Fantasea Line UWL-09F User manual

UWL-09F Wide Angle Lens Instruction Manual 20190213

Fantasea Line
UWL-09F
Wide Angle Lens
Cat. No. 5157
Instruction Manual

UWL-09F Wide Angle Lens Instruction Manual 20190213

DISCLAIMER
While every effort has been made in order to ensure that the information included in this
instruction manual is accurate and complete, no liability will be accepted for any errors or
omissions. Fantasea Line reserves the right to change product specifications and features
described herein at any time without prior notice. No part of this instruction manual may be
copied, translated or reproduced without the prior written permission of Fantasea Line.
Fantasea Line makes no warranties aside from limited product warranty as described at the
end of this manual.
INTRODUCTION
The Fantasea UWL-09F Wide Angle Lens is a quality “wet” wide angle conversion lens that
fits onto the housing 67mm lens port thread and can be installed and removed during the
course of the dive. It is perfect for photographing seascapes, divers, ship wrecks and schools
of fish without moving further away from the subject, thereby still taking full advantage of
water clarity and artificial light sources.
The UWL-09F Wide Angle Lens can be mounted directly on top of 67mm threaded housing
lens ports or on top of lens ports featuring a different thread, by using a compatible
adaptor.
SPECIFICATIONS
67mm thread mount
Bezel / Barrel Material: Aluminum alloy with black hard anodize, ABS
Lens Material: 5 groups and 5 elements
Lens coating: Hard coating on the Polycarbonate dome lens + Multi layer AR coating
on all glass lenses
Depth rated to 100 meters / 330 feet
Magnification: 0.45X
Angle of View: 127 degrees*
*Diagonal angle of view (or field of view) on land, using a focal length equivalent to 24 mm
with a 35 mm format image sensor. To understand how this lens performs using a specific
camera, please check our compatibility tables or contact us.
Weight (on land): 1033 g / 36.4 oz
Dimensions (diameter x height): 133.3 x 94.4 mm / 5.2 x 3.7 inch
Included in package: Front and rear lens covers, type-B adaptor kit, lens padded
carrying case, secure string kit and microfiber cloth

UWL-09F Wide Angle Lens Instruction Manual 20190213

INCLUDED IN PACKAGE
1. UWL-09F Macro Lens
2. Rear cap
3. Front cap
4. Microfiber cloth
5. Type B Adaptor Kit
6. Secure string kit
7. Padded carrying case
Type B Adaptor
2.5mm Allen Key
Secure String
2mm Allen Key
Secure loop
Short screw
1
2
3
4
5
6
7

UWL-09F Wide Angle Lens Instruction Manual 20190213

COMPATIBILITY
The UWL-09F Wide Angle Lens can be mounted on 67mm threaded lens ports or other lens ports
by using an adaptor. For a selection of adaptors available, please visit our website -
www.fantasea.com
INSTRUCTIONS FOR USE
1. Please use the utmost care and do not use excessive force when assembling and
disassembling the lens, in order not to cause any damage to the product.
2. The UWL-09F lens comes with the type-A adaptor preassembled. This adaptor allows
mounting the lens on almost all housing lens ports featuring a 67mm thread. Note that
an additional narrower adaptor is separately included in the package and marked as
type-B adaptor. When installed on the UWL-09F Lens instead of the type-A adaptor, the
type-B adaptor allows the lens glass to be positioned closer to the housing lens port and
the camera lens (image #1), resulting with even better optic performance and enhanced
results. This configuration, however, is only compatible with some of the housings.
Image #1

UWL-09F Wide Angle Lens Instruction Manual 20190213

If it seems that your housing lens port might be compatible with the type-B adaptor setup,
you might consider replacing the preassembled type-A adaptor with type-B adaptor:
a. Place the lens on a working surface so that the dome is facing downwards and the
thread is facing upwards. To protect the lens, cover the working surface with soft
cloth and leave the front neoprene cover assembled on the lens.
b. Remove the rear cap of the lens by unscrewing it until it separates from the lens.
c. Use the larger Allen Key (2.5mm)
included with the Type B Adaptor Kit
in order to unscrew all of the screws
installed on the rear side of the lens
(image #2).
d. Remove the type-A adaptor from the
lens and install the type-B adaptor
instead, so the screw holes on the
adaptor are aligned with the screw
holes on the lens.
e. Using the 2.5mm Allen Key, reinstall
the screws to secure the type-B
adaptor in place.
f. Test the configuration by screwing the lens on to your housing lens port (image #3
and 4). If the lens properly screws all the way in and sits within a fixed and stable
position, the configuration is most likely compatible with your housing. Otherwise,
replace the type-B adaptor with the type-A adaptor again.
Image #2
Image #3
Image #4

