Fastora Fastora NAS-208 User manual

2U Powerful and
Cost-effective
Storage Device
The FASTORA NAS-208 is a NAS
(Network Attached Storage)
device,which provides a
cost-effective solution that
minimizes the cost of extra
HDD space.The 2U system
features 8 HDD drive bays and
RAID 0,1,5,and 5 with hot
spare that helps prevent
precious data from being lost,
and offers a quick and efficient
backup solution.In addition,
administrators can monitor
hardware status via the LCM
(Liquid Crystal Monitor)
display,and take any needed
action immediately if problems
do occur.The FASTORA NAS-208
provides simple,yet complex
reliability,scalability,flexibility,
and high performance in the
space of 2U.
NAS –208
.

Product Highlights and
Benefits •Reliability
– 8 X ATA-133 Hot-swappable HDD bays
– Supports RAID 0,1,5,and 5 with Hot-Spare
– Redundant Hot-swappable power supplies
– N-Way OS Mirroring secures data no mater if any HDD fails
– Hardware Monitoring,Auto-notifications,and Logging
– Dual 10/100 Mbps Ethernet with fail-over capability
– UPS (Uninterruptible Power Supply) support through serial port & SNMPTrap
•Performance
– Dual 10/100 Mbp Ethernet with trunking capability
– Gigabit Ethernet (auto-sensing) Support
– RAID 5 Device Layer Cache Support with 20% performance enhancement
•Scalability
– 2U Rack-mount design
–Volume concatenation support(*)
– Network Resilience-Multi-subnets support
(*)Available with FASTORA Filer software for Enterprise Businesses
•Cost-Saving
– Hot-Swappable IDE HDD Interface,costs at least 30% lower than SCSI
– Affordable initial setup cost and competitive incremental cost
•Flexibility&Interoperability
– Mulit-Protocol system supports on Microsoft,Apple,UNIX/LINUX,and Novell networks
– Design for integration into Microsoft NT4.0/2000 domain and NIS domain
•Security
– FASTORA Filer Backup to secure the data of whole NAS
– FASTORA Data Replicator to secure the data of client
•Simplicity
– Friendly Browser-Based Graphic User Interface (GUI)
– Powerful and easy-to-use FASTORA Filer software for management
– LCM Display for easy management
Form Factor
Capacity
Power Supply
Hard Drive
Rear Panel Connector
Front Panel Display
Front Panel LED
Processor
Main Memory
IDE Interface
Serial Port
Ethernet
Compact-FlashTM
Hardware Monitoring
Dimensions
Weight
Operation environment
Storage environment
2U rack-mount/stacked-up on desktop design
From 0 to 1.28TB and beyond,depending on hard disk drive capacity
Redundant 300W ATX power supplies
8 Hot-Swappable Enhance IDE HDD driver bays
2 x 10/100 Base-T Ethernet LAN port
1 x Gigabit Ethernet LAN port
1 x COM port
2 x 16 characters LCM support message display
8 x LEDs for HDDs
2 x LEDs for LANs
1 x LED for System
1 x LED for Alarm
1 x push-button for system reset
1 x push-button for power on/off
Intel Pentium III CPU Architecture
One PC100/133 SDRAM DIMM up to 512MB
Four onboard IDE controllers to support eight bus mastering ATA
66/100/133 Enhance IDE channels
One UART
Two 10/100 Base-T Ethernet and One Gigabit Ethernet Supporting Fail-over
andTrunking
One IDE interface CompactFlashTM socket for embedded use
Detection for six Fans,and for the CPU thermal temperature monitoring
482.6mm (19")(W) x 89mm (3.5")(H) x500mm (19.7")
Approx.12 kg without hard drive
Air temperature:10° C –35°C
Humidity:8% –90%
Air temperature:-20° C –65°C
Humidity:8% –90%
Hardware Specifications
Ordering Information Model Number
NAS-208:Dual 300W ATX power supply / PIII 1.2GHz/ 256MB DIMM/ Gigabit
NAS –208