OSP furniture DESIGNlab AR1337 User manual

© Ofce Star Products December 2022
OSP FURNITURE LIMITED PRODUCT WARRANTY
Design Lab Products
• 3 years on gaming desks and chairs
• Upholstery is not warranted against routine scratching and scufng
*All warranties are limited to the original purchaser for normal commercial usage dened as a standard forty hour work week by persons weighing 250 lbs. or less.
This warranty will not cover labor, freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event
beyond the control of Ofce Star Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential
damages is excluded. The user assumes all risk of injury resulting from use of this product. When usage is more than 40 hours per week, a two year warranty on
all parts applies. Fabric and foam is warranted for one year. This warranty gives you specic legal rights, and you may also have other rights which vary from state
to state.
It is the customer’s responsibility to prepay freight on any components returned to the factory. Return freight on components covered by warranty will be paid by
Ofce Star Products.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts are damaged or missing. Our
Parts Department will do everything possible to promptly remedy the problem. Contact us via e-mail parts.department@ofcestar.net by Fax [phone], or
toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m. - 3:30 p.m. Pacic Time.
WARNING
1. Do not use this product unless all bolts, screws and knobs are
securely tightened.
2. Check that all bolts, screws and knobs are tight every three
months or as needed.
3. Dispose of packing material properly. Do not use plastic cover as
head covering. It may cause suffocation.
4. Do not use product as stepladder.
5. Use product for its intended purpose only.
6. Use mild detergent only for cleaning.
AR1337
ELECTRIC LIFT GAMING DESK
ASSEMBLY INSTRUCTIONS

(7) Bracket (1 PC)
(9) Plastic Bracket (1 PC)
(11) Bluetooth LED Light Adapter (1 PC)
(13) Adapter (1 PC)
(15) Switch Cord (1 PC)
(8) USB Power (1 PC)
(10) Bluetooth LED Light Cable (1 PC)
(12) USB Power Adapter (1 PC)
(14) Power Plug (1 PC)
PARTS
DRAWING DESCRIPTION SIZE QUANTITY
HARDWARE LIST
Phillips screwdriver also needed for assembly (not provided)
NO
n/a
n/a
n/a
4 x 4
4 x 4
11 PCS
2 PCS
15 PCS
1 PC
1 PC
Phillips Bolt
Cable Tie
Allen Bolt
Allen Wrench
Long Allen Wrench
A
B
C
D
E
(1) Desk Top (1 PC)
(3) Foot (2 PCS)
(5) Handset + Screws (1 PC)
(2) Lifting Column (2 PCS)
(4) Headphone Hanger (2 PCS)
(6) Bluetooth LED Light (1 PC)
PARTS

STEP 1
STEP 2
3
3
C
C
22
2
2
C
C
1
3
3
C
C
22
2
2
C
C
1
STEP 3
STEP 4
1
5
1
4
4
A
A
1
5
1
4
4
A
A
STEP 3 Attach Handset (5) to underside of Desk Top (1) using provided screws. FULLY TIGHTEN SCREWS USING PHILLIPS SCREWDRIVER (NOT PROVIDED).
STEP 4 Attach Headphone Hangers (4) to sides of underside of Desk Top (1) using two Phillips Bolts (A) for each Headphone Hanger (4). FULLY TIGHTEN ALL
PHILLIPS BOLTS (A) USING PHILLIPS SCREWDRIVER (NOT PROVIDED).
AR1337
ELECTRIC LIFT GAMING DESK
ASSEMBLY INSTRUCTIONS
AR1337
ELECTRIC LIFT GAMING DESK
ASSEMBLY INSTRUCTIONS
Remove all parts from carton, separate by part numbers indicated on parts list, and verify part quantities.
STEP 1 Attach one Foot (3) to each Lifting Column (2) using Allen Bolts (C) for each Foot (3). FULLY TIGHTEN ALL ALLEN
BOLTS (C) USING ALLEN WRENCH (D or E).
STEP 2 Attach Lifting Columns (2) to underside of Desk Top (1) using four Allen Bolts (C) for each Lifting Column (2). FULLY TIGHTEN ALL ALLEN
BOLTS (C) USING ALLEN WRENCH (D or E).

