Fantic Motor XXF 250 User manual

USER MANUAL
en
READ THIS MANUALE CAREFULLY BEFORE OPERATING THIS VEHICLE
FOUR STROKE 250 FOUR STROKE 450
FOUR STROKE 250 FOUR STROKE 450
CODE 08695005

Introduction
USE AND MAINTENANCE MANUAL
INTRODUCTION4-Strokes - Edition 00 / 2022
1
FANTIC WANTS TO THANK YOU
for choosing one of its products.
We recommend that you read this manual before driving your vehicle. It contains information, advice and warnings on the vehicle
maintenance and use. The instructions in this manual have been prepared to give you a simple and clear guide for use. We are sure
that taking it into consideration you will gain confidence with your new vehicle, which you can use for a long time and with full
satisfaction.
MANUFACTURER DATA AND EDITION
Fantic Motor
Via Tarantelli, 7
31030 - Dosson di Casier (TV) Italy
Tel. [phone]
Fax [phone]
E-mail: [e-mail]
www.fantic.com
Edition: 00/2022.
Code: 08695005.

13 MotoreIntroduction
USE AND MAINTENANCE MANUAL
INTRODUCTION4-Strokes - Edition 00 / 2022
2
Introduction
This manual was prepared by Fantic Motor for use by Fantic Motor dealers and their specialized personnel. It is assumed that
those who use this documentation for repair and maintenance of Fantic Motor vehicles have a basic knowledge of the principles
and mechanical procedures regarding vehicle repair techniques. In the absence of these notions, repair or maintenance may be
inadequate or dangerous.
Fantic Motor is constantly committed in improving its production. Any significant modifications and changes introduced with regard
to vehicle characteristics and repair procedures will be brought to the attention of all Fantic Motor dealers and will be published in
future editions of the manual.
Fantic Motor reserves the right to modify and make changes, at any time and without notice, to the models described,
specifications and design data, guaranteeing the essential characteristics described and illustrated in this manual.
Operators have the obligation to read the manual and to scrupulously follow the instructions given. The manufacturer
is not responsible for damages caused to people and/or things and is not responsible for damages to the product, if the
instructions given in this manual are not observed.
This publication, or part of it, cannot be reduced or translated without the Fantic Motor’s approval. Reproduction of the
contents used in this manual without the Manufacturer’s permission is prohibited. Fantic Motor assumes no responsibility
for printing errors and omissions. All rights reserved.

INDEX
USE AND MAINTENANCE MANUAL
4-Strokes - Edition 00 / 2022
3
1. General information ...............................................................................................................................8
1.1 Warnings .......................................................................................................................................................8
1.2 Symbols used in the manual ..................................................................................................................... 10
1.3 Behaviour and driving ............................................................................................................................... 11
Vehicle use .................................................................................................................................................. 11
Getting on ................................................................................................................................................... 11
Getting off ................................................................................................................................................... 11
1.4 Frame number ............................................................................................................................................ 12
1.5 Engine number ........................................................................................................................................... 12
XXF 250 / XEF 250 versions ........................................................................................................................ 12
XXF 450 / XEF 450 versions ........................................................................................................................ 12
1.6 Location of important labels ..................................................................................................................... 13
1.7 Vehicle component location ..................................................................................................................... 15
Handlebar components (XEF 250 version) ............................................................................................... 15
Right and left side components (XEF 250 version) .................................................................................. 16
Handlebar components (XXF 250 version) ............................................................................................... 17
Right and left side components (XXF 250 version) .................................................................................. 18
Handlebar components (XEF 450 version) ............................................................................................... 19
Right and left side components (XEF 450 version) ..................................................................................20
Handlebar components (XXF 450 version) ............................................................................................... 21
Right and left side components (XXF 450 version) .................................................................................. 22
1.8 Technical data ............................................................................................................................................23
Technical Data (versions XXF 250 / XEF 250) ............................................................................................23
Technical Data (versions XXF 450 / XEF 450) ............................................................................................26
1.9 Tightening torques .....................................................................................................................................29
Engine tightening torques (XEF 250 / XEF 450 versions) .........................................................................29
Chassis tightening torques (XEF 250 / XEF 450 versions) ........................................................................32
Engine tightening torques (XXF 250 version) ...........................................................................................35
Chassis tightening torques (XXF 250 version) ..........................................................................................37
Engine tightening torques (XXF 450 version) ...........................................................................................40
Chassis tightening torques (XXF 450 version) ..........................................................................................42
Electrical tightening torques (all versions) ..............................................................................................44
1.10 Maintenance limits ...................................................................................................................................45
Engine (XXF 250 / XEF 250 versions) .........................................................................................................45
Motore (XXF 450 / XEF 450 versions) .........................................................................................................47
Chassis ........................................................................................................................................................49
Electrical ..................................................................................................................................................... 51
1.11 Electrical system diagram ........................................................................................................................53
Cables colour coding .................................................................................................................................53
Key to the wiring diagram components (XXF 250 version) .....................................................................54
Wiring, harnesses and electrical extensions legend (XXF 250 version) ..................................................54
Wiring diagram (XXF 250 version) .............................................................................................................55
Key to the wiring diagram components (XXF 450 version) .....................................................................56
Wiring, harnesses and electrical extensions legend (XXF 450 version) ..................................................56
Wiring diagram (XXF 450 version) .............................................................................................................57
Key to the wiring diagram components (XXF 250 / XEF 450 versions) ...................................................58
Wiring diagram (XXF 250 / XEF 450 versions) ...........................................................................................60
1.12 Lamps (for XEF 250 / XEF 450 versions only) ..........................................................................................62

