Filtrific S64 User manual

Phone: [phone] Web: www.ltric.com Copyright 2013 by Filtric Company LLC.
S64 Fixed Skimmer with T75F Filter Tank
Vanishing Water Installation
6.00 Water At -Rest Level & Overflow
6.00 Water At-Rest Level
8.75
Level Intake
In this installation, deeper
Vanishing Pools are possible by
placing the Drain Intake level with
the bottom of the intake pipe.
Overflow
Downhill Installation
Trim or lower the skimmer surface
as needed to accomodate the
rate of pumping. The skimmer
can also be adjusted by rotating
the eccentric coupling.
A Drain Intake allows water to drop
below the top of the skimmer when
the pump is shut off.
In a level intake installation, the At-Rest water level in the water
feature will will be at the bottom of the overflow port.
S64 Skimmer & T75F Filter Tank| VanishingWater
Liner is lowered for a Vanishing Pool
(Typically an additional 3". The water
will vanish just below the rock surface.
F
ILTRIF
IC
®
Professional Water Feature Equipment

Phone: [phone] Web: www.ltric.com Copyright 2013 by Filtric Company LLC.
S64 Fixed Skimmer with T75F Filter Tank
Pond & Hybri-Pond Installation
2.50 At -Rest water level & Overflow
8.75
2.50 At -Rest water Level
B
Sufficient containment is required when the Filter
Tank is placed below the rim of the water feature.
Level Intake
Overflow
S64 Skimmer & T75F Filter Tank| Pond | Hybri-Pond
A
A
B
The Filter Tank Rim is placed
level with the rim of the
water feature. (see below)
The Filter Tank Rim is placed
below the rim of the water
feature. This configuration
needs the capacity to
contain the water in motion
when the pump is shut off.
(see below)
In a raised water feature the
water in the pond will drop to
the top edge of the skimmer
when the system is shut off.
The skimmer can also
be raised and lowered
by rotating the
eccentric coupling.
T40SP Additional Containment
Trim or lower the skimming surface
as needed to accommodate the
rate of pumping. The skimmer can
also be adjusted by rotating the
eccentric coupling.
Pond
Hybri-Pond
F
ILTRIF
IC
®
Professional Water Feature Equipment

Phone: [phone] Web: www.ltric.com Copyright 2013 by Filtric Company LLC.
S64 Fixed Skimmer with T390F Filter Tank
Vanishing Water Installation
8.00 At-Rest Water Level & Overflow
8.00 At-Rest Water Level
8.75
In a level intake installation, the AT-Rest water level in the water
feature will drop to the bottom of the overflow port.
Level Intake
In this installation, deeper
Vanishing Pools are possible by
placing the Drain Intake level
with the bottom of the intake
pipe.
Downhill Installation
Overflow
Trim or lower the skimmer surface
as needed to accommodate the
rate of pumping. the skimmer
can also be adjusted by rotating
the eccentric coupling.
A Drain Intake allows water to drop
below the top of the skimmer when
the pump is shut off.
Liner is lowered for a Vanishing Pool
(Typically an additional 3". The water
will vanish just below the rock surface.
S64 Skimmer & T390F Filter Tank| VanishingWater
F
ILTRIF
IC
®
Professional Water Feature Equipment

Phone: [phone] Web: www.ltric.com Copyright 2013 by Filtric Company LLC.
S64 Fixed Skimmer with T390F Filter Tank
Pond & Hybri-Pond Installation
2.50 At-Rest Water Level & Overflow
2.50 At-Rest Water Level
8.75
T165XP Additional Containment
Sufficient containment is required when the Filter
Tank is placed below the rim of the water feature.
Overflow
The Filter Tank Rim is placed
below the rim of the water
feature. This configuration
needs the capacity to
contain the water in motion
when the pump is shut off.
(see below)
The Filter Tank Rim is placed
level with the rim of the
water feature. (see below)
B
A
S64 Skimmer & T390F Filter Tank| Pond | Hybri-Pond
Trim the skimmer below the
at rest level to allow
sufficient water depth over
the skimmer to match the
demand of the pump.
Pond
Hybri-Pond
Level Intake
B
In a raised water feature the
water in the pond will drop to
the top edge of the skimmer
when the system is shut off.
A
Trim or lower the skimming surface
as needed to accommodate the
rate of pumping. The skimmer can
also be adjusted by rotating the
eccentric coupling.
F
ILTRIF
IC
®
Professional Water Feature Equipment