STEP 5
STEP 6
A
9
7
1
x3
C
x1
A
9
7
1
x3
C
x1
STEP 7
A
6
1
AR1337
ELECTRIC LIFT GAMING DESK
ASSEMBLY INSTRUCTIONS
AR1337
ELECTRIC LIFT GAMING DESK
ASSEMBLY INSTRUCTIONS
STEP 7 Attach Bluetooth LED Light (6) to rear underside edge of Desk Top (1) using three Phillips Bolts (A). FULLY TIGHTEN PHILLIPS BOLTS (A) USING
PHILLIPS SCREWDRIVER (NOT PROVIDED).
STEP 5 Attach Bracket (7) to underside of Desk Top (1) using three Allen Bolts (C). FULLY TIGHTEN ALL ALLEN BOLTS (C) USING ALLEN WRENCH (D or E).
STEP 6 Attach Plastic Bracket (9) to underside of Desk Top (1) using four Phillips Bolts (A). FULLY TIGHTEN ALL PHILLIPS BOLTS (A) USING PHILLIPS
SCREWDRIVER (NOT PROVIDED).

STEP 8: CABLE CONNECTION STEP 9
B
B
B
Use cable ties (B) to manage cables
and prevent damage.
Tear off Fix
Manage
USB power connects magnetically to the metal plate.
motor wire
AR1337
ELECTRIC LIFT GAMING DESK
ASSEMBLY INSTRUCTIONS
AR1337
ELECTRIC LIFT GAMING DESK
ASSEMBLY INSTRUCTIONS
STEP 8 If using a power strip bracket, connect cables as shown below. If not using a power strip bracket, plug each component to a wall outlet.

Up & Down Button
Attention Please make sure that there are no obstructions during the ascending and descending
process of the desk, and all cables are long enough for the desk to go up and down.
Lifting Function:
a. The height of the desk can be adjusted up or down by
pressing "▲" or "▼" button.
b. Long press the "▲" or "▼" button for more than 1.2 seconds
to enter the automatic mode, and then press any button to stop
the process.
(This function is optional, the default software does not have
this function)
Reset Function:
a. At the lowest position, long press the down button for more
than 5 seconds to enter the reset state, until the lifting system
bottoms out and the rebound stops, the reset is successful.
b. When the lifting system fails, release the button and long
press the down button until the lifting system bottoms out and
rebound stops, which means the reset is successful.
Troubleshooting:
a. If there is no response when pressing the up or down button
after a period of continuous work, please rest for more
than 18 minutes before using it.
b. During the lifting process, if there is a retreat phenomenon,
please check whether the desk load is too heavy or whether
the desk shakes greatly.
Handset use and settings
The following tips will help you detect and eliminate the common fault and error. If the fault you met is not listed below, please contact
with your supplier. Only the manufacturer and professionals are capable for investigating and correcting those fault and error.
1. Power supply: AC100V-240V, 50/60Hz
2. Service Environment: 0-40Cº
3. Unplug the power plug before cleaning, wipe the dust on surface with slight wet dishcloth when
cleaning, be careful not to let the drops into the internal parts, not loose the connector.
4. The electric box contains electronic components, metals, plastics, wires etc., so dispose of it in
accordance with each country's environmental legislation, not the general household waste.
5. Check carefully to ensure correct and complete assembly before using.
6. Be familiar with all functions and program settings of the product before first use.
7. Children are forbidden to play on the product because of unforeseen action when playing, so any
dangerous consequences caused by this improper action will not be on manufacturers.
8. Slight noise caused by the V-ribbed belt or brake system due to structure will not have any effect
on the use of the equipment.
9. Corrosive or abrasive materials are forbidden to clean the equipment. Must ensure that the
cleaner used will not pollute the environment.
10. This appliance can be used by children aged from 8 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the appliance in a safe way and understand the
hazards involved. Children shall not play with the appliance.
11. Cleaning and user maintenance shall not be made by children without supervision.
12. If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or a
similarly qualified person in order to avoid a hazard.
13. Please make sure there is no hazard sources in your operating environment. e.g., do not litter
the tools around. Always be careful to treat the packaging materials in order to avoid any possible
danger, e.g. plastic bag may lead to choking hazard to children.
14. Keep the original package of the equipment if necessary in case of the future use in
transportation.
Attention
This marking indicates that this product should
not be disposed with other household wastes.
To prevent possible harm to the environment or
human health from uncontrolled waste disposal,
recycle it responsibly to promote the sustainable
reuse of material resources. To return your used
device, please use the return and collection
systems or contact the retailer where the
product was purchased. They can take this
product for environmental safe recycling.
FAULT & ERROR METHOD
Desktop does not function Check all cables and all connections
Rising at low speed
Check if overloaded
Max load: 50kg
(including monitor arm & head phone hanger)
Desk moves downward without any operation
Automatically self-rests
Lowers but will not raise, or
raises but will not lower
Will not rise to maxium height or
lower to height minimum
Desk does not rise
Reset using reset control function
on handest
Overwork
(Duty cycle: Max 2min on/18min off)
Restart after 18 minutes has suspended
while connected to power