INDEX
USE AND MAINTENANCE MANUAL
4-Strokes - Edition 00 / 2022
4
1.13 Fuses ..........................................................................................................................................................62
1.14 Recommended lubricants and liquids ...................................................................................................63
1.15 Maintenance intervals ..............................................................................................................................64
Periodic maintenance chart for the emission control system (for XEF 250 / XEF 450 versions only) ..64
General maintenance and lubrication chart (for XEF 250 / XEF 450 versions only) ..............................64
Maintenance intervals for competition use (XEF 250 / XEF 450 versions) .............................................66
Maintenance intervals (XXF 250 / XXF 450 versions) ...............................................................................69
2. Use of the vehicle ................................................................................................................................. 72
2.1 Pre-operation inspection and maintenance ............................................................................................72
2.2 Running in .................................................................................................................................................. 72
2.3 Refuelling ....................................................................................................................................................73
2.4 Starting the engine ....................................................................................................................................73
Starting a cold engine ................................................................................................................................ 73
Starting a warm engine .............................................................................................................................73
2.5 Stop the engine ..........................................................................................................................................74
2.6 Main components ......................................................................................................................................74
Engine stop switch(XEF 250 / XEF 450 versions) ......................................................................................74
Engine stop switch(XXF 250 / XXF 450 versions) ......................................................................................75
Clutch lever ................................................................................................................................................75
Shift pedal (XXF 250 / XEF 250 versions) ...................................................................................................75
Shift pedal (XXF 450 / XEF 450 versions) ...................................................................................................75
Throttle grip ...............................................................................................................................................76
Front brake lever ........................................................................................................................................76
Start button (XEF 250 / XEF 450 versions) ................................................................................................76
Start button (XXF 250 / XXF 450 versions) ................................................................................................76
Launch/traction control system (XXF 250 / XXF 450 versions) ................................................................ 77
Engine mapping selection switch (XXF 250 / XXF 450 versions) ............................................................. 77
Rear brake pedal ........................................................................................................................................77
Start knob (air valve) ..................................................................................................................................78
Sidestand (XEF 250 / XEF 450 versions) ....................................................................................................78
Locking device (XEF 250 / XEF 450 versions) ............................................................................................78
2.7 Dashboard (for XEF 250 / XEF 450 versions only) ....................................................................................79
Basic functions ...........................................................................................................................................79
Function, setting instructions ................................................................................................................... 79
Meter size ....................................................................................................................................................80
Select button function instruction ...........................................................................................................80
Adjust button function instruction ........................................................................................................... 80
The settings screen description ................................................................................................................ 81
Enter settings and function index menu .................................................................................................. 81
Circumference and sensing pointsetting ................................................................................................. 81
RPM pulse setting ....................................................................................................................................... 82
Funzioni non attive ....................................................................................................................................82
Backlight brightness setting ..................................................................................................................... 82
Oil maintenance mileage setting ..............................................................................................................83
Speed unit setting ......................................................................................................................................83
External ODO ..............................................................................................................................................83
Internal ODO ...............................................................................................................................................84

