Finlux 37FLHD760CH User manual

37FLHD760 (CH)
colour television
télévision couleur
farbfernsehgerät
owner’s manual
manuel de l'utilisateur
bedienungsanleitung

English - 1 -
Features ............................................................... 3
Accessories ......................................................... 3
Introduction ........................................................... 4
Preparation ........................................................... 4
Safety Precautions ............................................... 4
Overview of the Remote Control .......................... 6
LCD TV and Operating Buttons ............................ 7
Viewing the Connections ..................................... 8
Power Connection .............................................. 10
Aerial Connection ............................................... 10
Connecting the LCD TV to a PC .......................... 11
Connecting to a DVD Player ............................... 12
Using Side Connectors ....................................... 13
Connecting Other Equipment via Scart ............... 14
Input Selection .................................................... 14
Inserting Batteries in the Remote Control
Handset .............................................................. 15
Operating Range for the Remote Control ............ 15
Switching the TV On/Off .................................... 16
To switch the TV on: ...................................... 16
To Switch the TV Off ...................................... 16
Navigating the Menu System .............................. 16
Initial Settings ...................................................... 17
General Operation .............................................. 18
Information Banner ......................................... 18
Electronic Programme Guide (EPG) ................. 18
Over Air Download ..................................... 19
Displaying the Subtitles ................................... 20
Teletext ........................................................... 20
IDTV Menu System ............................................. 20
Channel List .................................................... 20
Navigating the Entire Channel List ............... 20
Moving the channels in the channel list ....... 20
Deleting the Channels in the Channel List ... 21
Renaming channels ..................................... 21
Adding Locks to Channels .......................... 21
Setting Favourites ....................................... 22
How to Add a Channel to a Favourites List . 22
Removing a Channel from a Favourite List .. 22
Using BLUE Button to Navigate through the
Favourite Channels ..................................... 23
On Screen Help ........................................... 23
Installation ....................................................... 23
Automatic Search ....................................... 23
Manual Search ............................................ 24
First Time Installation ................................... 24
Configuration .................................................. 25
Favourite Mode ........................................... 25
Channel List ................................................ 25
Language Settings ...................................... 25
System Language ....................................... 26
Audio Language .......................................... 26
Subtitle Language ....................................... 26
Parental Settings ......................................... 26
Maturity Lock ........................................ 26
Menu Lock ............................................ 26
Set Lock Key ........................................ 27
Time Settings ............................................... 27
Receiver Upgrade ....................................... 27
Timers ............................................................. 27
TV Setup......................................................... 28
Common Interface ........................................... 28
Menu System ...................................................... 29
Picture Menu ................................................... 29
Mode ........................................................... 29
Contrast/Brightness/Sharpness/Colour/Hue 29
Colour Temp ................................................ 29
Noise Reduction .......................................... 30
Film Mode .................................................... 30
Store ........................................................... 30
Reset .......................................................... 30
Sound Menu.................................................... 30
Volume ........................................................ 30
Equalizer ..................................................... 30
Balance ....................................................... 30
Headphone.................................................. 30
Volume .................................................. 30
Balance ................................................. 30
Sound Mode ................................................ 31
AVL ............................................................. 31
Effect .......................................................... 31
Dynamic Bass ............................................. 31
SRS TruSurr XT .......................................... 31
Subwoofer .................................................. 31
Store ........................................................... 31
Feature Menu.................................................. 31
Sleep Timer ................................................. 31
Child Lock ................................................... 31
Language .................................................... 32
EXT-2 Out .................................................... 32
Default Zoom ............................................... 32
Blue Background ......................................... 32
Menu Background ....................................... 32
Menu Timeout .............................................. 32
Teletext Language ....................................... 32
Install Menu ..................................................... 33
Program ...................................................... 33
Band ........................................................... 33
Channel ....................................................... 33
Colour System ............................................. 33
Sound System ............................................. 33
Fine Tune .................................................... 33
Search ........................................................ 33
VCR ............................................................ 33
Store Program ............................................. 33
Program Menu ................................................. 33
Name .................................................... 34
Insert .................................................... 34
Delete.................................................... 34
APS (Auto Programming System) ......... 34
Contents
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:451

English - 2 -
Country ....................................................... 34
Install Menu in AV Modes ............................ 34
Colour System ...................................... 34
VCR ...................................................... 35
Store Program ............................................. 35
Source Menu .................................................. 35
PC Mode Menu System ....................................... 35
Sound Menu.................................................... 35
Feature Menu.................................................. 35
PC Picture Menu .............................................. 35
PC Picture Position Menu................................. 35
Autoposition ................................................ 36
H (Horizontal) Position ................................. 36
V (Vertical) Position .................................... 36
Dot Clock ..................................................... 36
Phase .......................................................... 36
No-Signal and Out Of Range Detection (PC
mode) ............................................................. 36
Displaying TV Information ................................... 36
Mute Function ..................................................... 36
PIP (Picture-in-Picture) and PAP (Picture-and-
Picture) Modes ................................................... 37
Freezing Picture ................................................. 37
Zoom Modes ....................................................... 37
Auto ............................................................ 37
Full .............................................................. 37
4:3 ............................................................... 37
Panoramic ................................................... 37
14:9 Zoom ................................................... 38
Cinema ........................................................ 38
16:9 Subtitle ................................................ 38
Teletext ............................................................... 38
Tips .................................................................... 39
Screen Care ................................................... 39
No Power........................................................ 39
Poor Picture .................................................... 39
Input Sources ................................................. 39
CI Module ........................................................ 39
Appendix A: PC Input Typical Display Modes ...... 40
Information for users applicable in European
Union countries ........................................... 40
Appendix B: Main and PIP-PAP Picture
Combinations ...................................................... 41
Appendix C: AV and HDMI Signal Compatibility ... 42
Appendix D: Pin Specifications ........................... 43
Specifications ..................................................... 44
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:452

