settings
When disabled, the devicell indicator will be off.
Exceptions: The device indicator will still be on, when the device is charging or the
device is exception.
Battery You can see the battery remaining capacity here.
Record List You can see micro SD card capacity, used space and free space here, and also you can
enable or disable cloud storage service here.
Security Settings You can encrypt your videos with encryption password and customize the privacy area.
Network Settings You can see the connection status.
Device Information You can see the device information here.
Share Device You can share the device to you family members or guests.
Delete Device Tap to delete the device from EZVIZ App.
EZVIZ Connect
1� Use Amazon Alexa
These instructions will enable you to control your EZVIZ devices with Amazon Alexa. If you run into any difficulties during the
process, please refer to Troubleshooting.
Before you start, make sure that:
1. EZVIZ devices are connected to the EZVIZ app.
2. In the EZVIZ app, turn off the "Image Encryption" in the Device Settings page.
3. You have an Alexa-enabled device (i.e Echo Spot, Echo-Show, All-new Echo-Show, Fire TV (all generations), Fire TV stick
(second generation only), or Fire TV Edition smart TVs).
4. The Amazon Alexa app is already installed on your smart device, and you have created an account.
To Control EZVIZ devices with Amazon Alexa:
1. Open the Alexa app and select "Skills and Games" from the menu.
2. OntheSkillsandGamesscreen,searchfor"EZVIZ",andyouwillnd"EZVIZ"skills.
3. Select your EZVIZ device's skill, then tap ENABLE TO USE.
4. Enter your EZVIZ username and password, and tap Sign in.
5. Tap the Authorize button to authorize Alexa to access your EZVIZ account, so that Alexa can control your EZVIZ devices.
6. You will see "EZVIZ has been successfully linked", then tap DISCOVER DEVICES to allow Alexa to discover all your EZVIZ
devices.
7. Go back to Alexa app menu and select "Devices", and under devices you will see all your EZVIZ devices.
Voice Command
Discover a new smart device via the "Smart Home" menu in the Alexa app or the Alexa Voice Control function.
Once the device is found, you can control it with your voice. Speak simple commands to Alexa.
Your device's name for example: "show xxxx camera," can be changed in the EZVIZ app. Each time you change the name of the device, you
will need to discover the device again to update the name.
