Fieldmann FZS 2050-E User manual

EN

EN
L CTRIC STRING TRIMM R US R'S MANUAL
3
able of Contents
Electric string trimmer
USER'S MANUAL
Thank you for purchasing this electric string trimmer. Before you start using it, please,
carefully read this user's manual and save it for possible future use.
TABLE OF CONTENTS
1. GENERAL SAFETY INSTRUCTIONS .......................................................................................................................... 4
2. EXPLANATION OF INSTRUCTION LABELS ON THE POWER TOOL........................................................... 5
3. SAFETY INSTRUCTIONS ................................................................................................................................................ 7
4. DESCRIPTION OF THE POWER TOOL ................................................................................................................... 8
5. ASSEMBLY.......................................................................................................................................................................... 9
6. STARTING THE TRIMMER ........................................................................................................................................... 11
7. CUTTING...........................................................................................................................................................................12
8. MAINTENANCE.............................................................................................................................................................14
9. DISPOSAL ........................................................................................................................................................................15
10. DECLARATION OF CONFORMITY .......................................................................................................................16
11. TECHNICAL SPECIFICATIONS.................................................................................................................................17

EN 4
ZS 2050-E
eneral safety instructions
1. GENERAL SAFETY INSTRUCTIONS
Important safety notice
Carefully unpack the product and take care not to throw away any part of the packaging before you find all
the parts of the product.
Store the product in a dry place out of reach of children.
Read all warnings and instructions. Not following warnings or instructions may lead to injury by electrical
shock, a fire and/or serious injuries.
Packaging
The product is packed in a package that prevents damage during transport. This package is a resource and so
can be handed over for recycling.
Operating instructions
Before you start working with the power tool, read the following safety and usage instructions. Understand the
operating elements and the correct use of the power tool. Keep the user’s manual in a safe place where it can be
easily retrieved for future use. Save the original packaging, including the internal packing material, warranty card
and proof of purchase receipt, at least for the duration of the warranty. If you need to ship this power tool, pack it
in the original cardboard box to ensure maximum protection during shipping or transport (e.g. when moving or
when you need to send this power tool for repair to a service centre).
Note: If you hand over the power tool to somebody else, do so together with this user's manual. Following
the instructions in the included user's manual is a prerequisite for the proper use of the tool. The user's
manual also contains operating, maintenance and repair instructions.
The manufacturer takes no responsibility for accidents or damages resulting from
not following the instructions in this manual.

EN
L CTRIC STRING TRIMM R US R'S MANUAL
5
xplanation of instruction labels on the machine
2. EXPLANATION OF INSTRUCTION LABELS
ON THE MACHINE
Warning!
Read the user's manual before using.
Keep other persons at a sufficient distance away!
Do not use in rain or in wet conditions.
Always wear eye protection.

EN 6
ZS 2050-E
xplanation of instruction labels on the machine
While working use protective gloves.
Use solid insulating work footwear.
Use hearing protection.
In the event that the power cord is damaged,
immediately disconnect it from the power supply.
DANGER! Do not use the power tool if there are
children, other persons or animals in your vicinity.
Be careful not to be hit by deflect objects.

