Feelworld Master MA7U User manual

7" 2200nit Ultra Bright
Daylight Viewable On-Camera Monitor
Guide Manual
Thank you for choosing Feelworld monitor.
Please read this manual carefully before you use.
MA7U
FW279S Feelworld master图纸
20181207

Contents
Caring For Your MA7U Monitor
What Should Be In The Box
Product Description
Front Panel/ Button Instruction
Rear Panel Instruction
Battery Plate
Menu Operation Instruction
Menu Function Instruction
Technical Parameters
Trouble Shooting
01
02
03
09
10
15
17
03
05
07

1
CARING FOR YOUR MA7U MONITOR
• Do not attempt to disassemble the monitor. Doing so voids
warranty.
•Water damage is not covered by warranty, but taking the right
precautions when a water event occurs can sometimes preserve
unit functionality.
• Clean the screen with a high quality microber cloth only.
Never spray the screen directly with any sort of cleaning uid.
• Keep away from the heat source and avoid long exposure to
the sun.
• Do not cover the vents in case of overheating problems.
• For better product lifetime, try not to impact, crush or scratch
on the monitor.
Caring For Your MA7U Monitor

2 3
WHAT SHOULD BE IN THE BOX
What Should Be In The Box
PRODUCT DESCRIPTION
Product Description
• MA7U Monitor
• HDMI to Mini HDMI Cable
• SDI Cable
• D-Tap Cable
• Cold Shoe Mount
• Carrying bag
• Manual
• Front Panel/ Button Instruction
FW279S Feelworld master图纸
20181207

4 5
PRODUCT DESCRIPTIONPRODUCT DESCRIPTION
①SDI-IN: SDI signal input (Optional) (Note: No SDI version
does not have this interface)
②SDI-OUT: SDI signal output (Optional) (Note: No SDI version
does not have this interface)
FW279S Feelworld master图纸
20181207
Button Function when OSD is not
displayed Function when OSD is displayed
F1 Custom button 1 /
F2 Custom button 2 /
Volume reduction
Decrease or adjust value of
selected parameter
Volume increase
Increase or adjust value of
selected parameter
MENU Display OSD main menu Return to previous OSD menu
/ Select next menu item
Signal input selection (SDI
Version) Select previous menu item
Power On/Off
Note: No SDI version, no Mode mark. No SDI model does not
have the function of switching signals.
• Rear Panel Instruction

6 7
PRODUCT DESCRIPTIONPRODUCT DESCRIPTION
• Battery Plate
③HDMI-OUT: HDMI signal output
④HDMI-IN: HDMI signal input
⑤F970 battery plate (Standard)
⑥DC power input interface
⑦: Earphone output port
⑧USB upgrade port
Battery Plate Model Picture Battery Camera Model
F970 for
Sony DV
F970 F960 F950 F930
F770 F750 F730 F570
F550 F530 QM91D QM91
QM90D QM90 QM71D
QM71 QM70D QM70
QM51D QM51 FM71
FM70 series
LP-E6 for
Canon DV
LP-E6
There is a battery plate installed on the back of the monitor,
you can assemble the corresponding battery to power the
monitor. There are many different battery plates. Customers
can choose the suitable battery plate according to the battery.

8 9
PRODUCT DESCRIPTION
Remark: Different specications of the battery result in different
capability and working time. Please remove the battery from
the monitor if you don’t use it for a long time.
Battery Plate Model Picture Battery Camera Model
D28S for
Panasonic DV
D55 554S D54SE D40
D35 D33 D32 D28 D25
D22 series
U60 For Sony
DV
BP-U30/U60/U90,
Chinese version U62/U65/
U66/U95/U98 series
CAUTION: RISK OF EXPLOSION IF AN INCORRECT
BATTERY IS REPLACED. PLEASE DISPOSE USED BATTERIES
ACCORDING TO INSTRUCTIONS.
• Press “MENU” button to enter OSD main menu, and press “ ”
or “ ” button to go through the secondary menu function.
• Then press “F1/ ” button to enter secondary menu. Press
“F1/ ” or “F2/ ” button to move cursor and select the items
in the secondary menu.
• After select the items in the secondary menu, press “ ” or
“ ” button to adjust the item parameters.
• Press “MENU” button to conrm the item adjustment and exit
the menu.
Menu Operation Instruction
After correctly connect to the power supply, the indicator will
turn (Red), press to turn on monitor power, the indicator will
be Yellow, and then input HDMI signals, the indicator will turn
Green from Yellow.
MENU OPERATION INSTRUCTION

