2). lf the pots/pans are used without being cleaned, discoloration or cooked on stains may be caused.
3). Do not use benzine, thinner, scrubbing brush or polishing powder to clean the induction cooker.
4). Wipe using dish washing agent and damp cloth.
5). Use vacuum cleaner to suck up dirt from the air intake and exhaust vent.
6). Never run water over the unit (Water gets inside may cause malfunction).
vl.r rESH&pTtNG I
$
!
I
8
Error Message Cause Solution
EO No pan or unsuitable pan Use pan or suitable pan
E1 Temperature of IGBT is too
high or the fan inside is not
working,or sencor organ is
failure.
. First Cleaking ventilation
slots if blocked.lf no then let
the device cool off for a few
minutes,then try to operate
the device again .
. Contact supplier to repair
E2 Sensor is failure or the
temperature of the pan is too
high(when the pan is dry or
the unsuitable pan, the
temperatue will be very high,
the induction will cut the
power to protect the lC chip)
. Remove the cookware form
the hob. Let the device cool
off for a few minutes,then try
to operate the device again.
E3 voltage is unusual. .Pls check the voltage
first,then try to operate the
device again.