Fantasea BlueRay Illuma User manual

1
Fantasea BlueRay Illuma Dive Light Instruction Manual 20121205
Fantasea BlueRay Illuma Dive Light
(Cat. No. 6032)
Instruction Manual
The BlueRay Illuma Dive Light is a powerful,
durable and stylish waterproof light. It is a
perfect light for night dives, wreck diving
and as a modeling or focus light for
underwater photography. The IlIuma
features a wide, even beam, allowing for a
great angle of coverage and clear view
during the dive.
Color temperature of the light is designed to
reveal the true and vivid colors of fish and
underwater scenery. 2-level adjustable
power output enables controlling the intensity of the beam and extending burn time when
full power of the light isn’t required.
The light also features a stylish, lightweight and ergonomic design.
Depth rated to 100 meters/330 feet, the BlueRay Illuma Dive Light fulfills the needs of both
recreational and technical divers.
Specifications
Depth ratio: 100 meters / 330 feet
Maximum output: 400 lumens
Beam angle: 75 degrees
Material: Aluminum head, Polycarbonate body
Battery requirements: 6 x AAA batteries
Burn time:
o60 minutes (100% power)
o250 minutes (40% power)
LED Lifespan: 30,000 hours
Color temperature –approx. 6,000K
Operation modes:
o100% power
o40% power
Dimensions: 47 x 164mm (diameter x length)
Weight: 145g (without battery)
Includes: Hand lanyard and instruction manual
Optional YS Mount available –BlueRay YS Mount A (Cat. No. 4028)
Optional Red Filter available - RedEye Filter ORF47 (Cat. No. 5186)

2
Fantasea BlueRay Illuma Dive Light Instruction Manual 20121205
Instructions for Use
A. Installing & Removing Batteries
a. To open the BlueRay Illuma Dive Light, hold the hand grip firmly in one hand
with the hand grip pointing towards your body and the LED head pointing
away. Turn the LED head clockwise until it separates. Pull the LED head off.
Please make sure that the light is pointed in a slightly upward position so
the battery cartridge inside the light does not fall out when the light is
opened.
b. Take the battery cartridge out of the light by turning the body of the light
upside down. Make sure to grasp the battery cartridge as soon as it comes
out from the light so it doesn’t fall out.
c. Install or remove 6 x AAA batteries inside the battery cartridge. Make sure
to follow the instructions diagrams printed on the interior of the battery
cartridge. Note that there are three sets of two batteries, each set pointing
towards a different direction.
d. Install the battery cartridge back into the body of the light so that the end
with the round contacts faces the opening and towards the LED head.
e. Re-install the LED head on the opening, carefully aligning it with the thread
on the body of the light and tightening it evenly in a counterclockwise
fashion. Do not use force and do not allow it to screw down unevenly.
Tighten the LED head until the light goes on and then unscrew it clockwise a
bit, just enough for the light to turn off. Once the light is turned off, do not
continue turning the LED head, or else the watertight seal of the light may
be affected and possible flooding may result.
f. Take special care not to stare into the light beam or shine it into the eyes of
anyone else, because the light is powerful and could damage ones’ eyes.
g. It is recommended to occasionally apply a slight amount of silicone grease to
the black O-ring seal found below the threads of the body of the light prior
to replacing the LED head.
B. Turning the BlueRay Illuma Dive Light On/Off
a. In order to switch the light on, hold the hand grip firmly in one hand with
the hand grip pointing towards your body and the LED head pointing away.
Carefully turn the LED head counterclockwise all the way to the end.
b. In order to switch the light back off, turn the LED head in a clockwise fashion
just enough for the light to turn off.

