Ferm LITTLE ARCHITECT BENCH User manual

LITTLE ARCHITECT
KIDS FURNITURE
ASSEMBLY MANUAL

2
Needed for assembling
One person Screwdriver
Content
1 x bench seat
2 x legs
1 x crossbar
LITTLE ARCHITECT BENCH
8 x cap screws 2 x minifix
1 x hex key
Hex key

3
Assembling
1. Place one leg on the floor with screw holes pointing
upwards. Choose a soft, flat area to avoid scratching
the furniture
2. Mount bench seat to the leg using the cap screws.
Tighten with hex key.
3. Mount crossbar to the leg
using the minifix. Tighten with
a screwdriver.
4. Put one minifix in the hole of the second leg
5. Attach the second leg to the bench seat and crossbar
with the minifix and cap screws
6. Mount with cap screws and tighten with hex key.
Tighten minifix with screwdriver.
1-2 3
4-6

4
1 x hex key
Content
1 x tabletop
2 x legs
1 x crossbar
LITTLE ARCHITECT TABLE
8 x cap screws
2 x minifix

5
Assembling
1. Place one leg on the floor with screw holes pointing
upwards. Choose a soft, flat area to avoid scratching
the furniture
2. Mount tabletop to the leg using 4 cap screws.
Tighten with hex key.
3. Mount crossbar to the leg using
the minifix. Tighten with
a screwdriver.
4. Put minifix in the screw hole of the other leg
5. Attach the second leg to the tabletop and crossbar
with the minifix and cap screws
6. Tighten with hex key and screwdriver
1-2 3
4-6

6
Content
1 x tabletop
1 x backside frame2 x legs
LITTLE ARCHITECT DESK
8 x cap screw 4 x minifix
1 x hex key

7
Assembling
1. Place one leg on the floor with screw holes
pointing upwards. Choose a soft, flat area to
avoid scratching the furniture
2. Mount tabletop to the leg using 4 cap screws.
Tighten with hex key.
3. Attach the second leg to the tabletop
and tighten with hex key
4. Put minifixes in the two holes on the backside frame
and mount with the legs and tabletop
5. Tighten with screwdriver
1-2 3
4-5

fermliving.com