F&V Z720 UltraColor User manual

For more information visit: fvlight.com
F&V Photographic Industry B.V.
Steenovenweg 5, 5708HN Helmond, The Netherlands
TM & © F&V All rights reserved.
F&V Wi Dedicated Controller is optional accessories.
Create and Save Your Scenes
The Z720 has a built in WiFi module that allows you to control the light via your mobile
phone or F&V Wi Dedicated Controller. You can even save the exact settings and recall
it any time.
WiFi Module
Quick Start Guide
1
What’s in the box?
15mm LWS & 19mm Studio
Rail Mount
5/8” Light Stand Mount
(16mm)
Tungsten* / Frost Diffusion / Milk Diffusion Filter
* Only comes with daylight model
D-tap to DC Cable
Z720 Ring Light
Z720 UltraColor
Ring Light
Getting Started
2Functions
Pro Case for Z720

DC Φ2.5
10-18 V
4
3
3
Three mounting options
15mm LWS Rail Mount & 19mm Studio Rail Mount 5/8” Light Stand Mount (16mm)
Mount
1
1 2
2
2
Adjust the Intensity
1
Use the <Intensity> knob to adjust the light’s intensity
* Adjust the Color Temperature (only the bi-color version)
2
Use the <Color Temperature> knob to adjust the color temperature
3
Press and hold the <MENU> button to enter the Extended Menu. Using the < > and < >
button, select between Group 0 or Group 1. Group 0 enables IQC. Group 1 disables IQC.]
1Getting Started 2Functions
POWER
ON/OFF
LCD
Display
Menu Button
& Directional
Pad
NP-F
Li-ion
Battery
1
NP-F
Li-ion
Battery
1
Light-
Stand
Mount
Rail
Mount
15mm
& 19mm
16mm
⅝”
11 2
Intensity
Knob
* Color
Temperature
Knob
Antenna
Two power options
NP-F Li-ion battery
DC Φ2.5 6.8-18V
Power
2
1
2
<I> when powering through DC Jack
<II> when using NP-F batteries
Turn the light ON
Let’s do this!
3
LCD Display
While in use, the LCD will display the light’s intensity. Press the <Menu> button and
the LCD will change to show you:
View the current intensity
→* The current color temperature (only the bi-color version)
→The current energy level of your rst battery or the AC adapter’s efciency
→The energy level of your second battery
4Independent Quadrant Control (IQC)
Start IQC
When IQC is enabled, exit the menu, and use the directional arrows to select the quadrants you
want to control. The illuminated quadrants on the LCD correlate to the quadrants you will control.