Home Styles Floral Blossom User manual

Key Wrench
1 pc.
Bolt
4 pcs.(+1 extra) Flat Washer 12 pcs.(+1 extra)
Spring Washer
12 pcs.(+1 extra) Nut
12 pcs.(+1 extra)
Nut Cap
12 pcs.(+1 extra)
A.
Top
1 pc.
D.
Cover
1 pc.
B.
Leg
4 pcs.
C.
Side Frame
4 pcs.
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the wood parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
88 5558 30
Floral Blossom
Round Dining Table
Tools required for assembly : Tools recommended for assembly :Slotted screwdriver Level
Part List
Hardware List

Assembly Instructions
STEP 1
STEP 2
Figure 1
Figure 2
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Key Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
* After assembly, item must be level to work properly. Use the included adjustable levelers to level.
B
B
B
BC
C
C
C
A
Nut Cap
Nut
Spring Washer
Flat Washer
Nut Cap
Nut
Spring Washer
Flat Washer
Bolt
Figure 3
Assemble Side Frames (C) and Legs (B)
with Flat Washers, Spring Washers, Nuts
and Nut Caps. (See figure 1)
Insert Bolts into the pre-drilled
holes of Top (A) by using
Slotted Screwdriver.
(See Figure 2)
Attach unit ot Top (A)
with Flat Washers,
Spring Washers, Nuts
and Nut Caps.
D
STEP 3
Turn the table to its’ upright position.
Cover the umbrella hole with Cover (D).
To level the table, adjust the adjustable
levelers on the bottom of legs.
(See Figure 3)