3
Fantasea BlueRay Illuma Dive Light Instruction Manual 20121205
c. Once the light is turned off, do not continue turning the LED head, or else
the watertight seal of the light may be affected and possible flooding may
result.
d. Please note: If you are turning the LED head more than half a turn and
nothing happens, you are probably turning it the wrong way.
e. Note that the BlueRay Illuma Dive Light features two power output levels:
100% and 40%. In order to switch between the two power output levels,
once the light is turned on, turn the LED head clockwise just enough for the
light to turn off and then turn it counterclockwise until it turns on again.
Each time the light is turned off and on again alters the output level.
C. Mounting the BlueRay Illuma Dive Light on an Arm
a. An optional BlueRay YS Mount A (Cat. No. 4028) enables mounting the
BlueRay Illuma Dive Light on any arm or connector that features a standard
YS Mount at the top, such as on Fantasea Flex Arms.
b. In order to install the BlueRay YS Mount A on the BlueRay Illuma Dive Light,
first apply a slight amount of silicone grease on the two O-rings featured on
the interior of the YS Mount without removing them. This will allow for a
smoother installation.
c. Remove the hand lanyard from the light.
d. Install the YS Mount by sliding it on the body of the light, starting from its
rear end and all the way towards the LED head, till it reaches a widening and
can no longer be slid forward.
e. Re-install the hand lanyard back on the light.
f. Remove the screw from the bottom of the YS Mount by unscrewing it all the
way out.
g. Position the BlueRay Illuma Dive Light over the arm so that the YS Mount on
top of the arm is aligned with the YS Mount at the bottom of the LED light.
h. Install the screw all the way through the YS Mount and arm connectors.
Tighten it enough to keep the LED light in a fixed position.
D. Care & Maintenance
a. After each dive, carefully soak and rinse exterior components in fresh water.
b. Store the BlueRay Illuma Dive Light in a protected, dry and shaded area.
c. Remove batteries when storing the LED light for an extended period of time.
d. Please note that there is never a need to use force when closing or opening
the light or when turning it on or off.

4
Fantasea BlueRay Illuma Dive Light Instruction Manual 20121205
Fantasea Products Consumer Limited Warranty
“Fantasea” warrants this Fantasea Line branded product against defects in
materials and workmanship under reasonable use for a period of ONE (1) YEAR,
(two years, where required by law as determined by the origin of the authorized
dealer). This warranty is effective from the date of retail purchase from Fantasea
or an authorized Fantasea dealer, by the original end-user purchaser (“Warranty
Period”). This warranty does not cover any commercial use of the product. If a
product defect arises and a valid claim is received within the Warranty Period, at
its option, Fantasea, or its authorized service facilities will either (1) repair the
product defect at no charge, (2) exchange the product with a product that is new
or which has been manufactured from new or serviceable used parts and is at
least functionally equivalent to the original product. The warranty will not extend
beyond the original warranty period.
Your Fantasea Product should be registered within 30 days of purchase. You
must keep the proof of purchase which indicates the date on which the purchase
was made; as you may be required to show proof of purchase if you need
warranty service. The following conditions apply: 1. This warranty extends to the
original purchaser only. It is not assignable or transferable. 2. The warranty does
not cover damage resulting from misuse, abuse, negligence, or accidents. Proper
maintenance of the Product is the responsibility of the owner. 3. The warranty
does not cover damage directly or indirectly resulting from the use of
unauthorized replacement parts or service performed by unauthorized facilities.
4. This warranty does not cover any damage to any other product used in
conjunction with the Fantasea product, including cameras and lenses, and
resulting from any defect in the product materials or workmanship. 5. The cost of
sending the product back to Fantasea or its authorized service facilities is the
responsibility of the customer. 6. The warranty does not cover any incidental
damages resulting from any defects in the product. This expressly includes any
travel reimbursements or any other costs associated with the purchaser’s
optional use of the product. The conditions of this warranty are expressly in lieu
of all other expressed warranties, including the payment of consequential or
incidental damages for the breach of any warranty. Please register your product
on line at this URL: http://www.fantasea.com/registration.
www.fantasea.com/contactFor further information, please contact us at
www.fantasea.comor visit our website