INDEX
USE AND MAINTENANCE MANUAL
4-Strokes - Edition 00 / 2022
5
Trouble shooting ........................................................................................................................................84
Dashboard setting values ..........................................................................................................................84
3. Adjustments .........................................................................................................................................85
3.1 Brakes .......................................................................................................................................................... 85
Front brake adjustment .............................................................................................................................85
Rear brake adjustment ..............................................................................................................................85
3.2 Clutch ..........................................................................................................................................................86
Adjusting the clutch lever position ...........................................................................................................86
Adjusting the clutch lever clearance ........................................................................................................86
3.3 Throttle control ..........................................................................................................................................87
Adjusting the throttle grip clearance ........................................................................................................87
3.4 Adjusting the engine idling speed ............................................................................................................ 87
3.5 Handlebar adjustment ..............................................................................................................................88
Handlebar installation and adjustment ...................................................................................................88
3.6 Rear-view mirrors(for XEF 250 / XEF 450 versions only) ..........................................................................89
Rear-view mirror adjustment ....................................................................................................................89
3.7 Fork adjustment .........................................................................................................................................90
Rebound damping adjustment (return) ...................................................................................................90
Compression damping adjustment .........................................................................................................90
Relieving the front fork internal pressure ................................................................................................ 91
3.8 Rear shock absorber adjustment .............................................................................................................92
Rebound damping adjustment (return) ...................................................................................................92
Compression damping adjustment (low speed) .....................................................................................92
Compression damping adjustment (high speed) ...................................................................................93
3.9 Setting the SAG ........................................................................................................................................... 93
Rear shock absorber sinking adjustment (SAG) ......................................................................................93
3.10 Chain tension ............................................................................................................................................95
Chain tension check ..................................................................................................................................95
Chain tension adjustment .........................................................................................................................95
3.11 Engine mappings (XXF 250 / XXF 450 versions) .......................................................................................96
3.12 Traction CONTROL mode (XXF 250 / XXF 450 versions) ..........................................................................96
TRACTION CONTROL level setting ............................................................................................................96
3.13 Launch CONTROL mode (XXF 250 / XXF 450 versions) ...........................................................................97
Activation of LAUNCH CONTROL ..............................................................................................................97
LAUNCH CONTROL operation ...................................................................................................................99
4. Maintenance ....................................................................................................................................... 101
4.1 Engine oil .................................................................................................................................................. 101
Engine oil level check(XXF 250 / XEF 250 versions) ............................................................................... 101
Engine oil level check(XXF 450 / XEF 450 versions) ............................................................................... 101
Engine oil change and engine oil filter replacement ............................................................................ 101
Engine oil filling (XXF 250 / XEF 250 versions) ........................................................................................ 103
Engine oil filling (XXF 450 / XEF 450 versions) ........................................................................................ 104
4.2 Coolant ..................................................................................................................................................... 105
Checking the coolant level ...................................................................................................................... 105
Coolant replacement ............................................................................................................................... 105
4.3 Air filter ..................................................................................................................................................... 106
4.4 Camshafts ................................................................................................................................................. 108

INDEX
USE AND MAINTENANCE MANUAL
4-Strokes - Edition 00 / 2022
6
Removal (XXF 250 / XEF250 versions) ..................................................................................................... 108
Installation (XXF 250 / XEF250 versions) ................................................................................................. 109
Removal (XXF 450 / XEF450 versions) ..................................................................................................... 111
Installation (XXF 450 / XEF450 versions) ................................................................................................. 113
4.5 Valve clearance ......................................................................................................................................... 116
Check ........................................................................................................................................................ 116
Adjustment ............................................................................................................................................... 116
4.6 Cylinder head ........................................................................................................................................... 118
Removal (XXF 250 / XEF 250 versions) .................................................................................................... 118
Check (XXF 250 / XEF 250 versions) ........................................................................................................ 118
Installation (XXF 250 / XEF 250 versions) ................................................................................................ 118
Removal (XXF 450 / XEF 450 versions) .................................................................................................... 120
Check (XXF 450 / XEF 450 versions) ........................................................................................................ 120
Installation (XXF 450 / XEF 450 versions) ................................................................................................ 120
4.7 Cylinder and piston .................................................................................................................................. 122
Removal .................................................................................................................................................... 122
Cylinder check .......................................................................................................................................... 122
Piston check ............................................................................................................................................. 123
Installation ............................................................................................................................................... 124
4.8 Soundproofing ......................................................................................................................................... 125
4.9 Clutch ........................................................................................................................................................ 125
Clutch removal ......................................................................................................................................... 125
Check the clutch elements ...................................................................................................................... 127
Clutch installation .................................................................................................................................... 128
4.10 Steering play control and adjustment .................................................................................................. 132
Steering play control ............................................................................................................................... 132
Steering play adjustment ........................................................................................................................ 132
4.11 Fork .......................................................................................................................................................... 133
4.12 Shock absorber ...................................................................................................................................... 133
4.13 Wheels ..................................................................................................................................................... 133
Spokes check and tightening .................................................................................................................. 133
Wheel check ............................................................................................................................................. 134
4.14 Brake pads .............................................................................................................................................. 134
Replace the front brake pads .................................................................................................................. 134
Replace the rear brake pads .................................................................................................................... 135
4.15 Tyres ........................................................................................................................................................ 137
4.16 Chain, crown and sprocket .................................................................................................................... 137
Chain check .............................................................................................................................................. 137
Pinion and crown check .......................................................................................................................... 137
4.17 Cleaning and vehicle storage ................................................................................................................ 138
4.18 Long time vehicle inactivity .................................................................................................................. 138

