Fender '64 Custom Deluxe Reverb User manual

OWNER’S MANUAL | MANUAL DE INSTRUCCIONES
MODE D’EMPLOI | MANUAL DO PROPRIETÁRIO
MANUALE UTENTE | BEDIENUNGSHANDBUCH
オ ー ナ ー ズ・マ ニ ュ ア ル | 用户手册

ENGLISH
’64 Custom Deluxe Reverb®-Amp
Terric for any kind of music, Fender’s Deluxe Reverb-Amp is simply
one of the most versatile and beloved guitar ampliers of all time. It
delivers quintessential Fender tonal response, reverb and tremolo;
and it is the perfect size for guitarists who want a moderately
powered amp for any stage or studio situation. And in the modern
pedalboard era, it is the perfect platform for tone building.
Highly collectable 1960s models bring big money on the vintage
gear market. These originals, as well as long-running Fender reissue
models, are used every day on every stage and in every venue
worldwide. Hand-wired in Corona, California, the 20-watt ’64 Custom
Deluxe Reverb-Amp joins this prestigious group with custom channel
modications, new parts and more. Premium features include:
• Hand-wired modied AB763 circuit with normal and bright
channels, each with tube-driven spring reverb and tremolo
• Fender Vintage Blue tone capacitors
• Four 12AX7 and two 12AT7 preamp tubes
• 5AR4/GZ34 rectier tube
• Matched pair of 6V6 power tubes
• 20 watts output power
• 12” Jensen® C-12Q speaker for warm clean tones and moderate
breakup
• Solid pine cabinet for resonance and lighter weight
• Extra-heavy textured vinyl covering
• Lightly aged silver grille cloth
• Footswitch and amp cover
Control Panel
A. NORMAL CHANNEL INPUTS: Connect instruments here. These
two inputs provide sweetened vintage frequency response as
per the popular “bright cap removal” modication. Normal input
1 produces full sensitivity; Normal input 2 has lower sensitivity
(-6dB) for cleaner response with high-output and pre-amplied
instruments.
B. NORMAL CHANNEL VOLUME: Controls volume level of the
normal channel.
C. NORMAL CHANNEL TREBLE AND BASS:Controls respective high-
frequency and low-frequency signal levels of the normal channel.
D. BRIGHT CHANNEL INPUTS:Connect instruments here. These
two inputs access traditional 1960s “Black Panel” tone circuitry,
which accentuates high-mid and treble frequencies. Bright input
1 produces full sensitivity; Bright input 2 has lower sensitivity
(-6dB) for cleaner response with high-output and pre-amplied
instruments.
E. BRIGHT CHANNEL VOLUME:Controls volume level of the
bright channel.
F. BRIGHT CHANNEL TREBLE AND BASS:Controls respective high-
frequency and low-frequency signal levels of the bright channel.
G. REVERB:Controls reverb eect level. No reverb eect is heard
when this control is turned fully counterclockwise. Reverb
can also be turned on and o using the included two-button
footswitch.
H. SPEED:Controls rate of the tremolo eect. The included
footswitch must be plugged in for the tremolo eect to function.
I. INTENSITY:Controls depth of the tremolo eect. No
tremolo eect is heard when this control is turned fully
counterclockwise. As noted above in item “H,” the included
footswitch must be plugged in for the tremolo eect to function.
J. POWER JEWEL:Illuminates while amplier is on.
NORMAL
1 2
BRIGHT
1 2
VOLUME TREBLE BASS VOLUME TREBLE BASS REVERB SPEED INTENSITY
’64 CUSTOM HAND-WIRED
®
Register your ’64 Custom Deluxe Reverb-Amp online at start.fender.com.
1

