Sony PetaSite DMS-B150L User manual

INSTALLATION MANUAL
1st Edition (Revised 3)
DIGITAL MASS STORAGE SYSTEM
DMS-B150L
DMS-B210S
DMS-B80L
DMS-B110S
DMS-EX150L
DMS-EX210S
EXTENSION CABLE KIT
DMSA-CBL1
EXTENSION BELT KIT
DMSA-BLT2/BLT6
TERMINAL SERVER
DMSA-TS08/TS16
TERMINAL SERVER KIT
DMSA-TS08K
TERMINAL SERVER CABLE
DMSA-CTS/CTL
ETHERNET HUB
DMSA-EH16
AC ADAPTER
DMSA-EHAC/EHACK
ETHERNET CABLE
DMSA-CES/CEL
POWER CORD
DMSA-CPJ/CPE
ATTACHMENT KIT
DMSA-AT80
SCSI BUS EXPANDER KIT
DMSA-SBE1
AC POWER CABLE KIT
DMSA-CBJ80/CBJ15/CBJEX

DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
!WARNING
This manual is intended for qualified service personnel only.
To reduce the risk of electric shock, fire or injury, do not perform any servicing other than that
contained in the operating instructions unless you are qualified to do so. Refer all servicing to
qualified service personnel.
!WARNUNG
Die Anleitung ist nur für qualifiziertes Fachpersonal bestimmt.
Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal ausgeführt werden. Um die
Gefahr eines elektrischen Schlages, Feuergefahr und Verletzungen zu vermeiden, sind bei
Wartungsarbeiten strikt die Angaben in der Anleitung zu befolgen. Andere als die angegeben
Wartungsarbeiten dürfen nur von Personen ausgeführt werden, die eine spezielle Befähigung
dazu besitzen.
!AVERTISSEMENT
Ce manual est destiné uniquement aux personnes compétentes en charge de l’entretien. Afin
de réduire les risques de décharge électrique, d’incendie ou de blessure n’effectuer que les
réparations indiquées dans le mode d’emploi à moins d’être qualifié pour en effectuer d’autres.
Pour toute réparation faire appel à une personne compétente uniquement.
DMSA-CBL1 _
DMSA-BLT2 _
DMSA-BLT6 _
DMSA-TS08 (SY) Serial No. 10001 and Higher
DMSA-TS16 (SY) Serial No. 10001 and Higher
DMSA-TS08K (SY) Serial No. 10001 and Higher
DMSA-CTS _
DMSA-CTL _
DMSA-EH16 (SY) Serial No. 10001 and Higher
DMSA-EHAC (J) _
DMSA-EHAC (UC) _
DMSA-EHAC (CE) _
DMSA-EHAC (AU) _
DMSA-EHACK (CE) _
DMSA-CES _
DMSA-CEL _
DMSA-CPJ (J) _
DMSA-CPE (UC) _
DMSA-AT80 _
DMSA-SBE1 (J) Serial No. 10001 and Higher
DMSA-CBJ80 (J) _
DMSA-CBJ15 (J) _
DMSA-CBJEX (J) _

1
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Table of Contents
Manual Structure
Purpose of this manual .............................................................................................. 3
Related manuals ......................................................................................................... 3
Contents ..................................................................................................................... 3
Trademarks ................................................................................................................ 4
1. Overview
2. Unpacking
2-1. Unpacking the Console ............................................................................... 2-1
2-1-1. Basic Console (DMS-B150L/B210S) and Accessories ............. 2-1
2-1-2. Basic Console (DMS-B80L/B110S) and Accessories ............... 2-3
2-1-3. Extension Console (DMS-EX150L/EX210S)
and Accessories .......................................................................... 2-4
2-2. DMSA-AT80 and Accessory List ............................................................... 2-6
2-3. DMSA-EH16 and Accessory List ............................................................... 2-7
2-4. DMSA-SBE1 and Accessory List ............................................................... 2-8
2-5. DMSA-TS08/TS16/TS08K and Accessory List ......................................... 2-9
3. Installation Environment and Machine Mass
3-1. Installation Environment ............................................................................. 3-1
3-2. Mass ............................................................................................................ 3-1
3-3. Installation Space ........................................................................................ 3-2
4. Power Supply
4-1. AC Power for DMS-B150L/B210S/B80L/B110S ...................................... 4-1
4-1-1. Power Cord ................................................................................. 4-1
4-2. AC Power for DMSA-TS08/TS16 .............................................................. 4-3
4-2-1. Power Cord ................................................................................. 4-3
4-3. AC Power for DMSA-SBE1 ....................................................................... 4-3
4-3-1. Power Cord ................................................................................. 4-3
4-4. AC Adapter for DMSA-EH16 .................................................................... 4-3

2DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
5. About Installation Work
5-1. Notes during Installation ............................................................................. 5-1
5-2. Tools ............................................................................................................ 5-2
6. Installation Procedure
6-1. Installation Flow.......................................................................................... 6-1
6-2. Removal and Installation of the Cabinets ................................................... 6-2
6-3. Removal of the Shipping Metal Fixtures .................................................... 6-6
6-4. Installation of the Basic Console............................................................... 6-10
6-5. Connecting Extension Consoles ................................................................ 6-12
6-6. Installation of DMSA-CBL1 ..................................................................... 6-28
6-7. Prevention of Falling ................................................................................. 6-37
6-8. Voltage Selector Setting and Notes........................................................... 6-42
6-9. Installation of the Tape Drive ................................................................... 6-43
6-9-1. Basic Console ........................................................................... 6-43
6-9-2. Extension Console .................................................................... 6-47
6-9-3. Routing the Cables to Be Connected to the Drives .................. 6-54
6-10. Setting the Switches .................................................................................. 6-55
6-11. Installing the Package Supporting Equipment .......................................... 6-57
6-11-1. Installation of the DMSA-TS08/TS16 ..................................... 6-57
6-11-2. Installation of the DMSA-EH16/EHAC/EHACK ................... 6-60
6-11-3. Installation of the DMSA-CBJ80/CBJ15/CBJEX ................... 6-62
6-11-4. Installation of the DMSA-AT80 .............................................. 6-68
6-11-5. Installation of the DMS-PCU1 ................................................. 6-70
6-11-6. Installation of the DMS-FSW24/28 ......................................... 6-72
6-11-7. Installation of the DMSA-SBE1 .............................................. 6-73
6-12. Wiring Inside Console............................................................................... 6-74
7. Connecting the Cables
7-1. Connecting the Power Cable and the UPS .................................................. 7-1
7-1-1. Connecting the Power Cable ...................................................... 7-1
7-1-2. Connecting the UPS Cables and Setting the Switches ............... 7-1
7-2. Signal Input/Output ..................................................................................... 7-2
7-3. Connecting Connectors and Cable .............................................................. 7-4
8. Operation Check

3
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Manual Structure
Purpose of this manual
This manual is the installation manual of PetaSite Digital Mass Storage System
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S, DMSA-CBL1/BLT2/BLT6.
This manual is intended for use by trained system and service engineers, and
describes the information when installing.
Related manuals
The following manuals are prepared for DMS-B150L/B210S/B80L/B110S/EX150L/
EX210S.
.Operation Manual (Supplied with this system)
This manual describes the overview of the system and the specifications.
.Maintenance Manual (Available on request)
This manual describes the information for periodic maintenance, and the service
based on the board replacement.
Contents
This manual is organized by following sections.
Section 1 Overview
This section describes the overview of the PetaSite.
Section 2 Unpacking
This section describes the supplied accessories for the basic console.
Section 3 Installation Environment and Machine Mass
This section describes the installation environment, the mass, and the installation
space.
Section 4 Power Supply
This section describes the power supply voltage.
Section 5 About Installation Work
This section describes the precautions when installing, and the fixtures.
Section 6 Installation Procedure
This section describes how to remove/install the doors and panels, how to install the
basic console, how to remove the shipping bracket, install the tape drive, etc.
Section 7 Connecting the Cables
This section describes the connection of the power cable with UPS, the input and
output signals of connectors and other connectors and cables.
Section 8 Operation Check
This section describes the operation check after installation is complete.

4DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Trademarks
Registered trademarks used in this manual are as follows.
.WindowsNT is a registered trademark of Microsoft Corporation.
.Solaris is a trademark of Sun Microsystems Inc..