INDEX
USE AND MAINTENANCE MANUAL
4-Strokes - Edition 00 / 2022
7
5. Warranty and service ......................................................................................................................... 140
Warranty .......................................................................................................................................................... 140
Warranty period ....................................................................................................................................... 140
Warranty conditions ................................................................................................................................ 140
Exclusions from the warranty ................................................................................................................. 141
Additional warranty provisions .............................................................................................................. 141
Request for intervention under warranty .............................................................................................. 141
Warnings for maintenance and care ...................................................................................................... 141
Warranty data .................................................................................................................................................. 142
Service ............................................................................................................................................................. 143

13 Motore1. General information1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
8
1.1 WARNINGS
Carbon monoxide
The exhaust fumes contain carbon monoxide, a poisonous gas that can cause death. Therefore, for certain operations,
make sure you are in an open space, or in a suitable and well-ventilated room, never in enclosed spaces. If operating in
enclosed spaces, use an evacuation system for the exhaust fumes.
Fuel
The fuel used is extremely flammable and can become explosive under certain conditions. Refuelling and maintenance
operations must be carried out in a ventilated area and with the vehicle switched off. Do not smoke during refuelling and
near fuel vapours; avoid contact with open flames, sparks and any other source that could cause ignition or explosion.
Do not disperse in the environment and keep away from children.
Hot components
The engine and certain components become very hot and remain hot for a while even when the engine is off. Before
carrying out any operation near the engine or exhaust system, wear insulating gloves or wait for their cooling.
Used engine and gearbox oil
Used engine and gearbox oil is harmful to health, whether it is inhaled or swallowed. It is also irritating and can cause
serious consequences if it comes into contact with the skin.
Spreading and dispersion into the environment is prohibited.
If swallowed, do not induce vomiting, but go urgently to a first aid centre, indicating the cause and how the accident
occurred.
In case of contact with the skin, immediately wash the affected part with soap and water, repeating the operation until
the affected part is free from residues.
In case of contact with eyes and ears, immediately rinse the affected parts with plenty of water and urgently go to a first
aid center, indicating the cause and how the accident occurred.
In case of contact with clothing, undress and wash thoroughly with soap and water. Change the dirty cloths which must
be specifically washes as soon as possible.
Always use gloves suitable to protect your hands during the maintenance operations.
Keep out of the reach of children.
Used engine and gearbox oil must be collected in a sealed container, and delivered to the nearest service station or at a
waste oil collection centre where you will find personnel authorized to dispose of it.
Brakes
Brake fluid may damage the vehicle painted, plastic or rubber surfaces. Protect these components with a clean rag when
performing certain operations.
Always wear protective glasses and in case of accidental contact of the brake fluid with eyes, rinse immediately with
plenty of clean, fresh water and consult a doctor immediately. Keep out of the reach of children.
Clean the brake pads in a ventilated environment, directing the compressed air jet so as not to inhale the dust produced
by the wear of the friction material. Although the latter does not contain asbestos, inhaling dust is however harmful.
Electrolyte and hydrogen gas from the battery
The electrolyte of the battery is toxic and caustic. In contact with skin it can cause burns, as it contains sulphuric acid.
Wear gloves and protective clothing.
If the electrolyte liquid comes into contact with the skin, wash it thoroughly with fresh water.
Protect your eyes, as battery fluid can cause blindness. If it comes into contact with the eyes, wash thoroughly with
water for fifteen minutes and promptly contact an eye specialist.

