feather&black Sienna Dressing Table User manual

1
Sienna Dressing Table
Assembly Instructions
Pre-assembly Preparation
Please read these instructions fully prior to assembly to familiarise yourself with the various stages of
construction. Carefully open all packs supplied and check the contents against the parts and fittings check
list.
Do not destroy any of the packaging until you are certain that you have all the necessary parts for the
assembly.
This item is heavy once assembled. Please try to assemble the item as close as possible to the point of use.
Take care when moving the item to avoid personal injury or damage to the product and always lift rather than
drag.
There are small components used in the construction of this furniture as well as plastic foil packaging, these
should be kept away from young children whilst assembling.
Product Safety
All assembly fastenings should always be tightened properly and care should be taken to ensure that no
fittings are loose.
Periodically check and ensure that all components are in their proper position, free from damage, and that all
connectors are tight.
Product Care
To clean, slightly moisten cloth with water and wipe surfaces. A damp cloth holds dust and prevents damage.
repeat with a dry, soft, lint-free cloth.
Do not use abrasives or cleaning products which may contain ammonia or solvents
If you require any advice during assembly please call our customer service team on 01243 380600.

A
PARTS Q'TY
4PCS
1PC
Matchtheleg(B)whichcorrespondswith
thecorrectcornerblock
1PC
8PCS
8PCS
B
C
D
E
feather&black
M8(108mm)
1/4"*55mm
1/4"*20mm
Sienna Dressing Table Assembly Instructions
2