EN
L CTRIC STRING TRIMM R US R'S MANUAL
7
afety Instructions
3. SAFETY INSTRUCTIONS
ATTENTION!
Adhere to safety rules when using this power tool. For your safety and the safety of other people, please
carefully read these instructions before using this power tool. Please store these instructions for possible
future reference.
Wear safety glasses when working with this power tool.
Wear gloves when working with this power tool.
Do not expose this power tool to rain or high moisture/humidity.
Acquaint yourself with the controls and the correct operation of this string trimmer.
Never allow children or other persons not acquainted with these instructions to use this string trimmer.
Prevent children and other persons and pets from approaching this string trimmer as the grass that is
being trimmed and is flying around may contain stones or fragments. If there are other people in the vicinity,
especially children, stop using the string trimmer.
When working with the string trimmer, do not permit other persons or pets to come closer than 15 metres.
Only use the string trimmer during daylight hours or with good artificial lighting.
Prior to using the string trimmer or after any impact, always inspect it for signs of wear or damage, and
repair it if necessary. Do not use the sting strimmer if the cutting tool is not properly secured in place or if it is
damaged.
Always check that the string trimmer is in good working order, if not, it may endanger the user.
Always use protective guards when using the string trimmer.
Do not use the string trimmer if the protective guards are damaged.
Remove from the work area all stones, metal pieces, roots, other hard items and plastic bags, nylon string
and other items that cannot be cut up.
Prior to starting the string trimmer, make sure that the nylon cutting edge is not touching stones or fragments.
Always keep your hands away from the cutting area, especially when starting the motor.
Protect yourself against injury caused by the cutting edge at the length of the trimming line. After spooling on
a new trimming line, always return the string trimmer to its normal operating position before starting it.
Do not use spare parts or accessories not supplied or recommended by the manufacturer.
Always ensure that the ventilation openings are free of fragments.
To prevent accidental start up, do not carry the power tool with a finger on the start/stop trigger.
Maintain a stable and safe stance when working with the string trimmer.
Remove wire, stones and fragments from the area where you will be working.
Do not cut hard items. This could result in injury or damage to the string trimmer.
ATTENTION!
Cutting elements continue to rotate even after the motor is turned off!
Do not attempt to stop the cutting tool (nylon line) using your hands. Always allow it to stop on its own.
This applies also for the metal three tooth blade.
Do not use the string trimmer for cutting grass that is not touching the ground, for example grass on walls
or rock gardens, etc.
Do not pass over sand or gravel paths with the string trimmer still running.

EN 8
ZS 2050-E
escription of the power tool
4. DESCRIPTION OF THE MACHINE
1. Start/stop trigger safety lock
2. Start/stop trigger
3. Handle setting screw
4. Shoulder strap hitch
5. Handle
6. Split shaft coupler
7. Split shaft coupler fastening screw
8. Protective safety guard
9. Trimmer line cutter
10. Semi-automatic string trimmer head / metal three tooth blade
Fig. 1
Included contents:
Electric trimmer, string trimmer head, metal three tooth blade, shoulder strap, tool set

EN
L CTRIC STRING TRIMM R US R'S MANUAL
9
5. ASSEMBLY
Connect the shaft of the trimmer
(Fig 2). Insert the bottom part of the
shaft (Fig 2,
point 1) into the coupling (Fig 2,
point 2),
which is a part of the top part of the
shaft. The locking pin (Fig 2, point 3)
must fit into the hole (Fig 2, point 4).
Then secure both parts in place by
tightening the screw (Fig 2, point 5).
For easier transport of the trimmer, the
shaft can again be separated.
Install the protective guard on to the shaft using the
supplied screws. The nuts are integrated into the
plastic cover (see Fig. 3).
Install the handle (Fig 1, point 5) using the included
screws. The handle can be moved along the shaft. In
this way, everybody can select the ideal comfortable
working position.
After selecting the ideal working position, tighten the
screws.
Installing the string trimmer head.
- Lock the shaft in place by inserting the included hex
key (see Fig. 4). To achieve this, it is necessary to
align the hole in the protective guard with the hole
in the shaft and insert the hex key. Align the holes
by turning the protective guard.
ssembly
Fig. 2
Fig. 3
RETAINING WASHER B
Fig. 4
HEX KEY 4 MM
SHAFT
PROTECTIVE COVER
COGGED RETAINING
WASHER A
LOCKING HOLE
STRING TRIMMER HEAD

