Feelworld FW619AHT Instruction Manual

TFT LCD COLOR MONITOR
Manual of operation
1

2
De
of ways, to name some of them: convenience, safety,
ar users,
Thank you for purchasing the liquid crystal display monitor. This product
employs new integrate circuits and high quality TFT LCD modules. It is putting
out with its low power consumption, emits no radiation, and other advantage
characteristics. This product is shaped with modern style and is easy to be
carried with. The color TFT LCD is the most suitable display for VGA,VCD,
DVD and GPS system for motorcars and ships. It also can be used in the office,
in flat, at home also in other suitable position. You will certainly benefit from this
monitor in lots
space-saving.
We hope that you will have the enjoyment of your new mini color TFT LCD.
To ensure the best use of the un is handbook carefully beforehand.it, please read th
CAUTION
1. Please use the adapter attached in the accessory.
2. Do not expose this product to direct sunlight, heat or humid conditions.
3. Keep away from strong light while using this product so as to obtain the
lease simply wipe with a
of other controls may result in damage and will often require
xtensive.
clearest and the most colorful picture.
4. Please avoid heavy impact or drop onto the ground.
5. Do not use chemical solutions to clean this unit. P
clean soft cloth to keep the brightness of the surface.
6. If the product does not operate normally when the instructions are followed.
Adjust only those controls that are covered by the instructions. Improper
adjustment
e

3
CONTENTS
1.
4. ACCESSORIES ----------------------------------13
OTING ------------------------ 13
1.
z
Model 1:
PRODUCT DESCRIPTION --------------------3
zDESCRIPTION OF MONITOR--------------3
zREMOTE CONTROLLER -------------------6
zMATCHED CABLE ----------------------------6
zCONNCETION ---------------------------------7
2. MENU OPERATION -----------------------------7
3. PARAMETER -------------------------------------12
5. TROUBLE SHO
Product description
Description of monitor
Picture 1（A）
1. Indicator light
2. : Power on/off
3. ：PC, AV switch.
4. ：
5. Infrared receiving window
Volume down or to adjust the value of setting function

4
6. ：Volume up or to adjust the value of setting function
7. ：To activate OSD menu.
8. ：Selection key, to adjust phase directly.
9. ：Selection key, to adjust the brightness directly.
k
11. HDMI input jack (optional)
KS input jack
Model 2:
10. DC12V input jac
12. S
Picture 1（B）
1. Infrared receiving window
2. : Power on/off
3. ：tionVolume up or to adjust the value of setting func
4. ：Volume down or to adjust the value of setting function
5. ：irectly.Selection key, to adjust the brightness d
6. ：To activate OSD menu.
7. ：Selection key, to adjust phase directly.
8. ：PC, AV switch.
9. DC12V input jack
10. SKS input jack

5
Model 3:
Picture 1（C）
1. ：Volume down or to adjust the value of setting function
2. ：Volume up or to adjust the value of setting function
3. ：To activate OSD menu.
4. ：Selection key, to adjust phase directly.
5. ：Selection key, to adjust the brightness directly.
6. ：PC, AV switc
wi
h.
ndow
8.
7. Infrared receiving
: Power on/off
9．DC12V input jack
10．SKS input jack

6
zRemote controller
Picture 2
1. ：Power on/off
2. : MUTE
3. : To activate OSD menu.
4. : Volume down or to adjust the value of setting function
5. : Volume up or to adjust the value of setting function
6. : Selection key, to adjust the brightness directly.
7. : Selection key, to adjust phase directly.
8. : Aspect ratio switch,4：3/16:9
9. ：UP/ DOWN Switch
10. ：Right/Left Switch
11. ：A 1/AV2/ PC SwitchV
zMatched cable
AV cablPicture 3 ( e)
put jack of the unit 1. SKS input end connect the SKS in

7
put
. Yellow RCA jack for video 1 input
2. Black 9-pin plug for VGA signal in
. Black jack DC12v power input3
4
5. White RCA jack for audio input
6. Red RCA jack for video 2 input
. Black 9-pin jack connect 9-pin plug of picture 3
2. USB end connect the USB port of computer for touch screen function.
al input end connect VGA port of the computer
mo
foll
note
of picture 4 will be connected to
then tighten the screws . The USB
uter for touch screen function.
4.
5. Black jack c
6. When you use the unit, please adopt matched DC adapter, if not, please
Picture 4 (VGA cable)
1
3. 15-pin VGA sign
2．Connection
Put the SKS input end of AV cable picture 3 into the AV input jack of the
nitor, the other jack of A/V cable should be connected with related signal as
ows .
to the 9-pin jack of picture 4 (1. Black 9-pin plug of picture 3 is connected
endthe arrowhead),the VGA signal input
r ,the VGA port at the back of compute
compend connects the USB port of the
2. Yellow RCA jack connect video signal 1
3. Red RCA jack connect video signal 2
White RCA jack connect audio signal
onnect DC12v power
note that the power consumption should be less or equal to 10w.
● Manual operation
After connecting power, the unit will be in standby state（red light）. Press ” ”
on the unit or on the remote controller, the buttons of the unit will blue light, at
hat time the unit begins to work. Presst
re
the same button again the unit will
turn to its standby state (Note the blue button will black out in 5 or 6 seconds
soon after you turn V” on the unit oroff unit.). Push “PC/A on the remote
controller to switch between AV and PC.

