Feniex C-1020 User manual

MANUAL
This instruction manual serves as a
guide for the Feniex Haleo Switch Series.
IMPORTANT! Please read through all
provided instructions and any listed
warnings in regards to product use.
Haleo Model #: C-1020,C-1040,C-1060
Record Product Serial Number:

Safety Regulations
The following provides all the information
necessary to safely operate the previously
listed products of Feniex Industries, Inc.
Please read this manual thoroughly before
installing or operating your new product
in order to prevent any damage or injury.
Failure to follow the listed instructions in
the manual may result in damage to your
products or personal injury.
• Proper installation of this product requires
good knowledge of automotive systems,
electronics and procedures.
• Please guarantee all vital components
of the vehicle are not in danger of being
damaged by drilling holes necessary
for installation. Check all sides of the
mounting surface before drilling any holes
into the vehicle.
• Do not install this product in any way
that interferes with the deployment of
the air bag. Doing so may damage the
effectiveness of the air bag and can lead
to serious personal and vehicle injury. The
installer will assume full responsibility of
proper installation of the new unit.
• Please clean the mounting surface before
installation of the unit when using tape,
brackets, magnet, Velcro or suction cups.
• The product ground wire must be
connected directly to the Negative (-)
battery post for effective use of the
unit. Please follow all wiring guidelines
provided to guarantee long lifespan
and productivity. Failing to follow these
instructions may result in damage to the
product.
Warranty
Feniex Industries, Inc. warrants to the original
purchaser that the product shall be free from
defects in material and workmanship for sixty
(60) months from the date of purchase for all
LED products. Feniex Industries warranties
speakers, sirens and controllers for 24
months;switchesandashersfor12months.
If a warranty problem occurs, please contact
customersupportat1.800.615.8350or
visit the web site at www.Feniex.com. If the
product needs to be returned for repair or
replacement, call our customer support line
to receive a return merchandise authorization
number.Operationaltimesarefrom10a.m.
to5p.m.centraltime,Mondaythrough
Friday. Please do not send in product without
contactingsupportrstforaRMAnumber.
Service After Expiration
Feniex Industries will still provide service for
all products after expiration of the warranty.
For any issues, call the customer support
line. In some instances it may be necessary
for the product to be shipped, freight prepaid
and insured for loss or damage to Feniex
headquarters.
Copyright
This instruction manual and the Feniex
products described in this instruction
manual may include or describe copyrighted
Feniex material. Laws in the United States
and other countries preserve for Feniex
Industries and its licensors certain exclusive
rights for copyrighted material, including the
exclusive right to copy, reproduce in any
form, distribute and make derivative works
ofthecopyrightedmaterial.Accordingly,
any copyrighted material of Feniex and its
licensors contained herein or in the Feniex
products described in this instruction manual
may not be copied, reproduced, distributed,
mergedormodiedinanymannerwithout
the express written permission of Feniex
Industries, Inc.
Feniex Product Copyrights
The products described in this document
are the property of Feniex Industries, Inc. It is
furnished by express license agreement only
and may be used only in accordance with the
terms of such an agreement. Products and
documentation are copyrighted materials.
Makingunauthorizedcopiesisprohibitedby
law. No part of the product or documentation
may be reproduced, transmitted, transcribed,
stored in retrieval system or translated into any
language or computer language, in any form or
by any means, without prior permission from
Feniex Industries, Inc.
2| Haleo Switch Series

3| Haleo Switch Series
www.feniex.comwww.feniex.com
Mounting Instructions:
See Figure 1.0 for instructions on
exchanging a switch in the panel frame.
1.)Selecttheswitchtoberemoved
from the panel.
2.)Toremovetheswitch,rmlypress
the back of the switch from each side
and push it outwards from the switch
panel.
3.)Pushinthenewswitchfromthefront
of the panel and snap it into the frame.
3.)Drilltwo,0.125”mountingholeson
the mounting surface making sure no
vital components of the surface are
damaged.
4.)Makesuretode-burrtheholes
thoroughly.
5.)Usingcustomerprovidedscrews,
secure the Haleo switch panel to the
mounting surface.
SPECIFICATIONS:
LED back lit switches
Lightweight, durable aluminum frame
Option between black momentary switch or red on/off switch
mounting surfacegure 1.1
Screw
Hole
gure 1.0
Switch
Haleo
Bracket
Mounting Instructions:
See Figure 1.1 for mounting details
1.)Placetheunitagainsttheintendedmountingsurface.
2.)Marktheareaswherethemountingholeswillbedrilled.Ifthemountingsurface
is part of the vehicle, make sure no vital components could be damaged by the
drilling process.

4| Haleo Switch Series
www.feniex.comwww.feniex.com
Wiring Instructions:
See illustration for wiring details for red,
on/off switch. See Figure 2.0.
1.)Therearoftheon/offswitchhas3
exiting ports.
2.) Using the provided wire, extend the
topporttothe12Vpostofthevehicle’s
battery.
3.)Usingtheprovidedwire,extendthe
bottom port to the ground post of the
vehicle’sbattery.
4.) Connect the middle post using the
provided wire to the the (+) wire of the
desired product.
5.)Multipleproductsmaybeconnected
to the middle post of a switch. Each
switch is rated at 20 amps.
Wiring Instructions:
See illustration for wiring details for
black, momentary switch.
See Figure 2.1
1.)Therearofthemomentaryswitch
has only 2 exiting ports.
BATTERY
PRODUCT
gure 2.1
gure 2.0
PRODUCT
CAN BE CONNECTED
TO 12V(+) OR 12V(-)
DEPENDING ON
PRODUCT
BATTERY
2.)Usingtheprovidedwire,extendoneporttothe12V(+)or12V(-)postofthe
vehicle’sbatterydependingontheproduct’sashpatternchangeractivation.
3.)Connecttheotherporttotheashpatternchangerwireofthedesiredproduct.
ON/Off Switch vs. Momentary Switch
ON/OFF Switch Momentary Switch
Ground
Accessory
Positive
Input
Voltage
Output
Voltage
Red Black