10 11
MENU FUNCTION INSTRUCTION MENU FUNCTION INSTRUCTION
Setting
Language
English, 简体中文 , Español, Português,
Français, Nederlands, Deutsch, 日本語 ,
繁體中文
Aspect Ratio Just Scan, Panorama, Auto., 4:3, 16:9, P2P
No Signal White Screen, Blue Screen, Red Screen,
Green Screen, Black Screen
OSD Trans. Off, Low, Middle, High
OSD H 0~100
OSD V 0~100
OSD Time Off, 10Sec, 20Sec, 30Sec
Backlight 0~100
Power On Auto., Manual
USB Upgrade Copy the le to the U disk, connect the
USB cable, press “ ” button to conrm
Reset Press “ ” button to conrm, back to
original setting
• Setting
Menu Function Instruction
Image
Pic. Mode Standard, Mild, User, Dynamic
Brightness 0~100
Contrast 10~100
Saturation 0~100
Sharpness 0~100
Color Temp 6500, 9300, User
Tint 0~100
• Image

12 13
Zoom
Nine Grid Zoom Off, On
Zoom Off, 4X, 9X, 16X
Zoom Mode Off, Mode1, Mode2
Scan Mode Under Scan, Over Scan
• Zoom
• Function
Function
Center Marker Off, On
Safe Frames Off, 80%, 85%, 90%, 93%, 96%, 2.35:1
Nine Grid
Off, On
Image Freeze Off, On
Image Flip Off, H_V Flip, H Flip, V Flip
OSD Flip
Off, On
Function
Anamorphic Off, 1.3X, 2.0X, 2.0X MAG, User
Anamorphic nX 1.20X~2.00X
Check Field Off, Mono, Red, Green, Blue
Histogram Off, On
False Colors Off, On
Focus Assist Off, On
Peaking Color Red, Green, Blue
Over Exposure Off, On
Exposure Lever 1～100 IRE
Embedded Audio Off, On
Ratio Marker Off, 4:3, 13:9, 14:9, 15:9, 16:9, 1.85:1,
2.35:1
Mark Color Red, Green, Blue, Black, White
Mark Width 1～7
Modied Mark 0～6
MENU FUNCTION INSTRUCTION MENU FUNCTION INSTRUCTION

14 15
TECHNICAL PARAMETERS
For example: When in OSD menu “ F ”, press “ ” button to
select F1, and press “ ” or “ ”button to pop-up function
items and and press “MODE/ ” or “ ” button to select one
of them, such as “Focus Assist”, and press “MENU” button
to conrm. So when you exit OSD menu, you could press F1
directly in the front of panel to turn on “Focus Assist” function.
You could press “ ” button to set F2 in the same way.
• Custom Button Setting F1~F2
★F1/ F2: Center Marker, Safe Frames, Check Field, Focus
Assist, Aspect Ratio, Image Flip, Image Freeze, Histogram,
False Colors, Over Exposure, Embedded Audio, Nine Grid,
Zoom, Anamorphic.
To set the 3 shortcut custom button F1, F2 on the panel.
Panel Size 7" IPS
Resolution 1920x1200 pixels
Dot Pitch 0.07875 (W) x 0.07875 (H) mm
Aspect Ratio 16:10
Brightness 2200cd/m2
Contrast 1500:1
Viewing Angle 178° H/178° V
Backlight LED
Input SDI (Optional), HDMI
Output SDI (Optional), HDMI
Audio 3.5mm Stereo Headphone
Technical Parameters
MENU FUNCTION INSTRUCTION

16 17
SDI Support Format
480i/576i
720p (60/59.94/50/30/29/25/24/23.98)
1080i (60/59.94/50)
1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/
23.98sF)
HDMI Support Format
480i/576i/480p/576p
720p (60/59.94/50/30/29/25/24/23.98)
1080i (60/59.94/50)
1080p (60/59.94/50/30/29.97/25/24/24sF/23.98/
23.98sF)
4K UHD 3840×2160p (30/29.97/25/24/23.98 Hz)
4096×2160p (24Hz)
Input Voltage DC7~24V
Power Consumption ≦ 18W
Battery Plate F970/ LP-E6 Dual-purpose Battery Plate
Install Way 1/4 ～20 mount points (bottom)
Working Tem. - 20℃～ 55℃
Storage Tem. - 30℃～ 65℃
Unit Size 185Lx120Hx25D (mm)
Unit Weight 365g/395g (With F970 Battery Plate)
•Only black and white or monochrome picture
①please check saturation, brightness & contrast adjustment.
②Please check "Check Field" is in black, white or monochrome
image or other condition.
• No Image after put on the power
①Check if signal cable connecting is in good condition, and if
monitor is synchronized with the input signal.
② Check signal cable connecting, and make sure to use the
standard adapter to connect the monitor. If power is supplied
by battery, please check if the battery is fully charged.
• No sound
① Check if Volume control does not open, try to increase the
volume.
② Check the signal input source is normal or not.
Trouble Shooting
TECHNICAL PARAMETERS TROUBLE SHOOTING

18 19
TROUBLE SHOOTING
■If there are still other problems, please contact with our
related technologists.
★As we are improving product features and product
performance, specications are subject to change without prior
notice.

20