EN 10
ZS 2050-E
- Install the individual components in the following
order:
1. Cogged retaining washer A (also equipped
with a retaining hole)
2. Retaining washer B
3. String trimmer head
- Screw the string trimmer head on to the shaft by
turning it clockwise (attention: reverse thread)
and tighten firmly.
- Take the hex key out of the retaining hole.
Winding string trimmer line on to the trimmer head
1. Push in the retaining latches on the side of the
head and take off the cover (see Fig. 5, points
A&B)
2. Take the spool out of the string trimmer head.
Prepare about 2-3 m of string trimmer line with
a diameter of 1.6 mm.
3. Bend the string trimmer line in the middle and
secure the bend in the groove (see Fig. 5,
point C)
4. Wind both ends in parallel on to the spool in
a clockwise direction. Secure the ends of the
wound on string trimmer line into the prepared
holes (see Fig. 5, point D)
5. Return the spool back into the string trimmer
head and secure in place with the cover
(see Fig. 5, points E&F)
WARNING
Use only good quality nylon string trimmer line with
a diameter of 1.6 mm. Never use wire or wire-
reinforced string trimmer line instead of the nylon
string trimmer line. Only use the original string
trimmer head.
B
CD
E F
A
Fig. 5
ssembly

EN
L CTRIC STRING TRIMM R US R'S MANUAL
11
Installing the metal three tooth blade
- Lock the shaft in place by inserting the included
4mm hex key (see Fig. 6). To achieve this, it is
necessary to align the hole in the protective guard
with the hole in the shaft and insert the hex key.
Align the holes by turning the protective guard.
- Install the individual components in the following
order:
1. Cogged retaining washer A (also equipped with
a retaining hole)
2. Metal three tooth blade
3. Retaining washer B
4. Cup cover
5. Lock nut
- Make sure that the blade is correctly seated in the
distancing part of the cogged retaining washer A
- Using the supplied socket wrench, turn the blade
fastening nut clockwise (attention: reverse thread)
until it is securely tightened.
- Take the hex key out of the retaining hole.
WARNING
IN THE EVENT OF EXCESSIVE VIBRATIONS
– IMMEDIATELY STOP THE MOTOR
Excessive vibrations of the blade mean that this blade is not installed correctly. Immediately turn off the motor
and check the blade. An incorrectly installed blade may cause injuries. Only use original accessories when
performing maintenance or servicing this product.
6. STARTING THE TRIMMER
POINTS TO CHECK BEFORE STARTING WORK
1. Check whether any screws, nuts and installation elements are loose. Tighten any loose screws.
2. Make sure that the plastic head guard and the blade is securely fastened in place.
3. Check the blade or the string trimmer head for damage.
WARNING
Prior to starting the trimmer, make sure that the cutting blade/string trimmer head can move
freely and is not touching any foreign objects.
Hold the trimmer firmly with both hands.. Always stand so that your body is on the left of the shaft tube.
Never hold the handle with crossed arms. These instructions also apply to left-handers.
ATTENTION: Exposure to vibrations may damage the health of persons that suffer from circulatory or nerve
system problems. If any physical problems become evident, such as desensitisation, loss of sensitivity, loss of
usual strength or changes in skin colour, please contact a doctor. These systems usually manifest themselves on
fingers, hands or wrists.
Fig. 6
HEX KEY 4 MM
SHAFT
PROTECTIVE COVER
COGGED RETAINING
WASHER A
RETAINING WASHER B
CUP COVER
LOCK NUT
LOCKING HOLE
METAL THREE TOOTH
BLADE
ssembly | Starting the trimmer

