
Faulkner 4 Shelf 2 Drawer Unit to a SOLID, FLAT WALL.
4 Shelf 2 Drawer Unit
• ASSEMBLE ON A LEVEL, CLEAN SURFACE •
• TWO PERSON ASSEMBLY RECOMMENDED •
Regularly check that Anti-Tip Bracket and Screws are securely maintained.IMPORTANT:
Stability of tall items may be affected by thick carpets and uneven floors, or uneven and unstable walls.
Carefully check for any electrical wires or plumbing inside the wall before drilling any holes
Walls are constructed from different materials (i.e: Masonry = Solid Wall, Plasterboard = Hollow Wall) so it is important to use appropriate wall
fixings and screws for your wall type. Your local Hardware Store will stock the necessary extra screws, drill bits and fixings, and can offer suitable
advice if needed. DO NOT place TV Sets or other heavy objects on top of this Unit. DO NOT overload the shelves of this Unit.
NEVER allow children or adults to climb or hang on this Unit.
It is STRONGLY RECOMMENDED that you ANCHOR this product by
installing an ANTI-TIP BRACKET and SCREWS
and ATTACHING the
WARNING:
TOPPLING FURNITURE CAN CAUSE SERIOUS INJURIES AND DEATH.
DANGER:
SAFETY:
WARNING: Tip-over hazard.
BRACKET
(If unsure, contact a qualified Tradesman).
(sold separately by 3rd Party bracket makers)
HW0929
WHITE MATT FINISH
180cm H 50cm W 41cm D
ASSEMBLY INSTRUCTIONS PAGE 1
Solutions
Storage
A23 MADE IN CHINA
CARE CAUTION: TO CLEAN PARTICLE BOARD WITH MELAMINE FINISH, PLEASE CLEAN WITH A
SOFT, DRY CLOTH. DO NOT USE CHEMICALS OR DETERGENTS AND AVOID WATER AND DIRECT SUNLIGHT.
ASSEMBLY:
G1x 4 Hx 12
Dx 6 Jx 1
Dx 6 Jx 1 Ix 30
A4
B4
C8
D12
E16
F8
G2
H12
I30
J4
K1
DIAGRAM / DESCRIPTION
ID Qty
STEP
1
STEP
3
STEP
4
STEP
2
ENSURE UNIT IS
SQUARE PRIOR TO
FIXING BACK
BOARD (PART 8)
SEPARATE G1 & G2
RUNNERS BEFORE
ATTACHING G1
RUNNERS ON INSIDE
OF UNIT
←
G1 G2