1-1
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Section 1
Overview
The PetaSite DMS-B150L/B210S/B80L/B110S/EX150L/EX210S controls the many cassette tapes that
are used in the DTF digital tape streamer so that huge volumes of data can be stored, searched, recorded
and played back. It is used as the key equipment.
The PetaApp system realizes the large capacity data processing and backup at a high speed. The required
software and hardware are integrated in the single system that enables to construct a highly reliable
backup system. (In this document, the PetaSite 150/80 series that is set in the PetaApp system is called
the Package-supporting model. At the same time, the other equipment than the PetaSite 150/80 series that
is used in the PetaApp system is called the Package-supporting equipment.)
PetaSite 150/80 series of products consists of two models : the model for L cassettes which focus on large
capacity, and the model for S cassettes which offer superior performance in terms of high-speed access.
The optimum system can be built to suit the application, such as using the model for L cassettes when the
system needs a large capacity for data backup, or the model for S cassettes when the system needs high-
speed access such as for HSM or archiving.
Thanks to the high-speed access mechanism, the cassette transfer time of five seconds with 360 cassette
changes per hour (estimated averages) and accesses per hour of about two to six times faster than that of
the conventional model are realized. As a result, convenient data access is possible; the average data
access start time is thirty seconds or shorter when S cassettes are used, and one minute or shorter when L
cassettes are used. (Both times are the average when DTF-2 is mounted.)
DMS-B80L/B110S (PetaSite80 series)
The PetaSite80 series can store up to 16.2 terabytes of data in the compact body (when L cassettes are
used and DTF-2 is mounted). In addition, up to four tape drives can be mounted.
DMS-B150L/B210S/EX150L/EX210S (PetaSite150 series)
The PetaSite150 series consists of the DMS-B150L/B210S basic console and DMS-EX150L/EX210S
extension consoles. Up to one or two extension consoles can be connected to the basic console, when the
extension belt kit DMSA-BLT2 is used.
When the extension belt kit DMSA-BLT6 and the extension cable kit DMSA-CBL1 are used, the exten-
sion consoles can be connected in the range of 3 to 6. When the extension consoles in the range of 3 to 6
are connected, the cassette transport time becomes 7 second (average) and the number of cassette change
becomes 300 cassettes (average) per hour.
In addition, the BetaCam series
*
of professional video cassette recorders that are used in worldwide broad-
cast stations and production companies can be mounted in the extension console, and various applications
such as picture archiving can be supported by using cassette tapes together with the DTF streamer.
*: BetaCam series is the VTR of 5U having SDI output function
DMSA-TS08/DMSA-TS16/DMSA-TS08K TERMINAL SERVER
This is the terminal server that can perform the RS-232C communication by integrating them into the
TCP/IP communication.
DMSA-EH16 ETHERNET HUB
This is the Ethernet switching hub.
DMSA-AT80 ATTACHMENT KIT
This is the attachment kit to install the DMS-PCU1 and the DMS-FSW24/FSW28 into the DMS-B80L.
DMSA-SBE1 SCSI BUS EXPANDER KIT
This kit enables to separate the SCSI equipment (between the SCSI tape streamer and host computer)
with the disable switch by electrically. Therefore, removal of the SCSI equipment from the SCSI bus
becomes easy in the event of maintenance, etc.
DMSA-CBJ80/CBJ15/CBJEX AC POWER CABLE KIT
This is the kit to connect the power cablings inside the PetaSite80/150 series.

2-1
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Section 2
Unpacking
2-1. Unpacking the Console
.A forklift is required to unpack the console.
.The console has casters to facilitate movement.
.Take care when handling the console.
Damage and transformation of the X rail that has been attached to the floor and ceiling inside the
console could cause a failure or malfunction.
.A cushioning material for transportation is attached to the I/O magazine. Be sure to remove it before use.
.Cabinets are not attached to the right and left of the extension console. When moving the console, be
careful not to damage the internal parts.
2-1-1. Basic Console (DMS-B150L/B210S) and Accessories
Outside view
Types and quantity of standard accessories
.Operation Manual : 1
.Plug holder : 2
.Tie mount : 30
.Repeat tie : 8
.Tie band : 40
.Screw (PWH4 x8) : 20
DMS-B150L/B210S
Spacer
Standard accessory
Panel (front)
Bottom table
Panel (rear)
Top cap
Band
Metal fasteners
Metal fasteners
Accessory box
Accessory box
Forks of forklift
Forklift labels
Supplied accessory
of the package
supporting equipment
Supplied accessories
of the package
supporting equipment
Outside dimensions when packed
in package
1300 (W) x2135 (H) x1545 (D)

2-2 DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
2-1. Unpacking the Console
Unpacking Procedure
1. Cut the four bands.
2. Remove the top cap.
3. Remove the six metal fasteners and remove the panel (front) and panel (rear).
4. Prepare the spacer and standard accessory and remove the plastic bag from the console.
5. Align the forks of the forklift with the forklift labels on the rear of the console, hold up the bottom of
the console and move down from the bottom table.
6. Open the drive stage panel while referring to Section 6-5.
7. Pull out the bottom stage and remove the accessory box.