EN 12
ZS 2050-E
Starting the trimmer
First press the start/stop trigger safety lock
(Fig. 7, point 1)
Then press the start/stop trigger (Fig. 7,
point 2). The trimmer will run at maximum
speed.
Note: The position of the handle on
which the trigger safety lock and the
start/stop trigger are located can be
set to an appropriate position after
loosening the screws
(Fig. 7, point 3).
Turn off the motor
Release the start/stop trigger (fig. 7, point 2).
7. CUTTING
WARNING!
When working with any string trimmer or brush cutter model, there is a danger of deflecting stones, metal or
small objects and the cut material. Carefully read all the safety directives.
Follow all the instructions provided in this user’s manual.
WARNING!
Use head, eye, face and hearing protection. Use appropriate footwear that will protect your feet and which will
ensure a firm stance on slippery surfaces. Do not wear ties, jewellery or loose clothing that could become caught
in the moving parts of the tool. Do not wear footwear with an open tip. Do not work barefoot or with bare legs. In
certain situations you must use full face and head protection.
Take care to avoid recoil and jamming of the blade.
WARNING
Always use the shoulder strap.
Set the shoulder strap and its hitch on the tool so that the brush cutter is suspended several centimetres above
the terrain. The head of the brush cutter and the metal guard must be level in all directions. Hang the brush cutter
on the right side of the body.
DANGER ZONE
NOBODY APART FROM THE OPERATOR MAY ENTER THE DANGER ZONE OF A 15 METRE RADIUS. THE OPERATOR
MUST USE APPROPRIATE EYE, HEARING, FACE, FOOT, LEG AND BODY PROTECTION. PERSONS LOCATED IN
THE DANGER ZONE OR IN THE RISK ZONE AFTER THE DANGER ZONE MUST USE EYE PROTECTION AGAINST
DEFLECTED OBJECTS. THE RISK IS REDUCED WITH INCREASING DISTANCE FROM THE DANGER ZONE.
tarting the trimmer | Cutting
Fig. 7

EN
L CTRIC STRING TRIMM R US R'S MANUAL
13
CUTTING WITH THE NYLON STRING TRIMMER HEAD
The string trimmer head rotates CLOCKWISE.
The trimmer line is extended out semi-automatically. While trimming, simply gently tap the head on the
ground, which will push down the button on the underside of the head and the string trimmer line will slide
out. The string trimmer line is then shortened to the maximum permitted length on the blade integrated in
the plastic guard.
TRIMMING GRASS
During this activity, carefully move the trimmer into the material that you wish to trim. Slowly tilt the head so
that the trimmed material is ejected away from you. If you are trimming all the way up to obstacles such as
fences, walls and trees, then approach at such an angle that all material is ejected away from you. Slowly
move the head with the nylon string trimmer line from right to left until the grass is trimmed all the way to the
obstacle but avoid the string trimmer line coming into contact with the obstacle.
When trimming in the vicinity of a wire fence or enclosure, proceed carefully so as not to come into contact
with the wires. If you exceed the minimum distance from the fence, the string trimmer line will be shortened
after impact.
When cutting weeds, it is possible to cut one stem at a time. Place the trimmer head with string trimmer line
at the bottom part of the weed - never the top because the stem may start quivering and the string trimmer
line may become caught in it. Rather than attempting to cut the weed directly, it is better to use only the end
of the string trimmer line and to cut the stem slowly.
CLEARING AND TRIMMING EDGES
Both these tasks are performed using the head with the nylon line tilted at large angle. Clearing means
removing the top vegetation after which only soil remains.
Trimming edges means trimming the grass at the edge of lawns that extends on to footpaths and roads.
While clearing and trimming edges, hold the tool at a steep angle and in a position where dirt, cut material
and stones will not be ejected backwards towards you in the event that they ricochet from a hard surface.
Despite the pictures showing how to perform clearing and trimming of edges, every user must find their own
position that will suit their body dimensions and working conditions.
WARNING
If a head with a nylon line is used, the correct protective guard must be fitted. If the nylon line extends out too far,
it may start fluttering. If you use a head with a nylon line, always use the protective plastic guard with the cutter
blade.
WARNING
Be very careful when working above soil or gravel because the nylon line may deflect small stones at a very high
speed.
The protective guard on this tool cannot stop objects that ricochet off hard surfaces.
WARNING
Do not trim in places where there are wires and wire mesh. Use protective aids. Do not trim in locations where
you cannot see what the trimmer is trimming.
utting

