HAMPTON BAY MARSHALL HD14303 User manual

Item #1000018759,
639351, 639262
Model #HD14303,
HD14302, HD14304
USE AND CARE GUIDE
1-855-HD-HAMPTON
THANK YOU
HAMPTONBAY.COM
MARSHALL 40 in. SQUARE DINING TABLE
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8:00 a.m. - 6:00 p.m., EST, Monday-Friday
We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this table. We strive
to continually create quality products designed to enhance your home. Visit us online to see our full line of products available
for your home improvement needs. Thank you for choosing Hampton Bay!

Table of Contents..........................................................2 Pre-Assembly...............................................................3
Safety Information.........................................................2
Warranty.........................................................................2
Care Instructions...........................................................2
Table of Contents
Safety Information
Warranty
Care Instructions
WHAT IS COVERED
2 YEAR FRAME LIMITED WARRANTY
2 Year Frame Limited Warranty
We warrant the frame to be free of manufacturing defects to the original purchaser for two years.
WHAT IS NOT COVERED
Assembly......................................................................5
What Is Covered
What Is Not Covered
Planning Assembly
Hardware Included
Package Contents
2
DANGER: Please keep children out of the assembly area
before assembly.
WARNING: Do not sit or stand on the table.
CAUTION: Use the table on flat ground only.
IMPORTANT: Please check the tightness of the bolts at
least every 90 days.
WARNING: Do not put heavy objects on the table.
NOTE: Level the table with glides at the bottom of each
leg.
It remains the customer’s responsibility for freight and packaging charges to and from our service center. This warranty does not cover
commercial use, hardware, acts of nature, fire, freezing and abusive use. In addition, purchased parts are not covered under this warranty.
We reserve the right to make substitutions with similar merchandise, if the model in question is no longer in production.
Before using, wipe with a clean, dry cloth. Do not use bleach or solvents. Treat the frame with liquid wax for maximum protection against
UV light and salty,damp air. When not in use, store furniture in a cool, dry place. If your set includes cushions or mesh fabric, they may
be cleaned by hand with a mild solution of soap and water. Rinse cushions thoroughly and allow to drip dry. Do not machine wash or
tumble dry, as cushions may shrink. Do not use bleach or solvents on fabrics. When cleaning the tabletop make sure to use a soft,
clean cloth that does not bleed color.
You may contact our customer service department with any questions by phone at 1-855-HD-HAMPTON or visit www.hamptonbay.com.
....................................2
.......................................................2
..................................................2
...................................................3
...................................................3
....................................................4

Pre -Assembly
PLANNING ASSEMBLY
HARDWARE INCLUDED
It will take two people about 10 minutes to complete the assembly process.
Assemble this product on a blanket or towel or other soft, non-abrasive surface to avoid scratching the finish.
_____AA _____BB _____CC
3HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
AA 8
8
8
1
Bolt (M8 x 35 mm)
Metal Washer
Plastic Bolt Cap
Hex Wrench
BB
CC
DD
_____DD
QuantityDescriptionPart
NOTE:
Hardware not shown to actual size.

Pre-Assembly (continued)
PACKAGE CONTENTS
_______A
_______B
4
1
4
A
B
QuantityPart Description
Table Top
Table Leg

Assembly
Attaching the legs to the table top
IMPORTANT:
1Covering the bolts
2
Turning the table
3
5HAMPTONBAY.COM
Please contact 1-855-HD-HAMPTON for further assistance.
Place the table top (A) upside down so the pre-drilled
corner holes are visible.
Align and attach the table legs (B) to the corners of the table
top (A), by inserting bolts (AA) with metal washers (BB)
through the pre-drilled holes.
Loosely tighten with the hex wrench (DD).
Tighten all the bolts using the hex wrench (DD) and then
cover them with the plastic bolt caps (CC).
With assistance, carefully turn the table in the upright
position.
Your table is now ready for use, so, relax & enjoy!
attached and initially tightened only a few revolutions.
Then tighten further, one at a time, alternating between
the four legs. Do NOT fully tighten one leg before you
attach the other legs.
Each of the four leg bolts should be
AA
BB
B
A
BB
AA
CC

Retain this manual for future use.
Questions, problems, missing parts? Before returning to the store,
call Hampton Bay Customer Service
8:00 a.m. - 6:00 p.m., EST, Monday-Friday
1-855-HD-HAMPTON
HAMPTONBAY.COM