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
9
1
The battery emits explosive gases, it is advisable to keep away flames, sparks and any other source of heat. Provide
adequate ventilation when servicing or recharging the battery.
Keep out of the reach of children.
The battery fluid is corrosive. Do not pour it or spread it, especially on plastic parts.
Provide for regular disposal.
Coolant
Under certain conditions, the ethylene glycol present in the engine coolant is combustible and its flame is not visible. If
ethylene glycol is ignited, its flame is not visible but it is able to cause serious burns.
Avoid pouring engine coolant to the exhaust system or on engine parts. These parts may be hot enough to ignite the
liquid which then burns without visible flames. Coolant (ethylene glycol) can cause skin irritation and is poisonous if
swallowed. Keep out of the reach of children. Do not remove the radiator cap when the engine is still hot. Coolant is
under pressure and may cause burns.
Keep hands and clothes away from the cooling fan as it starts automatically.
Precautions and general warnings
The clothing of the operator performing the repair operations must be adequate to avoid the risk of injury when working
on moving parts (for example, too wide clothes that can get caught).
Do not wear personal items (e.g. rings, wristwatches, etc.) while performing repairs on the vehicle, and in particular on
the electrical system.
Keep the work area tidy, to avoid that elements left on the ground interfere with the repair operations.
Clean the floors of the working areas from oil, grease or other residual fluids, to avoid slipping.
Perform compression or decompression operations on the springs, using only suitable tools to prevent the operations
from causing damage to the operator.
Avoid inhalation of vapours from cleaning fluids: they can be highly toxic. Make sure the work area is properly ventilated.
Use suitable cleaning products for each operation, making sure that they are approved.
Wear eye protection when using electrical tools such as drills, grinders or milling machines.

13 Motore1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
10
1.2 SYMBOLS USED IN THE MANUAL
Within this manual there will be technical warnings and annotations preceded by the following symbols according to the reference
topic:
Warning regarding the procedure described and the specific safety rules: indicates procedures that must be followed to
prevent damage to the vehicle or possible injuries to vehicle repairers.
Information note on the procedure described and on the characteristics of the vehicle: it provides useful information to
make the procedure easier and clearer.
Tightening torque: note showing one or more tightening torques values referred to the procedure described.
Measurement data: note showing the values of one or more measurements to be complied with or verified for the
procedure described.
Equipment: note that informs the user of the need to use particular tools for the procedure described.
Consumable: note that illustrates the names, types and/or quantities of consumables (such as oil, fuel, sealants,
additives, etc.) to be used for the procedure described.
All left or right indications refer to the direction of travel of the motorcycle.
This manual contains images illustrating some disassembling sequences, using the following symbols to identify the characteristics
of the type of intervention.
Apply and/or lubricate using engine oil.
Apply and/or lubricate using gear oil.
Apply and/or lubricate using molybdenum disulphide oil.
Apply and/or lubricate using brake fluid.
Apply a product that is not specified or specified separately.
Apply wheel bearing grease.
Apply lithium soap based grease.
Apply molybdenum disulphide grease.
Apply and/or lubricate using silicone grease.
Apply a threadlocker (LOCTITE®).
Replace with a new component.

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
11
1
1.3 BEHAVIOUR AND DRIVING
Some safety tips are given below to avoid damage to people and/or things and to use your vehicle with an easier and safer drive.
Vehicle use
To use the vehicle it is necessary to meet all the law requirements.
It is advisable, in order to acquire a good knowledge of the vehicle, to use the vehicle in areas without traffic or unpopulated stretches
of road.
It is advisable to always respect the highway code while driving, to avoid sudden or dangerous manoeuvres keeping both hands on
the handlebar and always keeping your feet on the appropriate footrests. Pay close attention while riding.
Do not ride the vehicle while drunk, under the influence of drugs, after taking certain medicines or in a state of physical
fatigue and drowsiness. Failure to comply with these rules is considered extremely dangerous and could cause serious
damage to property and/or people.
Evaluate and keep in consideration the conditions of the road surface, visibility and weather. In a situation not suitable for safe
driving, reduce the speed and drive carefully.
The braking effect in wet roads without ever having applied the brakes is initially less; under these conditions it is advised to
periodically operate the brakes.
In case the vehicle is used on roads dirty with sand, mud, snow mixed with salt, we recommend checking and if necessary cleaning
the brake discs with special non-aggressive detergents, so as to prevent the formation of abrasive agglomerates inside the holes and
an early wear of the brake pads.
The getting on and off from the vehicle must be in complete freedom of movement and without impediments.
Go up and down only from the left side of the vehicle and with the kickstand down to prevent unbalancing or loss of balance, causing
falls or overturns.
The rider is always the first to go on and the last to go down as he/she has to govern the stability of the vehicle.
Getting on
The passenger must make the movements to get on with the utmost caution, avoiding to unbalance the rider and the vehicle.
Place your feet on the ground and hold the vehicle in running position.
Getting off
Stop the vehicle in an area suitable for stopping or parking, ensuring that the ground is stable and free of obstacles. Fully extend the
kickstand using the left foot.
Tilt the vehicle making the kickstand touch the ground. Get off the vehicle and turn the handlebar completely to the left.
Make sure that the vehicle is stationary and stable.
Do not lift the vehicle grasping the license plate holder frame, in order to avoid damage.Qui di seguito vengono elencati
alcuni consigli sulla sicurezza al fine di evitare danni a persone e/o cose e per utilizzare il proprio veicolo con una guida
più tranquilla e sicura.