UWL-09F Wide Angle Lens Instruction Manual 20190213

3. Install the secure string on the lens:
a. Use the larger Allen Key (2.5mm) included with the Type B Adaptor Kit in order
to unscrew one of the screws installed on the rear side of the lens (image #5).
Remove the screw and store it for possible future use (image #6).
b. Place the secure loop included with the
Secure String Kit over the empty screw
hole on the lens, so the screw hole on
the secure loop is aligned with the screw
hole on the lens. The short screw
included with the Secure String Kit should
be used to install the secure loop
(image #7).
c. Use the smaller Allen Key (2.0mm)
included with the Secure String Kit in
order to tighten the short screw until the
secure loop is firmly positioned on the
lens (image #8 on the following page).
d. Install the secure string by inserting it
through the secure loop, then pulling it through itself and testing it in order to
make sure it is secure (image #9 on the following page).
e. It is recommended to attach the secure string of the lens to the housing, in order
to secure the lens. If making use of an arm in the system, secure strings can be
secured to the arm rather than to the housing.
Image #5
Image #7
Image #6

UWL-09F Wide Angle Lens Instruction Manual 20190213

4. Install the lens by screwing it on to your housing lens port (images #3 and 4 on page 5).
5. It is recommended to apply a small amount of silicone grease on the threaded area in
order to prevent corrosion. Make sure that no grease is applied over the lens glass.
6. Once the lens is installed on the housing lens port, test the mount to make sure it’s
stable and that the lens sits within a fixed and secure position.
7. During the dive, install the lens by screwing it on your housing lens port. Avoid
tightening the lens too hard onto the housing port, filter or adaptor, as this might result
in difficulty with removal.
8. Once the lens has been installed on the housing lens port, align the wings by carefully
swiveling them so that the longer wings are positioned vertically - on the bottom and
top. This will prevent the wings from being visible in images captured. Note that
swiveling the wings for the first time might require applying additional pressure.
9. Note that water must enter the gap between the lens port and UWL-09F lens glass
when using the lens underwater. Therefore, when diving with the lens, it is best to
install it underwater. Before capturing images, make sure that the gap between the wide
angle lens and the housing lens port fills with water and that there are no air bubbles
trapped there.
10.The UWL-09F Lens can be removed and installed repeatedly throughout the course of
the dive.
IMPORTANT NOTICE
The UWL-09F Lens should only be screwed till the point of minimal resistance.
Continuing to screw the lens further than this point will make it difficult to remove it
later on. If this happens, in order to remove the lens, please use a slight amount of
pressure against the dome or plastic protector wings by pushing in and turning
counter clockwise at the same.
Image #8
Image #9

UWL-09F Wide Angle Lens Instruction Manual 20190213

11.Note that prior to unscrewing the lens from the housing lens port, the secure string clip
attached to the housing or arm should be released.
12.When removing the UWL-09 Lens from the housing, it can be conveniently stored by
attaching it to the EyeGrabber F67, which mounts on any standard Flex or B&J Arm, or a
different EyeGrabber Lens Holder if using an adaptor with the lens. For a selection of
EyeGrabber Lens Holders available, please visit our website - www.fantasea.com
13.During the beginning of your dive, the lens might become foggy as a result of an increase in
the air temperature inside the lens, following submersion in cooler water. Storing the lens in
a cool dry place when not being used, such as a padded housing bag with a few silica gel
packs inside, and submerging it in cool water for 10 minutes prior to the dive, will assist in
preventing such condensation. However, even if the lens starts fogging up at the beginning of
the dive due to temperature differences, note that continuing to dive with it for about 10
minutes will eventually dissolve the fog.
14.It is recommended to use an external strobe when the UWL-09F Lens is mounted on the
housing. The UWL-09F Lens blocks the camera internal flash, resulting in underexposed or
shaded images.
15.When using an external flash or shooting against the sun, there are a few techniques that
should be followed in order to avoid a lens flare, which is often encountered when using
dome ports of any kind due to the reflection of the sun or strobe:
a. Images in which the sun is captured can be usually taken during mornings or
afternoons, when the sun is not as strong as during the middle of the day. In general,
the sun will have a much softer and successful effect during early and late hours of
the day and will also cause less of a flare.
b. Make sure that the strobe is not positioned towards the lens. When shooting a
nearby subject, for instance, it is better to position the strobe a little bit in front of
the camera housing rather than behind it (so the light doesn't reflect on the Wide
Angle Lens), or if you choose to position the strobe behind the camera housing,
make sure it's not pointed directly towards the lens, but a little bit tilted towards the
side.
16.After the dive, detach the wide angle lens and all components from the housing lens
port and rinse them in fresh water.
17.Dry and store in a safe protected place.

