Factor Electronics HD50-4K-BALUN User manual

1
www.factorelectronics.com
[e-mail]
4159 McConnell Drive Burnaby B.C. Canada V5A-3J7
Tel: [phone]
Mail: [e-mail]
HD50-4K-BALUN
4K/18Gbps HDMI Extender Kit with one-way IR (50M)

2
www.factorelectronics.com
[e-mail]
Thank you for purchasing this product. For optimum performance and safety, please read
these instructions carefully before connecting, operating or adjusting this product. Please keep
this manual for future reference.
SURGE PROTECTION DEVICE RECOMMENDED
This product contains sensitive electrical components that may be damaged by electrical
spikes, surges, electric shock, lightning strikes, etc. Use of surge protection systems is highly
recommended in order to protect and extend the life of your equipment.

3
www.factorelectronics.com
[e-mail]
Table of Content
Introduction.............................................................................................................. 4
Features................................................................................................................... 4
Panel Descriptions.................................................................................................. 5
TX ......................................................................... Error! Bookmark not defined.
RX......................................................................... Error! Bookmark not defined.
IR TX/RX Guidelines.............................................................................................. 6
IR Pin Definition................................................................................................. 6
Application Diagram............................................................................................... 7
Specifications.......................................................................................................... 7
Package Contents.................................................................................................. 8
Maintenance............................................................................................................ 9
Warranty Policy....................................................................................................... 9
Limitations of Warranty .......................................................................................... 9
Exclusive Remedies............................................................................................. 10
RMA Policy............................................................................................................ 10
Standard Replacement .................................................................................... 11
Once you have obtained an RMA number........................................................ 11
Please note...................................................................................................... 11

4
www.factorelectronics.com
[e-mail]
Introduction
This HDMI Extender Kit can extend high definition video / audio signals and one-way IR,
distances up to 164ft /50 meters between the transmitter and receiver over a single Cat5e/6
cable. The HD50-4K-Balun supports resolution up to 4K2K@60Hz 4:4:4, 18Gbps and HDCP
2.2. In addition, the extender is equipped with one-way IR pass-through which allows for
source control and one HDMI loop output.
The HD50-4K-Balun extender kit includes transmitter and receiver units. The transmitter unit
connects to the HDMI input signal and carries the signal over Cat5/6 cable .The receiver
connects to the display HDMI input and also transmits IR control signals.
The extender kit offers the most convenient solution for HDMI extension over a single Cat5e/6
with long distance capability, and is the perfect solution for any HDMI extender application.
Features
HDMI 2.0, HDCP 2.2 / HDCP 1.4 and DVI 1.0 compliant.
Supports 18Gbps bandwidth.
Supports input and output video resolution up to 4k2k@60Hz 4:4:4, extends distance up to
164ft / 50 meters.
Supports one HDMI loop output.
Supports one-way IR pass-through.
Supports HDR function.
Supports PoC (Power over Cable) function, where one 12VDC-1A power adapter, can be
located at the TX or RX balun to power the balun system.)
Supports automatic copy EDID functions.
Compact design for easy and flexible installation.

5
www.factorelectronics.com
[e-mail]
Panel Descriptions
TX (transmitter) Balun
1. HDMI Output –HDMI loop output port connects to any HDMI display device such as a TV
or Projector using an HDMI cable.
2. HDMI Input –Connect to any HDMI source device such as a DVD, computer or gaming
player using an HDMI cable.
3. CAT Output –RJ45 connector, connect to CAT IN port on the receiver unit with Cat6
cable.
4. Service port –Used for possible firmware upgrades
5. IR Out port –3.5mm mono phone jack, connects to the included IR emitter cable.
6. Power port –Use included 12V/1A DC power adapter to power the unit.
RX (receive) Balun
1. HDMI Output –Connect to any HDMI display device such as a TV or a Projector using an
HDMI cable
2. CAT IN –Connect to CAT OUT port on the Transmitter unit with a Cat6 cable
3. Service port –Used for possible firmware upgrades
4. IR IN –3.5mm stereo phone jack, connect to the included IR sensor cable.
5. Power port –Used the included 12V/1A DC power adapter to power the unit.

