FarmChem GRIZZLY User manual

Electronic Flow MeterElectronic Flow Meter
operational guideoperational guide

FarmChem | 800.247.1854
Description
The Grizzly Replacement Electronic Meter Kit is a posive displacement, nutat-
ing disk uid meter that boasts an industry leading 3.5” full color LCD backlit
display. The meter is menu driven for ease of use and provides intuive instruc-
ons for calibraon and other meter funcons.
Large full color
backlit display
Buons correspond with
menu displayed on LCD
Menu driven for
ease of use
Overview

FarmChemShop.FarmChem.com |
Operation
Connect sucon and discharge lines to the meter, prime your system and per-
form a calibraon on the uid to be pumped. Once complete, you are ready to
go. The meter will automacally wake up when uid starts owing to give you
accurate measurement of your product within +- 0.5%.
Technical Specs
Flow Range 2 to 30 GPM (depending on conguraon)
Max Pressure 40 PSI
Power Source Two CR 123 Baeries
Accuracy +/- 0.5%
Auto Shut-O 30 seconds
Auto Wake-Up With ow
Display Color Backlit LCD
Material Of Construction
Electronic Housing Polycarbonate with over-molded santoprene
Meter Chamber PPS, Stainless Steel
Orings Viton or EPDM
Fluid Housing Nylon or Polypropylene
Hardware Stainless Steel
Features
• Industry leading 3.5” full color LCD backlit display
• Simple, one touch operaon
• All-in-One calibraon procedure eliminates need for mulple calibraon
modes
• Menu driven for ease of use

FarmChem | 800.247.1854
Assembly
Step 1: Remove the eight outer screws of the me-
ter you’re replacing, then remove the interface.
Don’t remove any screws on the inside. Any silica
packets inside can remain inside.
Step 2: Remove any moisture and dirt from
meter, and put the gasket provided in place.
Step 3: Place the Grizzly on the meter. It can
face any direcon you need it to.
Step 4: Use the eight screws provided to ghten
the Grizzly in place. Torque screws to 18-20 in/lbs
WARNING: OVER TORQUEING MAY DAMAGE
HOUSING.
Step 5: Installaon is complete.

FarmChemShop.FarmChem.com |
Calibration Procedure
• Before performing calibraon, purge all air from pump and meter.
• Meter must be calibrated on the uid being pumped to be accurate.
Step 1: Select the MENU buon Step 2: Highlight Calibraon and press SELECT
Step 3: Highlight New Calibraon and press
SELECT
Step 4: Highlight UNITS and press SELECT to change
to gallons, quarts, liters, pints or no units. Highlight
NEXT and press SELECT to connue.
Step 5: Place hose in a calibraon container and
catch preset amount or highlight VOLUME +- to
change to a dierent amount. Highlight SAVE
and press SELECT to complete calibraon.
Calibraon procedure
should be done daily
and upon any signicant
change in temperature or
product change.
!

FarmChem | 800.247.1854
This feature allows you to adjust calibraon if you do not collect the exact
amount when checking your calibraon.
Step 1: Select the MENU buon Step 2: Highlight Calibraon and press SELECT
Step 3: Highlight ADJUST CALIBRATION and
press SELECT
Step 4: If you catch more than your target
amount, then adjust your counts lower by select-
ing COUNT-. Increase the counts if you catch less
than your target. Highight SAVE and press SELECT
to nish your cal adjustment.
Calibration Adjustment

FarmChemShop.FarmChem.com |
Additional Features
This mode allows you to adjust the amount of me it takes the meter to go to
sleep aer no acvity, reset the Daily/Trip total and view the meter lifeme
amount dispensed.
Step 1: Select MENU to access
other features. Counter A and
B can be reset by pressing
RESET A or RESET B from the
main screen shown above.
Step 2: Use < and > arrows to
select + or - to adjust sleep
me. Highlight NEXT to save
and move to the next screen.
Step 3: Press arrow key to
highlight RESET DAILY TOTAL
to reset to 0. Press SELECT to
nish and move to the screen.
Step 4: This screen allows you
to view the lifeme meter to-
tal. Select BACK twice to return
to the operang screen.
Adjusting Screen Brightness
Step 1: Current brightness is
shown in red to the lower le
of the counter. Press BRIGHT
to move to the next screen.
Step 2: Press BRIGHT to cycle
between 40%, 60%, 80% and
100% brightness. Hit SAVE to
save brightness seng.
Step 3: Screen should return
home with your new seng.
Note: The brighter the screen,
the faster it drains the baery.

Product Warranty
FarmChem Corporaon (the Company) warrants that the Equipment will be
free of defects in material and workmanship for a period of two (2) years from
the date of purchase.
The Purchaser shall promptly report any failure to conform to this warranty, in
wring to the Company within said period, whereupon, the Company shall, at
its opon, repair the Equipment or furnish a replacement part F.O.B. point of
shipment, provided the Purchaser has stored, installed, maintained and oper-
ated the Equipment in accordance with good industry pracces. The Company
shall not be liable for any repairs, replacements, or adjustments to Equipment
or any cost of labor performed by the Purchaser or others. The eects of corro-
sion, erosion and normal wear and tear are specically excluded. The Company
makes no other warranty or representaon whatsoever, expressed or implied,
except that of tle, and all implied warranes of merchantability and tness for
a parcular purpose, are hereby disclaimed.
800.247.1854 • farmchem.com