Sauder Anda Norr 427346 User manual

sauder.com
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE STORE.
sauder.com
CONTACT US FIRST
BEFORE MAKING ANY RETURNS TO THE RETAILER.
Visit sauder.com/service to order replacement parts, view video assembly tips, or chat with a live rep.
Prefer the phone? Give us a ring at 1-800-445-1527.
Customer Service is available Monday-Friday - 9 a.m. to 5:30 p.m. EST (except holidays)
Sauder.com
Share your journey!
English pg 1-22
Français pg 23-25
Español pg 26-28
Lot # 555161 11/04/20
Purchased: __________________
Lateral File
Anda Norr Collection | Model 427346
Get all organized
and stu.

Part Identification
Hardware Identification
Hardware Usage Guide
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Table of Contents Assembly Tools Required
3
4
5
6-22
23-25
26-28
29-30
31
Page 2 www.sauder.com/service 427346

Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the edge
to help distinguish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.
A TOP (1)
B LEFT END (1)
C RIGHT END (1)
D UPPER BACK (1)
E LOWER BACK (1)
F BOTTOM (1)
G FOOT (2)
H BRACE (2)
J LEFT DRAWER SIDE (2)
K DRAWER BACK (2)
L RIGHT DRAWER SIDE (2)
M DRAWER BOTTOM (2)
N DRAWER BRACE (4)
O DRAWER FRONT (2)
P SAFETY BRACE (2)
A
B
C
D
E
F
G
H
J
P
GH
P
K
O
L
M
Page 3www.sauder.com/service427346
N

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
ANGLED HEAD
CAM SCREW - 11
5
Angled head
STRAIGHT HEAD
CAM SCREW - 16
6
Straight head
LARGE WOOD
DOWEL - 5
8
SMALL WOOD
DOWEL - 20
7
SHORT FILE HANGER - 4
9SHORT FILE
GLIDE - 4
10 LONG FILE HANGER - 2 11 LONG FILE
GLIDE - 2
12
LARGE HIDDEN
CAM - 11
3SMALL HIDDEN
CAM - 16
4
(EXTENSION SET SHOWN SEPARATED)
1EXTENSION RAIL - 4 2EXTENSION SLIDE - 4
PULL - 2
13 HOOK - 4 14 APPLIQUE CARD - 3
15 DRAWER INTERLOCK KIT - 2
16
1-1/2" FLAT HEAD SCREW - 23
17 1-1/8" FLAT HEAD SCREW - 10 18 9/16" FLAT HEAD SCREW - 8 19
9/16" PAN HEAD SCREW - 4
20 1/2" PAN HEAD SCREW - 36 21 1/2" MACHINE SCREW - 8
22
Page 4 www.sauder.com/service 427346

Hardware Usage Guide
HOW TO USE A HIDDEN CAM & CAM SCREW OR CAM DOWEL
NOTE: Various CAM SCREWS or a CAM DOWEL may be used.
Cam Screws Cam Dowel
Turn the CAM SCREW or
gently tap the CAM DOWEL
until the shoulder is against
the surface of the part.
1.
Hidden Cam
Arrow
Push a HIDDEN CAM into
the part. The arrow in the
HIDDEN CAM must point
toward the hole in the
edge of the board.
Hole
2.
3.
1
2
Insert the CAM SCREW or CAM DOWEL into the
HIDDEN CAM. Tighten the HIDDEN CAM.
Page 5www.sauder.com/service427346

Step 1 Look for this icon. It means a video assembly tip is
available at www.sauder.com/service/tips
Find the numbered video or scan the QR code.
å Assemble your unit on a carpeted floor or on the empty carton to
avoid scratching your unit or the floor.
å Push four LARGE HIDDEN CAMS (3) into the BACKS (D and E).
å Flip the UPPER BACK (D) over.
å Push three LARGE HIDDEN CAMS (3) into the UPPER BACK (D).
D
E
F
L
I
P
O
V
E
R
1
Arrow
3
3
Arrow
Arrow
3
D
Page 6 www.sauder.com/service 427346
Some assembly
(and snacks) required.