DRAWING DESCRIPTION SIZE QUANTITY
HARDWARE LIST
Phillips screwdriver also needed for assembly (not provided)
NO
8 PCS
8 PCS
3 PCS
2 PCS
16 PCS
1 PC
1 PC
1 PC
n/a
n/a
n/a
n/a
n/a
4 x 4
5 x 5
6 x 6
Phillips Screw
Phillips Screw
Allen Screw
Allen Screw
Flat Washer
Allen Wrench
Allen Wrench
Allen Wrench
A
B
C
D
E
F
G
H
(1) Arm Cap (1 PC)
(3) Fixing Ring (1 PC)
(5) Cable Clip (1 PC)
(7) Clamp (1 PC)
(2) Monitor Arm (1 PC)
(4) Rod (1 PC)
(6) Bracket (1 PC)
(8) Anti-Slip Pad (2 PCS)
(9) Cable Clip (4 PCS) (10) Cover (2 PCS)
(11) Mounting Plate (2 PCS) (12) Allen Wrench (1 PC) (2.5 x 2.5)
PARTS

STEP 1
x2
Dx1 F
4x4
x3
C
Please select the
appropriate mounting
holes according to the
thickness of the table board.
4
6
C
8
7
D
STEP 2
STEP 3
STEP 4
AR1337
MONITOR MOUNT
ASSEMBLY INSTRUCTIONS
AR1337
MONITOR MOUNT
ASSEMBLY INSTRUCTIONS
STEP 3 Attach Cable Clips (9) to Monitor Arm (2). Slide Fixing Ring (3) onto Rod (4) and slide Rod (4) through Monitor Arm (2). SECURE FIXING RING (3) USING
ALLEN WRENCH (12). Cover end of Rod (4) using Arm Cap (1). Cover screw holes on Monitor Arm (2) using two Covers (10).
STEP 4 Depending on your monitor(s), partially screw either two Phillips Screw (A) or Phillips Screws (B) into rear of monitor(s). You may need increase the amount
of washers used to suit the monitor(s) you are mounting. Attach Mounting Plate (11) to rear of monitor(s) using either two Phillips Screw (A) or Phillips Screws (B).
FULLY TIGHTEN PHILLIPS SCREWS (A or B) USING PHILLIPS SCREWDRIVER (not provided).
STEP 1 Attach Rod (4) to Bracket (6) using two Allen Screws (C). Attach Clamp (7) to Bracket (6) using two All Screws (D). FULLY TIGHTEN ALL SCREWS USING
ALLEN WRENCH (F).
STEP 2 Mount assembly to tabletop or desk top. FULLY TIGHTEN KNOBS.
Applicable tabletop thickness: 20-100mm
Tabletop
Tighten
9
9
9
9
1
10
3
4
2
x1
12
2.5x2.5
Before hanging monitors, ensure
the screw is securely tightened.
x8
B
x8
A
EA/B
EA/B
Increase washer (E) count
if necessary.
11

STEP 5
STEP 6
STEP 7 x1
H
6x6
H
10
AR1337
MONITOR MOUNT
ASSEMBLY INSTRUCTIONS
AR1337
MONITOR MOUNT
ASSEMBLY INSTRUCTIONS
x1
F
4x4
11
11
2
-8 5 °~ 1 5°
±180°
±180°
-8 5 °~ 1 5°
x1
G
5x5
To adjust monitor(s) use
the supplied Allen Wrench (G)
Cables
5
G
STEP 5 Carefully slide monitor(s) onto Monitor Arm (2) and fasten using Allen Wrench (F). FULLY TIGHTEN ALL SCREWS USING ALLEN WRENCH (F).
STEP 6 Run cables through cable clips. Attach Cable Clip (5). Adjust monitor(s) use Allen Wrench (G). FULLY TIGHTEN SCREWS. STEP 7 For single monitor use, you can remove one support from Monitor Arm (2). Remove Cover (10) from desired side. Unscrew pre-installed bolt using Allen
Wrench (H) and carefully detach support. Attach monitor mount to desk.