Fantasea EyeDaptor MPK-F67 User manual

EyeDaptor MPK-F67 Instruction Manual
Fantasea EyeDaptor MPK-F67
(Cat. No. 4711)
Instruction Manual
The EyeDaptor MPK-F67 enables mounting
accessory lenses and filters with a 67mm thread
mount on the Sony MPK-WE, MPK-WEB, MPK-WD
and MPK-WF housings.
Mounting Lens Accessories with a 67mm Thread
Mount on Sony MPK-WE/WEB/WD/WF Housings:
1. Please use the utmost care and do not use excessive force when assembling and
disassembling the different lens accessories, in order not to cause any damage to
the products.
2. Install the EyeDaptor MPK-F67 by attaching it to the housing lens port:
a. Hold the adaptor in front of the housing lens port so that the “TOP” marking
printed on the adaptor configuration is pointed upwards (image A).
Image A

EyeDaptor MPK-F67 Instruction Manual
b. To install the adaptor, push it against the lens port starting from the bottom
(image B) and proceeding towards the top (image C).
c. After adaptor installation, make sure it is properly attached by gently trying
to pull it out. If properly installed, the adaptor should not easily come off the
lens port.
3. Attach the secure line to the adaptor and the housing, in order to secure the lens
and adaptor to the housing.
4. During the dive, install the 67mm threaded accessory lens on the thread of the
EyeDaptor MPK-F67 by gently screwing it in. The accessory lens can be installed and
removed during the course of the dive.
5. After the dive, detach the accessory lens and adaptor from the housing lens port and
rinse all lens components in fresh water. In order to remove the adaptor from the
housing lens port, first detach the secure line and then gently push the adaptor off,
starting from the top and proceeding with the bottom.
6. Dry and store in a safe protected place.
For further information please contact us at http://www.fantasea.com/contact or visit our
website at www.fantasea.com.
Image B
Image C