Feelworld Master MA6 User manual

Guide Manual
Thank you for choosing Feelworld monitor.
Please read this manual carefully before you use.
MA6
5.7" Full HD On-camera Monitor
Support 4K HDMI Input/ Output

Contents
Caring For Your MA6 Monitor
What Should Be In The Box
Product Description
Button Instruction
Port Instruction
1/4" Screw Lock Installation
Sunshade
Battery Plate
Menu Operation Instruction
Menu Function Instruction
Technical Parameters
Trouble Shooting
01
02
03
04
05
06
07
08
11
12
17
19

1
CARING FOR YOUR MA6 MONITOR
•Do not attempt to disassemble the monitor. Doing so voids
warranty.
•Water damage is not covered by warranty, but taking the right
precautions when a water event occurs can sometimes preserve
unit functionality.
• Clean the screen with a high quality microber cloth only.
Never spray the screen directly with any sort of cleaning uid.
•Keep away from the heat source and avoid long exposure to
the sun.
•Do not cover the vents in case of overheating problems.
•For better product lifetime, try not to impact, crush or scratch
on the monitor.
Caring For Your MA6 Monitor

2
WHAT SHOULD BE IN THE BOX
What Should Be In The Box
• MA6 Monitor
• HDMI to Mini HDMI Cable
• HDMI to Micro HDMI Cable
• Tilt Arm
• 1/4’’ Screw Lock
• F970 Battery Plate
• Carrying bag
• Sunshade
• Manual

3
• Front Panel
• Back Panel
PRODUCT DESCRIPTION
Product Description

4
• Button Instruction
PRODUCT DESCRIPTION
①/②
F1/F2: Customized settings.
③/④
/ : Volume adjustment; value adjustment of
selected item.
⑤MENU: Menu entry and exit; conrmation of item
adjustment.
⑥/⑦
/ : Item selection in OSD operation
⑧:Power On/Off
⑨ Power Indicator: Red light - power on; Green light - signal in.

5
PRODUCT DESCRIPTION
• Port Instruction
①
DC12V: DC power input interface, as the input polarity
②:Earphone port output
③USB upgrade port
④ 1/4" screw lock
⑤ HDMI-OUT: HDMI signal output
⑥ HDMI-IN: HDMI signal input

6
PRODUCT DESCRIPTION
• 1/4" Screw Lock Installation
You can install it either at the bottom or on the right side of the
monitor.
①Fasten the 1/4" screw lock with the monitor.
② Tighten the screws to x the 1/4" screw lock on the monitor.

7
PRODUCT DESCRIPTION
① Sunshade
③Fixed Frame
② Sunshade Frame
④Sunshade Application
• Sunshade
First open the Sunshade Frame ①, and match the sticker on
the sunshade inside to the marked part of the sunshade frame
②, smooth and press 3 sides on the sunshade ③, and then
complete the sunshade installation ④.

8
PRODUCT DESCRIPTION
• Battery Plate
There is a battery plate on the back of the monitor, a
corresponding battery needs to be installed to power the
monitor. We offer several portable powering options to help
our customers reduce the amount of charging equipment that
is plugged in the set.

9
PRODUCT DESCRIPTION
Battery Plate Model Picture Battery Camera Model
F970 for
Sony DV
F970 F960 F950 F930
F770 F750 F730 F570
F550 F530 QM91D QM91
QM90D QM90 QM71D
QM71 QM70D QM70
QM51D QM51 FM71
FM70 series
LP-E6 for
Canon DV
LP-E6
D28S for
Panasonic DV
D55 554S D54SE D40
D35 D33 D32 D28 D25
D22 series
U60 For Sony
DV
BP-U30/U60/U90,
Chinese version U62/U65/
U66/U95/U98 series

10
Remark: Different specications of the battery result in different
capability and working time. Please remove the battery from the
monitor if you don’t use it for a long time.
CAUTION: RISK OF EXPLOSION IF AN INCORRECT
BATTERY IS REPLACED. PLEASE DISPOSE USED BATTERIES
ACCORDING TO INSTRUCTIONS.
PRODUCT DESCRIPTION

11
MENU OPERATION INSTRUCTION
• Press “MENU” button to enter OSD main menu, and press “ ”
or “ ” button to go through the secondary menu function.
• Then press “ ” button to enter secondary menu, and press
“ ” or “ ” button to move cursor and select the items on the
secondary menu.
• Press “ ” or “ ” button to adjust the related parameters
on the secondary menu.
• Press “MENU” button twice to conrm the item adjustment
and exit the menu.
Menu Operation Instruction
After correctly connect to the power supply, press to turn on
the monitor, the monitor turns to working state.

12
Menu Function Instruction
MENU FUNCTION INSTRUCTION
Image
Pic. Mode Dynamic, Standard, Mild, User
Brightness 0~100
Contrast 10~100
Saturation 0~100
Sharpness 0~100
Color Temp 6500, 9300, User
Tint 0~100
• Image

13
MENU FUNCTION INSTRUCTION
Setting
Language
English, 简体中文 , Español, Português,
Français, Nederlands, Deutsch, 日本語 ,
繁體中文
Aspect Ratio Just Scan, Panorama, Auto., 4:3, 16:9, P2P
No Signal White Screen, Blue Screen, Red Screen,
Green Screen, Black Screen
OSD Trans. Off, Low, Middle, High
OSD H 0~100
OSD V 0~100
OSD Time Off, 10Sec, 20Sec, 30Sec
Backlight 0~100
Power On Auto., Manual
USB Upgrade Copy the le to the U disk, connect the
USB cable, press “ ” button to conrm
Reset Press “ ” button to conrm, back to
original setting
• Setting

14
MENU FUNCTION INSTRUCTION
Function
Center Marker Off, On
Safe Frames Off, 80%, 85%, 90%, 96%, 93%, 2.35:1
Nine Grid Off, On
Image Freeze Off, On
Image Flip Off, H_V Flip, H Flip, V Flip
OSD Flip Off, On
Anamorphic Off, 1.3X, 2.0X, 2.0X MAG, User
Anamorphic nX 1.20X~2.00X
• Function
• Zoom
Image
Nine Grid Zoom Off, On
Zoom Off, 4X, 9X, 16X
Zoom Mode Off, Mode1, Mode2 (Zoom All, L/R
Zoom and U/D Zoom for choice)
Scan Mode Under Scan, Over Scan

15
MENU FUNCTION INSTRUCTION
Function
Check Field Off, Mono, Red, Green, Blue
Histogram Off, On
False Colors Off, On
Focus Assist Off, On
Peaking Color Red, Green, Blue
Over Exposure Off, On
Exposure Lever 1～100 IRE
Ratio Marker Off, 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1,
2.35:1
Mark Color Red, Green, Blue, Black, White
Mark Width 1～7
Modied Mark 0～6

16
★Users can self-dene maximum 2 shortcut keys F1 and F2 on
the panel.
For example: Choose “F” on OSD menu, press “ ” button
to select F1, then press “ ” or “ ” button for more items
and use “ ” or “ ” to select one of them, e.g. “Focus
Assist” and press “MENU” button to conrm. After setting, you
can press “F1” directly on the panel to activate “Focus Assist”
function. Same way to set “F2” shortcut key.
• Custom Button Setting F1~F2
MENU FUNCTION INSTRUCTION
Available functions: Center Marker, Safe Frames, Check
Field, Focus Assist, Aspect Ratio, Image Flip, Image Freeze,
Histogram, False Colors, Over Exposure, Nine Grid, Zoom,
Anamorphic.