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
12
C
B
A
Fantic Motor vehicles are equipped with frame and engine
identification numbers.
These numbers that identify the motorcycle model
must be mentioned for the request for spare parts.
1.4 FRAME NUMBER
The frame number “A” is punched on the steering tube on
the right side.
1.5 ENGINE NUMBER
XXF 250 / XEF 250 versions
The engine number “B” is punched on the left side of the
engine crankcase.
XXF 450 / XEF 450 versions
The engine number “C” is punched on the right-hand engine
casing on the inside. It is visible when looking at the inside of
the vehicle from the left side.

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
13
1
2 1
5
43
6
1.6 LOCATION OF IMPORTANT LABELS
1. Pressurised gas hazard label
2. Usable petrol quality label (XEF 250 / XEF 450 ONLY)
3. Chassis number punching
4. Vehicle data plate
5. “Choke” symbol (XEF 250 / XEF 450 ONLY)
6. Tyre pressure label (XEF 250 / XEF 450 ONLY)

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
14
5
90/90-21
80/100-21
140/80-18
130/90-19
ON-ROAD USE OFF-ROAD USE
PRESSURE [kPa]
AXLE SIZE
200
200
220
220
100
100
100
100
120/90-18 220 100
6
34
1
E5 E10
PETROL FUEL TYPE
2

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
15
1
2
1 11 143 4 6
12 10 9 8 13 5 7
1.7 VEHICLE COMPONENT LOCATION
Handlebar components (XEF 250 version)
Ref. Component
1 High beam flashing button
2 Clutch lever
3 “SELECT” button
4 “ADJUST” button
5 Engine stop switch
6 Front brake lever
7 Throttle grip
8 Radiator cap
9 Fuel tank cap
10 Speedlight switch
11 Horn button
12 Low beam/high beam light switch
13 Starter switch
14 Dashboard

13 Motore1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
16
20
21 22 23
24
27
25
18 191726
15
16
Right and left side components (XEF 250 version)
Ref. Component
15 Headlight
16 Radiator
17 Rear brake pedal
18 Inspection window for oil level check
19 Coolant drain bolt
20 Front fork
21 Fuel tank
Ref. Component
22 Air filter
23 Taillight
24 Shift pedal
25 Drive chain
26 Oil filler cap
27 Starter knob

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
17
1
1 3 4
2 8 5 7 6
Handlebar components (XXF 250 version)
Ref. Component
1 Clutch lever
2 Engine stop switch
3 Front brake lever
4 Throttle grip
5 Radiator cap
6 Starter switch
7 “Launch / traction control system” mode control button
8 Engine mapping selector

13 Motore1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
18
21
19 20
17 18
16
1214 1315
9 10
11
Right and left side components (XXF 250 version)
Ref. Component
9 Fuel tank cap
10 “Launch / traction control system” display
11 Radiator
12 Rear brake pedal
13 Coolant drain bolt
14 Oil filler cap
15 Inspection window for oil level check
Ref. Component
16 Front fork
17 Fuel tank
18 Air filter
19 Shift pedal
20 Drive chain
21 Starter knob

1. General information
USE AND MAINTENANCE MANUAL CHAPTER 1
GENERAL INFORMATION4-Strokes - Edition 00 / 2022
19
1
2
1 11 143 4 6
12 10 9 8 13 5 7
Handlebar components (XEF 450 version)
Ref. Component
1 High beam flashing button
2 Clutch lever
3 “SELECT” button
4 “ADJUST” button
5 Engine stop switch
6 Front brake lever
7 Throttle grip
8 Radiator cap
9 Fuel tank cap
10 Speedlight switch
11 Horn button
12 Low beam/high beam light switch
13 Starter switch
14 Dashboard