8
OSD in PC mode ：
mode：OSD in AV
You can press “ ”/“ ” on the unit or on the remote controller to select
the items: （COLOR） （ JU ）AD ST （MENU） （EDIT） （VOLUME），
and confirm buy pressing “ ”/“ ” on the unit or on the remote controller,
then push “ ”/“ ” again to adjust the items. Push “ ” to exit the OSD
after your adjus
● Description of OSD：
t。
In PC mode：
（Color）：
of OSD, use “ After ter int olor” itemen o “C ”/“ ”to select and then

9
push“”/“”to adjust.
※Brightness: To adjust the brightness.
※Contrast: To
※Color Temp：To
adjust the contrast of image.
adjust the contrast of Color Temp.
Color temperature of OSD is adjustable. Press “</>”on the unit or on the
tem rature at first such as: 6500 Ks, 7500 Ks or 9300 Ks by pressing“
remote controller to select “Color Temp”, then you can choose to set color
pe ”/
“ ” . You can also adjust a color temperature that wants the option
“U R" then can adjust RED, GREEN and BLUE
s
SE at will by pushing“”/
“” . With attain which want of the color value.
Note: when you select the “USER” item a mini box will appear in the right
bottom corner of the OSD. As picture below.
（Adjust）：
djust is not satisfy
your req
re in horizontal.
Phase：To adjust the phase.
Clock：To adjust the clock, make field and line synchronization.
※Auto Config：To adjust automatically .If the auto-a
uest, you can adjust manually.
※ H Position：To adjust the pictu
※ V Position：To adjust the picture in vertical.
※
※

10
（OSD）：
※ Lang
lians
Pycc
al.
l.
OSD Timeout：To adjust the clock.
※ Tr ：
uage：8 languages for OSD as below：
English 简体中文 Francois Ita
Deutsch Español Japanese
※ H Position：To adjust the OSD position in horizont
※ V Position：To adjust the OSD position in vertica
※
ansparent To adjust the level of transparent.
（Function）：
※ Reset：Back to original setting.
※ Display Ratio：To change the display ratio,16:9/4:3.
LR Rotation：To change the picture left/right.
※ UD Rot n To
※
atio ：change the picture up/ down.
（Sound）：
Volume: To adjust the volume. ※

11
In mode： AV
（Color）：
ss.
C mode.
※S ust the saturation.
※Brightness: To adjust the brightne
※Contrast: To adjust the contrast.
※Hue: To adjust the hue adjust in NTS
aturation: To adj
（OSD）：
※ Lan
al.
ion in vertical.
st the level of transparent.
guage：2 languages for OSD as below：
English 简体中文 Francois Italians
Deutsch Español Japanese Pycc
※ H Position：To adjust the OSD position in horizont
※ V Position：To adjust the OSD posit
※ OSD Timeout：To adjust the clock.
※ Transparent：To adju
（Function）：

12
9/4:3.
To change the picture up/ down.
※ Reset：Back to original setting.
※ Display Ratio：To change the display ratio,16:
※ LR Rotation：To change the picture left/right.
※ UD Rotation：
（Sound）：
e: To adjust the volume.
．Parameter
Parameter
※Volum
3
Model 1 Model 2 Model 3
Display panel TFTLCD7.0inch
1152000 Pixels
TFTLCD7.0inch
1152000 Pixels
TFTLCD7.0inch
1152000 Pixels
Resolution 800×480(VGA) 800×480(VGA) 800×480(VGA)
Up resolution 440(VGA) 440(VGA) 440(VGA)1920×1 1920×1 1920×1
Brightness /㎡(without touch /㎡(without touch /㎡(without touch300 cd
screen)
300 cd
screen)
300 cd
screen)
Contrast 500:1 500:1 500:1
Viewing angle 70 °/70 °,50 °/60 °
(L/R,U/D)
/60 °
(
70 °/70 °,50 °/60 °
(L/R,U/D)
70 °/70 °,50 °
L/R,U/D)
Video signal input 0. Ω7～1.4Vp-p/75
VGA signal input H:30～60kHz
V:60～75Hz
Speaker ≥250mW/8Ω
Color system PAL-4.43; NTSC-3.58
Voltage DC 10﹪12V±
Signal input PC (VGA). A DMI Model 1 optional）V1. AV2（H
Power consumption ≤6w
Work temperature －20～55℃
Store temperature －30～65℃
S ize（mm）188(L)×129(W)×40(H) 184(L)×126(W)×32(H) 184(L)×126(W)×32(H)

13
isk 1pc(optional)
Touch pen 1pc
1copy
5．
from the video out
bnormal colors
e cables to make sure it is securely
Remote controller doesn't work
ttery is installed properly and make
ot a low battery. The signal is interfered by some obstructions.
Remark:
normal standard
t is a normal condition that some bright lines appear on the screen when you
4Accessories．
Power adapter
er
1pc
Car power adapt 1pc
SKS cable 1pc
9-pin VGA cable
trol
1pc
Remotecon 1pc
Bracket
Touch screen driver d
1pc
Operation manual
Trouble shooting
a) Only black-and-white image
Make the level of color saturation and brightness is proper.
Power on but no picture※
M le is tightly connectedake sure the AV &VGA cab
connector & VGA signal output connector. Make sure you are using the
standard power adapter coming with the monitor.
Wrong or a※
If any color is missing, check th
connected. Broken or loose pins in the cable connector can cause a bad
connection.
※
Check the battery to make sure the ba
sure it is n
■
If there are still any problems, you can connect with the related deals
*If interruptive image occurs, it maybe that the VGA signal frequency isn’t
matched with
*I
turn the unit.