EN 14
ZS 2050-E
CUTTING USING THE BLADE
CUTTING WEEDS
This is cutting performed by a pendular movement of the blade in an arch shape. In this way you can quickly
clear a large area of dense grass and weed. Brush cutting should be used for cutting large and tough weeds
or woody vegetation.
Brush cutting may be performed in both directions or only in one direction, which will mean that the cut
material will be ejected away from you. With this type of cutting, the part of the blade moving away from you
will do the work. Slightly tilt the blade down to the same side. If you will be brush cutting in both directions,
you will be hit by some deflected material.
Note: Do not use the brush cutter blade for cutting trees with a diameter larger than 12 mm.
WARNING
DO NOT TOUCH THE FOLLOWING OBJECTS WITH THE BLADE:
METAL POLES, ELECTRICAL WIRE, RUBBER, MASONRY, STONES, FENCES
WARNING
Do not cut if the metal blade is blunt, cracked or damaged.
Before starting to cut, check that there are no obstacles in the work area such as rocks, metal poles or wound up
wires. If you cannot remove these obstacles, mark them out so that they do not come in contact with the blade.
Rocks or metal objects will blunt or damage the blade. Wires may wind on to the blade head or may be deflected
and cause injuries.
8. MAINTENANCE
The string trimmer line may dry out over time. To maintain it in excellent condition, store spare pre-wound
spools or loose trimmer line in a plastic bag with a spoon of water.
For cleaning the power tool, use only gentle soap and a damp cloth. Do not submerge the power tool in
water or spray it with a hose. Do not allow any liquid to enter inside. Do not clean with pressurised water.
The trimmer line cutter on the edge of the protective guard may become blunt over time. We recommend that
it is regularly resharpened with a file.
utting | Maintenance

EN
L CTRIC STRING TRIMM R US R'S MANUAL
15
9. DISPOSAL
INSTRUCTIONS AND INFORMATION REGARDING THE DISPOSAL OF USED
PACKAGING MATERIALS
Dispose of used packaging material at a site designated for waste in your municipality.
The machine and its accessories are manufactured from various materials, e.g. metal and
plastic.
Take damaged parts to a recycling centre. Inquire at the relevant government department.
Changes in the text, design and technical specifications may be made without prior notice and we reserve
the right to make these changes.
User’s manual in original language.
isposal

EN 16
ZS 2050-E
10. DECLARATION OF CONFORMITY
CE DECLARATION OF CONFORMITY
Manufacturer:
FAST ČR, a. s.
Černokostelecká 2111, 100 00 Prague 10, Czech Republic
Tax ID number: CZ26726548
Product/brand: ELECTRIC BRUSH CUTTER AND STRING TRIMMER / FIELDMANN
Type/model: FZS 2050 E
230 V, 1 400 W, 50 Hz, Class II
This product meets the directives below:
ES Directive No. 2000/14/ES for noise emissions of outdoor equipment
ES Council Directive No. 2006/42/ES for Machinery
ES Directive No. 2004/108/ES for electromagnetic compatibility (EMC)
EC Directive No. 2002/95/ES for RoHS
and norms:
EN 60335-1/A15:2011
EN 60335-2-91:2003
EN 62233:2008
EN ISO 11806–1:2011
EN 55014-1:2006+A1:2009+A2:2011
EN 55014-2:1997+A1:2001+A2:2008
EN 61000-3-2:2006+A1:2009+A2:2009
EN 61000-3-11:2000
CE mark: 14
FAST ČR, a.s. is authorised to act on behalf of the manufacturer.
Place of issue: Prague Name: Ing. Zdeněk Pech
Chairman of the Board of Directors
Date of issue: 7. 5. 2014 Signature:
eclaration of Conformity

EN
L CTRIC STRING TRIMM R US R'S MANUAL
17
11. TECHNICAL SPECIFICATIONS
Model ..........................................................................................................................................................................................FZS 2050-E
Voltage/Frequency...................................................................................................................................................230-240V~/50Hz
Electric motor power input.........................................................................................................................................................1,400 W
Cutting coverage...............................................................................................................................................................................42 cm
Type of string trimmer head.........................................................................................................................................Semi-automatic
Idling speed..............................................................................................................................................................................10,000 rpm
Trimmer line diameter....................................................................................................................................................................1.6 mm
Weight without fuel and cutting tools......................................................................................................................................... 6.0 kg
echnical specifications

EN 18
ZS 2050-E
otes