Fetch M616T User manual

Mighty Quick Start Guide

2
What’s inside
Step 1. Unpack the box 4
Activation Code 5
Important Tips 5
Step 2. Connect to your Broadband Modem 6
Step 3 . Connect to your TV Antenna 8
Step 4. Connect to your TV 9
Step 5. Power up your Fetch Mighty 10
Step 6. Start up your Fetch Mighty 11
Fetch Mobile App 12
Remote Control 13
Fetch Mighty 15
Troubleshooting 17
Specifications 19

3
All your entertainment, easy
Welcome to Fetch! Fetch combines Free TV, Catch-Up, premium channels, streaming apps, and movies
all in one place; with Universal Voice Search so it’s easy to find and start watching.
There are 6 easy steps to get you started:
Unpack the box
Connect the Fetch box to your broadband modem
Connect the Fetch box to your TV Antenna
Connect the Fetch box to your TV
Power up your Fetch Mighty
Start up your Fetch Mighty
This guide tells you all you need to know about setting up and turning on your Fetch Mighty. It also has
important safety and usage information.
1
2
3
4
5
6

4
Step 1. Unpack the box
Before you install your Fetch Mighty, check that all the accessories you need have been supplied using this page
as a checklist.
The included remote varies depending on where you got your Fetch Mighty. Information on Fetch remotes is
available at fetch.com.au/remote. The Voice Remote is available for purchase at fetch.com.au/voice.
What’s in the box:
Fetch Mighty
Power Supply HDMI Cable
Remote Control with batteries

5
• Place the Fetch box on a level surface.
• Don’t stack it on anything that vibrates or generates heat.
• Make sure there’s 5cm of space around the Fetch box for airflow.
• The remote control works up to 6m away from the Fetch box in Infrared mode.
The voice remote control works up to 10m away in Bluetooth mode.
• Unplug the Fetch box from the power source before cleaning.
• Clean using a dry cloth only - don’t use water or chemicals.
• Don’t try to open the Fetch box - it’s dangerous and will void your warranty.
• Use only with a 100V-240V 50Hz AC power source.
• Use only the power supply provided.
• Keep liquid, children and pets away from the Fetch box at all times.
• For any problems with your Fetch box, if you have an account directly with Fetch go to
fetch.com.au/account. If you got Fetch from your broadband or phone provider, please contact
them for assistance.
If you got Fetch from your broadband or phone provider, they will have sent you an email and/or SMS
with your Activation Code. Please contact them if you can’t find your Code.
If you got your Fetch box from a retailer or directly from Fetch, go to fetch.com.au/activate to get your
Activation Code. If you already have another Fetch box and account, go to fetch.com.au/account to add
this Mighty to your existing account.
Important Tips
Activation Code

6
Step 2. Connect to your Broadband
Modem
Fetch is delivered by broadband Internet, so you need to connect your Fetch Mighty to the modem.
There are various ways to do this:
To connect, follow these steps:
Option 1: Wi-Fi Connection
Option 2: Wired Connection
Connect your Modem to your Fetch Mighty via Wi-Fi
Use this option if:
• Your modem is not close to your TV, and
• You have reliable Wi-Fi in the room where your TV is.
If you’re using this connection option you can go straight to Step 3. Connect to your TV Antenna on Page 8 now.
You will set your Wi-Fi up later when you get to Step 6. Start up your Fetch Mighty.
Connect your Modem to your Fetch Mighty via Ethernet cable
This is the most reliable connection option. Use this option if:
• You can run an Ethernet cable directly from your Modem to your Fetch Mighty.
Plug one end of an Ethernet cable into a free port on your broadband modem.
Plug the other end into the port labelled INTERNET on the back of your Fetch Mighty.
1
2
3rd Generation Mighty (M616T) 4th Generation Mighty (M681T)

7
Plug one end of an Internet Ethernet cable into a free port on your broadband modem.
Plug the other end into the Internet Ethernet wall socket nearest to your broadband modem.
Plug one end of a second Internet Ethernet cable into the port labelled INTERNET on the back of your
Fetch Mighty.
Plug the other end into the Internet Ethernet wall socket nearest your TV and Fetch Mighty.
1
2
3
4
To connect, follow these steps:
Connect your Modem to your Fetch Mighty using data cabling
Use this option if:
• Your modem is not close to your TV, and
• Your installation location has cabling with an Ethernet port nearby.
Option 3: Data cabling
3rd Generation Mighty (M616T) 4th Generation Mighty (M681T)

8
Plug one end of the existing antenna cable into the antenna wall socket, or leave if already
connected to the wall.
Plug the other end of the antenna cable into the socket labelled Antenna on the back of your
Fetch Mighty.
1
2
Step 3. Connect to your TV Antenna
You get your Free-to-Air Digital TV channels using your normal TV antenna. They are not delivered over broadband Internet.
You’ll need your existing TV antenna cable, so unplug it from the back of your TV.
3rd Generation Mighty (M616T) 4th Generation Mighty (M681T)
Antenna cable is not provided

9
Plug the HDMI cable into the port labelled HDMI on the back of the Fetch Mighty.
Plug the other end into a free HDMI port on your TV.
1
2
Step 4. Connect to your TV
The Fetch Mighty connects to your TV using HDMI (High Definition Multimedia Interface). Only the HDMI cable
is needed.
To watch content in 4K on your Fetch Mighty, you’ll need:
• A connected 4K HDR TV
• A steady home broadband speed of 15-25 Mbps
• Video setting set to Auto (4K – 2160P) on your Fetch Mighty (you can do this later on Fetch at
Menu > Manage > Settings > Audio & Visual > Video)
Your TV and home theatre equipment such as audio video receiver or sound bar if using, also need HDMI
inputs that support 4K and HDMI 2.0/HDCP 2.2 signals. Check your TV manual for more info.
To watch High Dynamic Range (HDR), you’ll need to enable the option on your TV if supported and then
later on your Fetch Mighty at Menu > Audio & Visual > Advanced > HDR Mode. Different TVs may use other
names like “Ultra” or “Deep Colour”.
3rd Generation Mighty (M616T) 4th Generation Mighty (M681T)

10
Once you’ve completed all the steps and put the batteries in your remote control it’s time to turn everything on.
Step 5. Power up your Fetch Mighty
Connect your Fetch Mighty to power Check the Fetch Mighty Connection
Turn on your Fetch Mighty
Turn on the Power at the wall socket. The power light on your
Fetch Mighty will light up.
Standby light is blue when your Fetch Mighty is powered on.
If it is red, the box is in standby mode and you should press
the power button on the remote control to turn it on.
Internet light on your Fetch Mighty is blue when you have a
broadband connection. If it is red, there is no live connection.
During initial start-up it will change from red to blue.
Recording light on your Fetch Mighty will flash when you
press any button on the remote. If it doesn’t flash the box is
not responding to the remote.
Select Source / Input on TV
Plug the red end of the power supply unit into the Fetch Mighty.
Plug the power supply unit into the wall power socket.
Turn on your TV.
On your TV remote press Source/Input or AV Select.
Select the HDMI port you plugged your Fetch Mighty into.
1
1
2
2
3
Note
The back panel of your box may look different to the
diagram but the functionality remains the same
(see Page 16).