UWL-09F Wide Angle Lens Instruction Manual 20190213

CARE & MAINTENANCE
1. Please use the utmost care and do not use excessive force when assembling and
disassembling the different accessories, in order not cause any damage to the product.
2. Keep the lens away from extreme high temperatures, as under direct sunlight, since it might
damage lens.
3. Do not clean the lens with any chemical solvents or other materials, which might cause
damage to the lens.
4. Never look at the sun through the lens.
5. When mounting the lens on a housing lens port, it is recommended to follow the guidelines
below in order to avoid wearing out the threads of the lens and housing over time:
a. Prior to installing the lens on the housing, it is recommended to apply a small
amount of silicone grease on the threaded area of the lens (and adaptor, if used) to
reduce the amount of friction.
b. Install the lens on the housing lens port underwater only and remove it prior to
ending the dive. Once removed, the lens can be mounted on a lens holder. Avoid
having the lens assembled on the housing on land as much as possible, as it is
heavier and exerts more pressure on the threads.
c. It is recommended to reduce wearing of the threads by using lens mounting
accessories such as bayonet mounts or flip adaptors.
6. After Dive Care:
a. Detach the lens from the housing lens port and rinse all lens components in fresh
water.
b. To ensure that the accumulated salt has completely dissolved, it is recommended to
soak the lens in warm fresh water once in a while.
c. Wipe the water drops with a soft cloth. Do not leave any droplets to dry on lens
surface, as permanent water spots may remain.
d. When storing the lens and during transportation, make sure that it is properly
protected in order to prevent scratches, cracks or any other damage to the lens.
e. Store the lens in a dry and protected area. Storing the lens in a low humidity
environment will decrease the chances of the lens fogging up when submerged in
water.
f. Do not store the lens in presence of chemicals, solvents or fuels.

UWL-09F Wide Angle Lens Instruction Manual 20190213

FANTASEA PRODUCT CONSUMER LIMITED WARRANTY
“Fantasea” warrants this Fantasea Line branded product against defects in materials and
workmanship under reasonable use for a period of ONE (1) YEAR, (two years, where required by
law as determined by the origin of the authorized dealer). This warranty is effective from the
date of retail purchase from Fantasea or an authorized Fantasea dealer, by the original end-user
purchaser (“Warranty Period”). This warranty does not cover any commercial use of the product.
If a product defect arises and a valid claim is received within the Warranty Period, at its option,
Fantasea, or its authorized service facilities will either (1) repair the product defect at no charge,
(2) exchange the product with a product that is new or which has been manufactured from new
or serviceable used parts and is at least functionally equivalent to the original product. The
warranty will not extend beyond the original warranty period.
Your Fantasea Product should be registered within 30 days of purchase. You must keep the
proof of purchase which indicates the date on which the purchase was made; as you may be
required to show proof of purchase if you need warranty service. The following conditions apply:
1. This warranty extends to the original purchaser only. It is not assignable or transferable. 2.
The warranty does not cover damage resulting from misuse, abuse, negligence, or accidents.
Proper maintenance of the Product is the responsibility of the owner. 3. The warranty does not
cover damage directly or indirectly resulting from the use of unauthorized replacement parts or
service performed by unauthorized facilities. 4. This warranty does not cover any damage to any
other product used in conjunction with the Fantasea product, including cameras and lenses, and
resulting from any defect in the product materials or workmanship. 5. The cost of sending the
product back to Fantasea or its authorized service facilities is the responsibility of the customer.
6. The warranty does not cover any incidental damages resulting from any defects in the
product. This expressly includes any travel reimbursements or any other costs associated with
the purchaser’s optional use of the product. The conditions of this warranty are expressly in lieu
of all other expressed warranties, including the payment of consequential or incidental damages
for the breach of any warranty. Please register your product on line at this URL:
http://www.fantasea.com/registration.
www.fantasea.comor visit our [e-mail], please contact us atFor further info