å Fasten the SAFETY BRACES (P) to the BACKS (D and E). Use ten 1-1/8" FLAT HEAD SCREWS (18).
å Turn four HOOKS (14) into the SAFETY BRACES (P).
å Insert five LARGE WOOD DOWELS (8) into the UPPER BACK (D).
å Push the LARGE WOOD DOWELS on the UPPER BACK (D) into the holes in the LOWER BACK (E).
Step 2
D
E
P
P
8
D
E
8
1-1/8" FLAT HEAD SCREW
(10 used in this step)
18
14
14
14
Page 7www.sauder.com/service427346
Surface with HIDDEN CAMS
Surface with HIDDEN CAMS

å Push four LARGE HIDDEN CAMS (3) into the ENDS (B and C).
å Flip the ENDS (B and C) over.
å Turn four ANGLED HEAD CAM SCREWS (5) into the ENDS (B and C).
Step 3
C
B
C
B
F
L
I
P
O
V
E
R
F
L
I
P
O
V
E
R
1
3
Arrow
5
5
Page 8 www.sauder.com/service 427346

å Separate the EXTENSION SLIDES (2) from the EXTENSION RAILS (1) as shown in the upper diagram below. Be
prepared, the parts are greasy.
å Fasten the EXTENSION RAILS (1) to the ENDS (B and C). Use twelve 1/2" PAN HEAD SCREWS (21) shown in the
enlarged diagram.
å NOTE: For each EXTENSION RAIL, turn a SCREW into the hole indicated in the enlarged diagram. Then, slide the inner
cartridge of the EXTENSION RAIL in to find the other holes that lines up with the hole in the END. Turn a SCREW into
these holes.
å NOTE: The EXTENSION SLIDES will be used later for the DRAWERS.
Step 4
Pull up or down the black lever in
and pull the SLIDE from the RAIL.
7
C
B
1
2
1/2" PAN HEAD SCREW
(12 used in this step)
21
Open end
Open end
Open end
Page 9www.sauder.com/service427346
1
1
1
1
Surface with CAM SCREWS Surface with CAM SCREWS
Put the SCREW
into this hole first

å Insert eight SMALL WOOD DOWELS (7) into the BACKS (D and E).
å Fasten the ENDS (B and C) to the BACKS (D and E). Tighten four HIDDEN CAMS.
å NOTE: Be sure the WOOD DOWELS in the BACKS insert into the ENDS.
Step 5
Surface with HIDDEN CAMS
1
Surface with SAFETY BRACE
Surface with SAFETY BRACE
Surface without HIDDEN CAMS
C
B
7
D
E
7
7
7
Page 10 www.sauder.com/service 427346
Open end
Open end

å Insert six SMALL WOOD DOWELS (7) into the BOTTOM (F).
å Fasten the BOTTOM (F) to the ENDS (B and C) and LOWER BACK (E).
Use seven 1-1/2" FLAT HEAD SCREWS (17).
å NOTE: Be sure the WOOD DOWELS in the BOTTOM insert into the
ENDS and LOWER BACK.
Step 6
C
B
E
F
7
7
Surface with more holes
1-1/2" FLAT HEAD SCREW
(7 used in this step)
17
Page 11www.sauder.com/service427346

å Fasten the FEET (G) to the BRACES (H). Use eight 1/2"
MACHINE SCREWS (22).
Step 7
G
GH
H
1/2" MACHINE SCREW
(8 used in this step)
22
22
Page 12 www.sauder.com/service 427346

å Fasten the FEET (G) to the BOTTOM (F). Use eight 9/16"
FLAT HEAD SCREWS (19).
Step 8
F
G
G
9/16" FLAT HEAD SCREW
(8 used in this step)
19
19
Page 13www.sauder.com/service427346

å Push eight SMALL HIDDEN CAMS (4) into the DRAWER
SIDES (J and L) and DRAWER BRACES (N).
å Turn eight STRAIGHT HEAD CAM SCREWS (6) into the
DRAWER FRONT (O).
å Repeat this step for the remaining DRAWER SIDES,
DRAWER BRACES and DRAWER FRONT.
Step 9
J
L
N
O
N
1
Arrow
4
6(16 used)
(16 used)
Page 14 www.sauder.com/service 427346
Now might be a
good time to refresh
your drink.

