Feli NBM-100 User manual

Feli healthy nut grinders have very special features. They feature multiple usages, fast
grinding speed and big productivity. The professional R&D team designed the grinders with
several patented structures. The high horse power motor allows the machine to grind nuts in a
low temperature, which avoids nut paste deterioration under high temperatures. The premium
efficiency motor remains its stability after a long operation. In addition, the auto turn-off
device ensures the safety of the grinder.
The lead-free copper grinding discs grind nuts in a low temperature. Besides, the grinder
does not require any oil or additives during the grinding process. By adding washers, it is
possible to adjust the fineness of the paste. With Feli grinders, it is easy to produce fresh
and natural taste of nut paste. Feli healthy nut grinders keep away preservatives, emulsifier
and other chemical additives. They produce 100% natural, fresh, original and healthy paste.
It is easy to dismantle the grinder for wash. The grinder makes almost no ingredient loss
on making paste. It requires only 5 minutes cleaning the disassembled parts with a toothbrush
and water. It is easy and fast to clean the grinder. Feli grinders help you work efficiently and
save your time.
Applicable on sorts of roasted nuts, that are contained with oiliness, such as peanuts,
sesames, cashews, almonds, pine seeds, macadamias, walnuts, pumpkins seeds, sunflower seeds,
cocoa beans, miso, fillings, dried fruits, soybeans…and more.

Consume a variety of paste in different ways: eat directly, spread
on bread, healthy seasoning for noodles, salad dressing, soup
dressing, BBQ sauce, add flavor to ice cream, coffee, milk or
soybean milk. You can also make pastries with different paste.

I. Introduction：
1PETG Hopper
2Hopper support
3Front cap securing knob
4Black front cap
5Outlet lid
6Helical rod lock
7Hopper support securing
knobs
8ON/OFF power indicator
9ON/OFF power switch
10 Overcurrent protection
button
11 Power plug & cord
12Fixed disc
13Rotating disc
14Wrench for rotating disc
15Washer (1.2.3mm)
16Rolling pin
Front Side
Back Side

II. Operating Procedure：
Step one：Plug in the power cord and switch on the power. The power indicator
lightens up and the motor starts functioning.
Step two：Pour in gradually roasted nuts into the hopper and the machine starts
to grind.
Step three：After grinding, switch off the power and plug out the cord.
※To prevent over-heating the motor, please SWITCH OFF the grinder after
finishing grinding.

III. Adjusting Grinding Fineness：
Loosen the front cap securing knob.
Remove the black front cap.
Push up the helical rod lock and hold it while turning the
rotating disc anti-clockwise, with the given wrench, until
you hear a “click”. Then, turn the rotating disc
anti-clockwise to remove it.
Choose the right washer and put it on the auger thread
before installing the rotating disc. There are 3 washers to
choose according to the fineness level required:
A. finest level no washer added
B. medium level put the 1mm thickness washer
C. thick level put the 2mm thickness washer
D. extra thick level put the 3mm thickness washer
Put the grinding disc on the auger. Turning the rotating
disc clockwise to assemble it. Put on the Front Cap and
tighten the securing knob on the front cap.
Loosen
Tighten

IV. Cleaning Process：
Switch off the power.
Loosen the front cap securing knob.
Remove the black front cap.
Push up the helical rod lock and hold it while turning the
rotating disc anticlockwise, with the given wrench, until
hearing a “click. Then, turn the rotating disc anticlockwise
to remove it.
Loosen the hopper support
securing knobs. Remove the
hopper support. Disassemble
and clean them with a
toothbrush. The usage of
detergent is not necessary.
Do not disassemble the auger. Clean it with a wet
towel or bring a toothbrush and clean water to brush
it. Do not bring the machine under water to avoid
water penetrating the motor.
Assemble them in reverse order. If there is any friction sound when the grinding disc
is rotating, the hopper support may not be installed well.

V. Notice：
1. The grinder can be customized with the voltage of 110V or 220V, with the frequency of
60/50 Hz. Please use an independent socket instead of a multi-plug socket to avoid
un-stabilized voltage, which will cause the motor out of order. .
2. Turn on the machine before pouring roasted nuts into the hopper. If users pour into nuts
before the auger functions, it may cause the auger stuck with the nuts. Users should turn
off immediately the power and disassemble the parts for cleaning.
3. The lack of oiliness contained in the nuts and unroasted nuts are the main causes of lower
butter fluidity, which can cause the motor stuck. If the motor is stuck, turn off
immediately the power and dismantle the parts following the suggested steps for cleaning.
4. If the motor was over-heated, the Auto Turn-off Safety Device would be activated to turn
off the machine. After the grinder cools down, turn on the power and the grinder would
work normally.
5. If the auger and the grinding discs were stuck with ingredients, the Over-Current Safety
black button located on the back of the grinder would pop out automatically. Please switch
off the power and pull out the plug. Dismantle the parts for cleaning. After cleaning, press
the Over-Current Safety Device black button located on the back of the grinder. Once the
power is on, the grinder would be working normally.
6. Please shred nuts that are in big size (almond, walnut, cashew, etc.) or press the nuts in the
hopper with the given wooden rod while grinding.
7. It is not suitable to grind ingredients that do not contain oiliness (like rice) or that are rich
in liquid (like watermelon) or contains lots of fiber (like old ginger).
8. If the power cord was damaged, contact the supplier or the distributor for a dedicated
cord.
9. In the case when the fineness of the paste gets thicker, the butter contains less oil or the
front cap gets hotter than before, check the condition of the grinding discs with the given
Grinding Disc Diagnostics document.
10. During the operating of the grinder, do not touch the auger with fingers or hard tools, but
only with the given wooden rod.
11. To avoid water seeping into the motor, do not splash water on the machine and do not pour
water or oil into the hopper.
12. To avoid scratches on the machine during transportations, a transparent film is sticked on
the machine shell for shipments. Users should remove the transparent film before turning
on the machine for the first time. The exhausting holes on the machine shell should be
un-covered while the machine is in operation.
13. Before turning on the machine, tighten the funnel securing knobs, because the loosen
funnel securing knobs would make an abnormal loud noise.
14. Users should never dismantle the auger. The installation of the auger defines the

functioning and the quality of the grinder. The proper installation of the auger requires
specialists.
15. To dismantle the grinding disc, users should use one hand to push up the helical rod lock and
use the other hand to turn anticlockwise the grinding disc with a given wrench. When the
grinding disc has been loosen up, put down the wrench, and turn out anticlockwise the
grinding disc.
16. Each of the given 3 washers is with a different thickness. Users need to assemble the
washer only when they want to grind butter with thickness. Before assembling the grinding
disc, they put on a washer according to the thickness of the output butter they wish to
make. Do not assemble more than 1 washer at a time
VI. Contact Information
FELI Technology co., Ltd.
Tel：[phone] Fax：[phone]
Official URL：www.felilook.com
Email：[e-mail]
Address: 6F, No.423, Sec. 3, Mingzhi Rd. , Taishan Dist., New Taipei City 24355, Taiwan (R.O.C.)
Instruction of
dismantling
Feli Website
Fan page
Line@