2-3
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
2-1-2. Basic Console (DMS-B80L/B110S) and Accessories
Outside view
Types and quantity of standard accessories
.Operation Manual : 1
.Plug holder : 2
.Tie mount : 20
.Repeat tie : 6
.Tie band : 30
.Screw (PWH4 x8) : 20
Unpacking Procedure
1. Cut the four bands.
2. Remove the top cap.
3. Remove the six metal fasteners and remove the panel (front) and panel (rear).
4. Prepare the spacer and standard accessory and remove the plastic bag from the console.
5. Align the forks of the forklift with the forklift labels on the rear of the console, hold up the bottom of
the console and move down from the bottom table.
6. Open the drive stage panel while referring to Section 6-5.
7. Pull out the bottom stage and remove the accessory box.
2-1. Unpacking the Console
Forks of forklift
Forklift labels
DMS-B80L/B110S
Standard
accessory
Spacer
Panel (front)
Bottom table
Panel (rear)
Top cap
Band
Metal fasteners
Metal fasteners
Accessory box
Accessory box
Supplied accessories
of the package
supporting equipment
Supplied accessory
of the package
supporting equipment
Outside dimensions when packed
in package
1280 (W) x1734 (H) x1295 (D)

2-4 DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
2-1-3. Extension Console (DMS-EX150L/EX210S) and Accessories
Outside view
Types and quantity of standard accessories
.Drive foot : 4
.Hexagonal head cap bolt (M4 x8) : 8
(Connecting bolt for extension console)
.Tie mount : 10
.Repeat tie : 4
.Tie band : 20
.Screw (PWH4 x8) : 16
.EX stage support UL : 1
.EX stage support UR : 1
.Reference pin : 1
.Spring washer4 : 1
2-1. Unpacking the Console
DMS-EX150L/
EX210S
Standard
accessory
Panel (front)
Bottom table
Panel (rear)
Top cap
Band
Metal fasteners
Metal
fasteners
Accessory box
Forks of forklift
Forklift labels
Supplied accessories
of the package
supporting equipment
Supplied accessories
of the package
supporting equipment
Outside dimensions when packed
in package
810 (W) x2135 (H) x1300 (D)

2-5
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Unpacking Procedure
1. Cut the four bands.
2. Remove the top cap.
3. Remove the six metal fasteners and remove the panel (front) and panel (rear).
4. Remove the polyethylene bag from the console.
5. Align the forks of the forklift with the forklift labels on the side of the console, hold up the bottom of
the console and move down from the bottom table.
6. Open the drive stage panel while referring to Section 6-5.
7. Pull out the bottom stage and remove the accessory box.
2-1. Unpacking the Console

2-6 DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
2-2. DMSA-AT80 and Accessory List
Outside view
Types and quantity of accessories
.Tie band : 10
.Repeat tie : 10
.Hexagonal head cap bolt with flange (M4 x12) : 7
Spacer
Spacers
Spacer
Spacer
Spacer
Packing carton
PC bracket (80)
FC bracket L (15)/
FC bracket R (15)
Accessory
(Tie band,
repeat tie)
Cable duct (80)
Cushion
Cushion
Cushion
FC mounting plate (80)
Cable clamps2
Accessory (screw)
PC bracket (80)
.Screw (B4 x5) : 10
.Screw (PWH4 x8) : 7
2-2. DMSA-AT80 and Accessory List

2-7
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
2-3. DMSA-EH16 and Accessory List
Outside view
Types and quantity of accessories
.Hub bracket 1 : 1
.Hub bracket 2 : 1
.Hub bracket 3 : 1
.Screw (B4 x6) : 2
.Screw (PWH4 x8) : 4
Packing carton
Spacer
Corner cushions
Corner cushion
Corner cushions
Corner cushions
Accessory
Document
Main unit
2-3. DMSA-EH16 and Accessory List

2-8 DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
2-4. DMSA-SBE1 and Accessory List
Outside view
Types and quantity of accessories
.Disk array cable (SHORT) : 1
.Monitor fixing plate : 2
.Belt : 1
.Round plate : 2
.Screw (PWH4 x8) : 4
2-4. DMSA-SBE1 and Accessory List
Spacer
Cushion
Cushion
Accessories
Accessory
Document
Packing carton
Main unit