Step 10
With the palm of your hand,
tap the DRAWER BOTTOM
down into the groove.
å Fasten the DRAWER BACK (K) to the DRAWER SIDES (J and L) and DRAWER BRACES (N). Use eight 1-1/2" FLAT
HEAD SCREWS (17).
å NOTE: Be sure the DRAWER BOTTOM (M) inserts into the groove of the DRAWER BACK (K).
å Repeat this step for the remaining DRAWER.
å Fasten the DRAWER SIDES (J and L) and DRAWER
BRACES (N) to the DRAWER FRONT (O). Tighten eight
SMALL HIDDEN CAMS.
å Slide a DRAWER BOTTOM (M) into the grooves in the
DRAWER SIDES (J and L) and DRAWER FRONT (O).
Be sure the
DRAWER
BOTTOM inserts
into the DRAWER
BACK groove.
1 2
3
J
LN
N
O
J
LO
M
Groove
KJ
LN
N
1-1/2" FLAT HEAD SCREW
(16 used in this step)
17
M
Page 15www.sauder.com/service427346
1

å Fasten the EXTENSION SLIDES (2) to the DRAWER SIDES (J and L).
Use six 1/2" PAN HEAD SCREWS (21) through the holes shown in
the enlarged diagram.
å Push the PULL (13) through the opening in the DRAWER FRONT (O).
Use two 9/16" PAN HEAD SCREWS (20).
å Repeat this step for the remaining DRAWER.
Step 11
J
L
O
Open end
Open end
Open end
2
1/2" PAN HEAD SCREW
(12 used in this step)
21
13
9/16" PAN HEAD SCREW
(4 used in this step)
20
(2 used)
Page 16 www.sauder.com/service 427346
2
2

å Fasten the LONG FILE HANGER (11) to the DRAWER
FRONT (O). Use six 1/2" PAN HEAD SCREWS (21).
å Repeat this step for the remaining DRAWER.
Step 12
11O
1/2" PAN HEAD SCREW
(12 used in this step)
21
Page 17www.sauder.com/service427346

å NOTE: The file drawer will hold both legal and letter size folders depending on how
you place the FILE GLIDES and HANGERS in the drawer.
å Push the SHORT FILE GLIDES (10) onto the DRAWER SIDES (J and L).
å Push the LONG FILE GLIDE (12) onto the DRAWER BACK (K).
å Place the SHORT FILE HANGERS (9) onto the LONG FILE HANGER (11) and
LONG FILE GLIDE (12).
å Repeat this step for the remaining drawer.
Step 13
J
L
K
12
10
109
9
11
Page 18 www.sauder.com/service 427346

å Carefully stand your unit upright.
å Open the DRAWER INTERLOCK KITS (16) and pull the SAFETY STRAPS through the HOOKS on the
SAFETY BRACES (P).
å To insert the lower drawer into your unit, line up the EXTENSION SLIDES on the drawer with the EXTENSION RAILS
on the unit and push the drawer into the unit until the drawer is fully inserted. The drawer will push in hard until it is all
the way in, then it will slide in and out easier.
å Fasten the drawer to the SAFETY STRAPS. Use the SCREWS and BOLTS as shown in the enlarged diagram.
Step 14
16
SCREW
BOLT
Page 19www.sauder.com/service427346
Pro Tip: Lift with your
legs. And, you know,
your arms.

å To insert the upper drawer into your unit, line up the
EXTENSION SLIDES on the drawer with the EXTENSION
RAILS on the unit and push the drawer into the unit until
the drawer is fully inserted. The drawer will push in hard
until it is all the way in, then it will slide in and out easier.
å Fasten the drawer to the SAFETY STRAPS. Use the
SCREWS and BOLTS as shown in the enlarged diagram.
Step 15
16 SCREW
BOLT
Page 20 www.sauder.com/service 427346