ENGLISH
Specifications
TYPE PR 4826
POWER Requirements: 100 watts Output: 20 watts RMS into 8Ω @ 10%THD, 1kHz
INPUT IMPEDANCE 1 MΩ (Normal input 1, Bright input 1) 136 kΩ (Normal input 2, Bright input 2)
OUTPUT IMPEDANCE 8Ω (internal and external speaker jacks combined)
SPEAKER One 12” Jensen® C-12Q (8Ω, PN 7710781000)
TUBES One pair 6V6 (power, PN 0069673300) Four 12AX7 (preamp, PN 0074287400)
Two 12AT7 (preamp, PN 0078799200) One 5AR4 (rectifier, PN 0041400000)
FUSE F2A L 250V (100V-120V models) F1A L 250V (220V-240V models)
ACCESSORIES Deluxe fitted cover (included, PN 7710649000) Two-button footswitch (included, PN 7711022000)
DIMENSIONS Width: 24.3” (61.7 cm) Height: 16.9” (42.9 cm) Depth: 9.3” (23.6 cm)
WEIGHT 38.2 lbs. (17.3 kg)
Product specifications subject to change without notice.
Rear Panel
K. FUSE: Provides electrical overcurrent protection. The mains fuse
is not user accessible and should only be replaced by qualied
service personnel.
L. POWER: Turns the amplier on and o.
M. STANDBY: Disables speaker output while power is on. To extend
tube life, leave switch in STANDBY position for rst 60 seconds
after turning POWER (L) on. Instead of turning amp o during short
breaks, set switch to STANDBY position to further extend tube life
and to avoid tube-warmup delay when resuming play.
N. INTERNAL SPEAKER: Jack for internal 8-ohm speaker. If connect-
ing a dierent speaker to this jack, it should have an impedance of
8 ohms when this is the only jack in use.
O. EXTERNAL SPEAKER: Jack to allow use of multiple speakers;
wired in parallel with INTERNAL SPEAKER jack (N) and aecting
total impedance. External speaker jack does not function when
INTERNAL SPEAKER jack (N) is disconnected.
P. FOOTSWITCH: Connect the included two-button footswitch
here. The footswitch must be connected for the amp’s tremolo
eect to function.
Q. REVERB OUTPUT/INPUT:RCA jacks connecting output/input of
reverb pan located on the oor inside the cabinet.
For questions and troubleshooting,
contact a Fender specialist at:
1-800-856-9801 (U.S. toll free)
1-480-596-7195 (International)
SERIAL NUMBER
POWER
ON
STANDBY
ON
EXT.
SPKR.
REVERB
OUTPUT
REVERB
INPUT
FOOT
SWITCH
A product of:
FENDER MUSICAL INSTRUMENTS CORP., 311 CESSNA CIRCLE CORONA, CA 92880 U.S.A.
MODEL: ’64 CUSTOM
DELUXE REVERB
®
-AMP
F2A L
250V
FUSE INT.
SPKR.
PARALLEL
SPEAKER
JACKS
20 WATTS
8Ω MIN
TOTAL
INPUT POWER
100W
120V 60Hz
TYPE: PR4826
WARNING:
TO REDUCE
THE RISK OF FIRE OR ELECTRIC
SHOCK DO NOT EXPOSE THIS
EQUIPMENT TO RAIN OR
MOISTURE
AVERTISSEMENT:
RISQUE DE CHOC ELECTRIQUE !
NE PAS OUVRIR !
フェンダー·
ミュージック(株)
WARNING:
MAINTAIN 6" CLEARANCE FOR VENTILATION.
CAUTION:
CHASSIS SURFACE HOT
ATTENTION: SUPERFICIE DE
CHASSIS CHAUDE
ATTENTION: UTILISER UN FUSIBLE
DE RECHANGE DE MEME TYPE ET CALIBRE
CAUTION: TO REDUCE THE RISK OF
FIRE, REPLACE FUSE WITH SAME TYPE AND
RATING
WARNING: FENDER AMPLIFIER SYSTEMS
ARE CAPABLE OF PRODUCING VERY HIGH
SOUND PRESSURE LEVELS WHICH MAY
CAUSE TEMPORARY OR PERMANENT
HEARING DAMAGE. USE CARE WHEN
SETTING AND ADJUSTING VOLUME LEVELS
DURING USE.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK,
DONOTREMOVEBACKCOVER.
NOUSER
SERVICEABLE PARTS INSIDE, REFER
SERVICING TO QUALIFIED PERSONNEL ONLY.
2