Ferm PEKA User manual

PEKA BENCH
ASSEMBLY MANUAL
fermliving.com

NEEDED FOR ASSEMBLING
Two people
1 x screwdriver in size PZ2
A rug/towel to protect
the bench when placing it
on the ground
2. Place the two legs upright. Attach the backrest using
both of set screws and both of the machine screws.
1. Mount the two bolts onto the underside of the
backrest’s shelf.
3. Attach seat - Part A using two of the long
wooden screws.
6. The Peka Bench is now ready for use.
4. Attach seat - Part B using two of the long wooden
screws. Make sure to match up the protruding dowels
with the indentations in seat – Part B.
5. Spread out a rug/towel on the ground to protect the
bench. Then, carefully place the Peka Bench on its back.
Attach all seven of the small wooden screws into the
corresponding holes on the underside of the seat.
2.
1.
3.
5. 6.
4.
4 x long wooden screws
2 x set screws
1 x Hex key
2 x machine screws
7 x small wooden screws
2 x legs
1 x backrest with shelf
1 x seat Part A
1 x seat Part B
2 x bolts