Home Styles 88 5053 15 User manual

88 5053 15
Pedestal Desk
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Tools recommended for assembly : Level
A.
Top
1 pc.
B.
Keyboard
1 pc.
C.
Shelf
2 pcs.
D.
Shelf
2 pcs.
E.
Side Frame
2 pcs.
F.
Side Frame
1 pc.
G.
Side Frame
1 pc.
H.
Stretcher
1 pc.
I.
Stretcher
1 pc.
J.
Stretcher
8 pcs.
Hex Wrench
1 pc.
Small Wrench
1 pc.
M6x35
Tapered Head Cap Bolt
2 pcs. (+1 extra)
M6x16
Head Cap Bolt
52 pcs. (+8 extra) Spring Washer
52 pcs. (+8 extra)
Flat Washer
52 pcs. (+8 extra)
Adjustable Pin
8 pcs.

Assembly Instructions 2/4
IMPORTANT
* Please keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* Do not tighten up all the bolts until each part is properly assembled.
* Use a soft cloth between these parts and the floor.
* After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Stretcher (H) to Side Frame (F) with
Head Cap Bolts, Spring Washers and
Flat Washers.
(See Figure 1)
Attach Stretcher (I) to Side Frame (F)
withTapered Head Cap Bolt.
(See Figure 2)
Attach Side Frame (G) to unit with
Head Cap Bolts, Spring Washers, Flat
Washers and Tapered Head Cap Bolt.
F
G
H
I
Tapered Head Cap Bolt
Head Cap Bolt
Spring Washer
Flat Washer
STEP 2
Attach Stretchers (J) to unit with Head Cap Bolts, Spring Washers and Flat Washers.
J
J
J
JJ
J
J
J
Head Cap Bolt
Spring Washer
Flat Washer
Figure 1 Figure 2

Assembly Instructions 3/4
STEP 3
Attach Side Frames (E) to unit with
Head Cap Bolts, Spring Washers and Flat Washers.
E
E
Head Cap Bolt
Spring Washer
Flat Washer
STEP 4
Attach Shelves (D) to unit with
Head Cap Bolts, Spring Washers and Flat Washers.
D
D
Head Cap Bolt
Spring Washer
Flat Washer

Assembly Instructions 4/4
Figure 3
C
C
B
A
STEP 5
Place Top (A) upside down on a
soft cloth.
Attach unit to Top (A) with
Head Cap Bolts, Spring Washers
and Flat Washers.
Head Cap Bolt
Spring Washer
Flat Washer
STEP 6
Slide Keyboard (B) into position.
If you want to remove the keyboard in the future, push the plastic lever on its’ left side up, push
the plastic lever on its’ right side down and pull open slowly. (See Figure 3)
Insert Adjustable Pins into unit at the desired level.
Place Shelves (C) into position.
To level the unit, adjust the adjustable levelers on the bottom of unit. (See Figure 4)
Figure 4
Note: Unit must be level to work property.
Adjustable Pin