Faithfull FAIAUTYINFLO User manual

10
20
30
40
50
0
7
6
5
43
2
1
TYRE INFLATOR
FAI AUTYINFLO
100psi/7bar
Thank you for purchasing the Tyre Inator Air Compressor. With minimal care
and proper treatment, it will provide years of reliable service.
Please read and understand all operating instructions carefully before use.
KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
DC12Volt

2 3
GENERAL SAFETY RULES
● Before using this product, please
check the lighter socket (12V DC
output) to make sure there is no
rust or any other residue in order
to prevent any damage or danger
caused by poor conductivity and
power supply overheating.
● Please check the recommended
air pressure of the vehicle tyres
and carefully watch the pressure
gauge while inating to avoid over-
ination.
● You should start the engine when
using the air compressor to ensure
the battery capacity is maintained
and pump work normally.
● Do not touch the air hose while in
use or just after use.
● After 10 minutes of continuous use,
switch off the inator for 20 minutes
to allow the unit to cool down.
● After use, please tuck the power
cord and air hose into their locking
slots to prevent any damage to the
power cord and hose.
● Use only 12V direct current power
sockets. Do not use this product
with any other type of power
source.
● Do not tangle the power cord
together to avoid potential electrical
danger.
● If the unit emits an abnormal noise
please stop and immediately check
for the cause of the problem.
● Keep children away from this
compressor while in use.
● Avoid dropping the product and/
or causing severe impacts to the
compressor.
● Do not over expose the unit to
direct sunlight.
● Do not use in damp areas or
around ammable materials.
● Do not attempt to make any
modications, disassemble or
repair this product either by
yourself or by any non-technicians.
USING THE AIR COMPRESSOR
1. Attach the air nozzle to the tyre
valve and tighten it clockwise.
2. Start the vehicle’s engine.
3. Plug the 12V DC adapter into the
cigarette lighter socket.
4. Press the Power Switch to ON to
start the air compressor. Carefully
observe the air pressure using
the Pressure Gauge and press
the Power Switch to OFF once
the desired PSI/BAR pressure is
reached.
5. Lift the thumb lock up and pull off
the air hose from the tyre valve.
Remove the 12V adapter from the
cigarette lighter socket.
6. Turn off the car engine.
7. Wrap the wire and air hose and
tuck them into their locking slots.
CAUTION
Always check and inate tyres when cold, never just after driving your vehicle
as the heat in the tyres will give a false higher reading.
The gauge is for indication purposes only. It is recommended you check your
tyre pressures with a calibrated gauge.

2 3
● Use only 12V direct current power
sockets. Do not use this product
with any other type of power
source.
● Do not tangle the power cord
together to avoid potential electrical
danger.
● If the unit emits an abnormal noise
please stop and immediately check
for the cause of the problem.
● Keep children away from this
compressor while in use.
● Avoid dropping the product and/
or causing severe impacts to the
compressor.
● Do not over expose the unit to
direct sunlight.
● Do not use in damp areas or
around ammable materials.
● Do not attempt to make any
modications, disassemble or
repair this product either by
yourself or by any non-technicians.
FEATURES
● Superior quality and convenient to
use.
● Strong, impact resistant housing.
● 12V DC powered.
● High quality air nozzle.
● Easy to use air pressure gauge.
● Special winding design for cable
and air hose makes the product
compact and effectively protects
the wire and air hose.
● Offers a wide range of applications.
The three extra adapters can be
used for bicycles, motorcycles,
sports equipment and other
inatable items. Use it to keep your
car tyres correctly inated which
helps extend their life and improve
fuel efciency.
USING THE AIR COMPRESSOR
1. Attach the air nozzle to the tyre
valve and tighten it clockwise.
2. Start the vehicle’s engine.
3. Plug the 12V DC adapter into the
cigarette lighter socket.
4. Press the Power Switch to ON to
start the air compressor. Carefully
observe the air pressure using
the Pressure Gauge and press
the Power Switch to OFF once
the desired PSI/BAR pressure is
reached.
5. Lift the thumb lock up and pull off
the air hose from the tyre valve.
Remove the 12V adapter from the
cigarette lighter socket.
6. Turn off the car engine.
7. Wrap the wire and air hose and
tuck them into their locking slots.
3 nozzle adaptor
Air pressure gauge Compressor
power switch
Air nozzle Power cord
12V DC adaptor
Air hose
CAUTION
Always check and inate tyres when cold, never just after driving your vehicle
as the heat in the tyres will give a false higher reading.
The gauge is for indication purposes only. It is recommended you check your
tyre pressures with a calibrated gauge.

TYRE INFLATOR
FAI AUTYINFLO
The Faithfull Tools Catalogue
features approximately 3,500 products.
Ask your local Faithfull Tools stockist for
a copy, or contact the address below.
FAITHFULL TOOLS
Long Reach, Galleon Boulevard,
Crossways Business Park, Dartford,
Kent, DA2 6QE, United Kingdom
E-mail: [email protected]
www.faithfulltools.com