2-9
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
2-5. DMSA-TS08/TS16/TS08K and Accessory List
Outside view
Types and quantity of accessories
.Cord with connector (T. S. SETUP) : 1
.Monitor fixing plate (Supplied with TS08/TS16) : 2
.Terminal server bracket (80/ETS8) (Supplied with TS08) : 2
.Terminal server bracket (EX/ETS8) (Supplied with TS08) : 2
.Terminal server bracket (EX/ETS16) (Supplied with TS16) : 2
.Belt (Supplied with TS16) : 1
.Round plate (Supplied with TS08/TS16) : 2
.Round plate (Supplied with TS08K) : 16
.Screw (PWH M4 x8) (Supplied with TS08/TS16) : 4
.Cord with connector (T. S. DRIVE) (10 m) (Supplied with TS08K) : 1
.Cord with connector (T. S. DRIVE) (5 m) (Supplied with TS08K) : 6
.Cord with connector (T. S. 8400IF) (Supplied with TS08K) : 1
.Cord with connector (T. S. B35) (Supplied with TS08K) : 1
Spacer
Corner cushions
Corner cushions
Corner
cushion
TS08K accessory
Document
Packing carton
Main unit
TS08
accessory
TS16
accessory
2-5. DMSA-TS08/TS16/TS08K and Accessory List

3-1
DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
Section 3
Installation Environment and Machine Mass
For safety and stable performance, use the DMS-B150L/B210S/B80L/B110S/EX150L/EX210S under the
appropriate environment as described below.
The floor on which the console is placed must have at least the specified strength.
3-1. Installation Environment
.Operation guaranteed temperature : 10 dC to 30 dC
.Relative humidity : 25% to 80% (no condensation)
.Horizontal tilting of floor : 0.06 degree or less
.Flatness of floor : 5 mm or less
.Height of ceiling : 700 mm or higher from the top of the console
.Strength of floor : 7.5 kN/m2or more and 3.5 kN/point or more
(750 kgf/m2or more and 350 kgf/point or more)
n
The load per point includes both the load from the caster that is 65 mm in diameter and 38 mm in width,
and the load from the surface that is 56 mm in diameter.
Do not install the consoles in the following locations:
.Locations subject to high temperatures and high humidity
.Locations near a heat source
.Dusty locations
.Locations subject to vibration
.Locations with a strong electric or magnetic field
3-2. Mass
Model Mass per unit Total mass 1 Total mass 2 Remarks
DMS-B150L 460 kg 645 kg 675 kg
DMS-B210S 465 kg 620 kg 650 kg
DMS-EX150L 200 kg 285 kg 295 kg
DMS-EX210S 195 kg 265 kg 275 kg
DMS-B80L 355 kg 480 kg 545 kg
DMS-B110S 360 kg 470 kg 535 kg
n
The total mass 1 means the maximum mass when cassette tapes and tape drives are installed.
The total mass 2 shows the maximum mass when the Package-supporting equipment such as terminal
server, hub, monitor and AC power cable kits are installed in the total mass 1.

3-2 DMS-B150L/B210S/B80L/B110S/EX150L/EX210S
3-3. Installation Space
The front side of the consoles should be at least 80 cm away from walls, and the rear side of the consoles
should be at least 100 cm way from walls.
In addition, leave a space of at least 70 cm above the consoles.
Model Outside dimensions (W xx
xx
xH xx
xx
xD) mm
DMS-B150L/B210S 1350 x1980 x975 (including 1350 x1980 x1100 table)
DMS-EX150L/EX210S 620 x1980 x1030 (including 620 x1980 x1100 table)
DMS-B80L/B110S 1100 x1605 x975 (including 1100 x1605 x1100 table) (DMSA-AT80 not installed)
DMS-B80L/B110S 1130 x1715 x975 (including 1130 x1715 x1000 table) (DMSA-AT80 installed)
3-3. Installation Space
1000
800
1100
1350
1000
800
1100
1100
1000
800
1100
620
DMS-B150L/B210S DMS-EX150L/EX210S DMS-B80L/B110S
(DMSA-AT80 not installed)
1000
800
1100
1130
DMS-B80L/B110S
(DMSA-AT80 installed)
Unit : mm