6
www.factorelectronics.com
[e-mail]
IR TX/RX Guidelines
IR Emitter: Plug in the IR emitter to emit all IR command signals received from the IR receiver
from the other end to control the source devices connected to the HD50-4K-Balun.
IR Receiver: Plug in the IR receiver to receiver all IR command signals from the IR remote
controls connected to the HD50-4K-Balun.
IR Pin Definition

7
www.factorelectronics.com
[e-mail]
Application Diagram
Specifications
Technical
HDMI Compliance
HDMI 2.0
HDCP Compliance
HDCP 2.2 / HDCP 1.4
Video Bandwidth
18Gbps
Video Resolution
Up to 4K60Hz 4:4:4
Color Space
RGB / YCbCr 4:4:4, YCbCr 4:2:2/4:2:0, YUV 4:4:4
Color Depth
8/10/12-bit (1080P60Hz, 4K30Hz, 4K60Hz YCbCr
4:2:2/4:2:0)
8-bit (4K60Hz 4:4:4 )
HDMI Audio Formats
LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby
TrueHD, Dolby Digital Plus(DD+), DTS-ES, DTS
HD Master, DTS HD-HRA, DTS-X
ESD Protection
Human body model —±8kV (Air-gap discharge)
±4kV (Contact discharge)
Connections
Transmitter
Inputs: 1x HDMI Type A [19-pin female]
1x SERVICE [Micro USB, Update port]

8
www.factorelectronics.com
[e-mail]
Outputs: 1x HDMI Type A [19-pin female]
1x IR OUT [3.5mm Stereo Mini-jack]
1x CAT OUT [RJ45, 8-pin female]
Receiver
Inputs: 1x IR IN [3.5mm Stereo Mini-jack]
1x CAT IN [RJ45, 8-pin female]
1x SERVICE [Micro USB, Update port]
Outputs: 1x HDMI Type A [19-pin female]
Mechanical
Housing
Metal Enclosure
Color
Black
Dimensions
Transmitter / Receiver:
61mm [W] x 88mm [D] x 18mm [H]
Weight
Transmitter: 160g, Receiver: 155g
Power Supply
Input: AC 100 - 240V 50/60Hz
Output: DC 12V/1A
Power Consumption
3.84 W
Operating Temperature
32 - 104°F / 0 - 40°C
Storage Temperature
-4 - 140°F / -20 - 60°C
Relative Humidity
20 - 90% RH (no condensation)
Resolution / Distance
4K60 - Feet / Meters
4K30 / 1080P - Feet / Meters
CAT5e
164ft / 50M
164ft / 50M
CAT6/6a/7
197ft / 60M
230ft / 70M
HDMI IN/OUT
10ft / 3M
30ft / 10M
The use of “Premium High Speed HDMI” cable is highly recommended.
NOTE:Specifications are subject to change without notice. Weight and dimensions are approximate.
Package Contents
1) 1x TX (Transmitter)
2) 1x RX (Receiver)
3) 1x 12V/1A DC power supply
4) 1x IR Sensor
5) 1x IR Emitter
6) 4x Rack-mount Ears
7) 1x User Manual

9
www.factorelectronics.com
[e-mail]
Maintenance
Clean this unit with a soft, dry cloth. Never use alcohol, paint thinner or benzene to clean this
unit.
Warranty Policy
Factor Electronics products are warranted against defects in material and workmanship for two
years from the date of shipment. During the warranty period, Factor Electronics will, at its
option, repair or replace products that prove to be defective. Repairs are warranted for the
remainder of the original warranty or a 90 day extended warranty, whichever is longer.
For equipment under warranty, the owner is responsible for freight to Factor Electronics and all
related customs, taxes, tariffs, insurance, etc. Factor Electronics is responsible for the freight
charges only for return of the equipment from the factory to the owner. Factor Electronics will
return the equipment by the same method (i.e., Air, Express, Surface) as the equipment was
sent to Factor Electronics.
All equipment returned for warranty repair must have a valid RMA number issued prior to
return and be marked clearly on the return packaging. Factor Electronics strongly
recommends all equipment be returned in its original packaging.
Factor Electronics’s obligations under this warranty are limited to repair or replacement of
failed parts, and the return shipment to the buyer of the repaired or replaced parts.
Limitations of Warranty
The warranty does not apply to any part of a product that has been installed, altered, repaired,
or misused in any way that, in the opinion of Factor Electronics, would affect the reliability or
detracts from the performance of any part of the product, or is damaged as the result of use in
a way or with equipment that had not been previously approved by Factor Electronics.
The warranty does not apply to any product or parts thereof where the serial number or the
serial number of any of its parts has been altered, defaced, or removed.
The warranty does not cover damage or loss incurred in transportation of the product.

