F&U FL24114 User manual

MODEL:FL24114

USB
Note: The key instructions are subject to below.
Display \ Hide key icon: When there is no button icon popping up, press the key, the key
icon will pop up like the picture shows above, the key icon will automatically turn off after 5
seconds of inactivity.
Icon selection: Short press the button, move the loop to the right, select the icon.
Icon function selection: Long press the key to achieve the function of the selected icon.
Icon Description:
: Power off Icon: Corresponding to the "POWER" button of remote .
: Menu Icon: Corresponding to the "MENU" button of remote.
: Source Icon: Corresponding to the "SOURCE" button of remote.
: Volume+ Icon: Corresponding to the "VOL+" button of remote.
: Volume- Icon: Corresponding to the "VOL-" button of remote.
: CH+ Icon: Corresponding to the "CH+" button of remote.
: CH- Icon: Corresponding to the "CH-" button of remote.

USB

Turn on TV
3.Connect the power supply,
enter the standby mode (red light),
press the power button of the TV or
the power button on the remote control
to turn on the TV.
The stand of some TV models is designed with
snap-in type, easily installed by snapping into
stand groove, instead of screw.
Suggestion:
To make it more convenient for base installation and to
avoid any risk of scratches and damage, we advise you
using the type of PH2 screwdriver.
PH00 PH0 PH1 PH2
X X X

0000/8888