10
www.factorelectronics.com
[e-mail]
The warranty does not cover replacement or repair necessitated by loss or damage from any
cause beyond the control of Factor Electronics, such as lightning or other natural and weather
related events or wartime environments.
The warranty does not cover any labor involved in the removal and or reinstallation of
warranted equipment or parts on site, or any labor required to diagnose the necessity for repair
or replacement.
The warranty excludes any responsibility by Factor Electronics for incidental or consequential
damages arising from the use of the equipment or products, or for any inability to use them
either separate from or in combination with any other equipment or products.
A fixed charge established for each product will be imposed for all equipment returned for
warranty repair where Factor Electronics cannot identify the cause of the reported failure.
Exclusive Remedies
Factor Electronics’s warranty, as stated is in lieu of all other warranties, expressed, implied, or
statutory, including those of merchantability and fitness for a particular purpose. The buyer
shall pass on to any purchaser, lessee, or other user of Factor Electronics’s products, the
aforementioned warranty, and shall indemnify and hold harmless Factor Electronics from any
claims or liability of such purchaser, lessee, or user based upon allegations that the buyer, its
agents, or employees have made additional warranties or representations as to product
preference or use.
The remedies provided herein are the buyer’s sole and exclusive remedies. Factor
Electronics shall not be liable for any direct, indirect, special, incidental, or consequential
damages, whether based on contract, tort, or any other legal remedy.
RMA Policy
When returning product to Factor Electronics for any reason, the customer should fill out the
official RMA form to obtain a RMA number. Without the permission or approval, Factor
Electronics will be no responsible for any return.
This can be initiated by emailing or calling your related sales person
[e-mail] PH:778-800-1918.
All requests are processed within 48 hours.

11
www.factorelectronics.com
[e-mail]
Standard Replacement
For customers that agree to return defective product to Factor Electronics first, a Standard
Replacement option is available.
An RMA numbermust first be issued by sales. This RMA number will need to be referenced on
the outside of the return shipment.
Upon receipt of the defective product, Factor Electronics will, at its discretion, either repair or
replace the product and ship it out in the most expeditious manner possible. Subject to
availability, the replacement product will be shipped on the business day following receipt of
the defective product.
In the event the product returned to Factor Electronics has been discontinued (i.e. the product
is no longer being manufactured by Factor Electronics but is still under warranty), Factor
Electronics will, at its discretion, either repair or replace with recertified product.
Once you have obtained an RMA number
After obtaining an RMA number from Factor Electronics, you must send the product - freight
prepaid - to Factor Electronics The Factor Electronics RMA number must be prominently
displayed on the outside of your package. If you send your product to Factor Electronics
without the RMA number prominently displayed on the outside of the package, it will be
returned to you unopened.
Please use a shipping company that can demonstrate proof of delivery. Factor Electronics
does not accept responsibility for any lost shipments unless proof of delivery to Factor
Electronics is provided.
Please note
Product shipped to Factor Electronicsmust be properly packaged to preventloss or damage in
transit.
Shipping your RMA to Factor Electronics using regular mailing envelopes is not acceptable, as
they do not protect the product from damage during shipping.
Factor Electronics will not repair or replace a module that is shipped in such a way that the
product is not properly protected.

12
www.factorelectronics.com
[e-mail]
Factor Electronics will not accept any product that has been damaged as a result of accident,
abuse, misuse, natural or personal disaster, or any unauthorized disassemble, repair or
modification.