English - 3 -
Features
• Remote controlled colour LCD TV.
• Fully integrated digital TV (DVB-T).
• It has two HDMI connectors for digital video
and audio. This connection is also designed
to accept high definition signals.
• Full HD (1920x1080).
• 100 programmes from VHF, UHF bands or
cable channels can be preset.
• It can tune cable channels.
• OSD menu system.
• It has 2 scart sockets for external devices
(such as video, video games, audio set, etc.).
• AV in available.
• Stereo sound system (SRS Trusurround XT)
• Teletext, fastext, TOP text.
• Headphone connection.
• Automatic programming system.
• Forward or backward automatic tuning.
• Sleep timer.
• Child lock.
• Automatic sound mute when no transmission.
• NTSC playback.
• PIP / PAP / PAT functions.
• AVL (Automatic Volume Limiting).
• When no valid signal is detected, after 5
minutes the TV switches itself automatically
to standby mode.
• PLL (Frequency Search).
• PC input.
• Plug&Play for Windows 98, ME, 2000, XP, Vista.
• Audio line out.
Accessories
i
P<P
+
-
P
P
V
V
+
-
AV
0
-/--
78
9
45
6
12
3
ABC
DEF
GHI
JKL
MNO
PQR
STU
VWX
YZ
TV
SAT
DV D
D VD- R
RC MODE
V.SOURCE +10
WAT CHTV/C RETURN
SETUP/ TIME
TV-RADIO OPTS
AUDIO DISPLAY
HELP
GUIDE S UBTITLE REPEAT
LANG.
TEXT
LIST FREEZE FAV.
OK
I-II
/II
Remote Controller
Batteries
2 XAAA
Instruction Book
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:453

English - 4 -
Introduction
Thank you for choosing this
product. This manual will guide
you for the proper operation of
your TV. Before operating the TV,
please read this manual throughly.
Please do keep this manual in a safe place
for future references.
Preparation
For ventilation, leave a free space of at least
10 cm all around the set. To prevent any fault
and unsafe situations, please do not place
any objects on top of the set.
Use this device in moderate climates.
Safety Precautions
Please read the following recommended
safety precautions carefully for your safety.
1.Power Source
The TV set should be operated only from a
220-240 V AC, 50 Hz outlet. Ensure that you
select the correct voltage setting for your
convenience.
2.Power Cord
Do not place the set, a piece of furniture, etc.
on the power cord (mains lead) or pinch the
cord. Handle the power cord by the plug. Do
not pull out the plug by tugging the cord and
never touch the power cord when your hands
are wet as this could cause a short circuit or
electric shock. Never make a knot in the cord
or tie it with other cords. The power cords
should be placed in such a way that they are
not likely to be stepped on. A damaged power
cord can cause fire or give you an electric shock.
When it is damaged and needs to be changed,
it should be done by qualified personnel.
3.Moisture and Water
Do not use this equipment in a humid and
damp place (avoid the bathroom, the sink in
the kitchen, and near the washing machine).
Do not expose this equipment to rain or water,
as this may be dangerous and do not place
objects filled with liquids, such as flower
vases, on top. Avoid from dripping or
splashing.
If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualified
personnel before operating it any further.
4.Cleaning
Before cleaning, unplug the TV set from the
wall outlet. Do not use liquid or aerosol
cleaners. Use soft and dry cloth.
5. Ventilation
The slots and openings on the TV set are
intended for ventilation and to ensure reliable
operation. To prevent overheating, these
openings must not be blocked or covered in
anyway.
6. Heat and Flames
The set should not be placed near to naked
flames and sources of intense heat, such as
an electric heater. Ensure that no naked flame
sources, such as lighted candles, are placed
on top of the TV. Batteries shall not be exposed
to excessive heat such as sunshine, fire or
the like.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:454

English - 5 -
7. Lightning
In case of storm and lightning or when going
on holiday, disconnect the power cord from
the wall outlet.
8. Replacement Parts
When replacement parts are required, be sure
the service technician has used replacement
parts which are specified by the manufacturer
or have the same specifications as the
original one. Unauthorized substitutions may
result in fire, electrical shock, or other hazards.
9. Servicing
Please refer all servicing to qualified
personnel. Do not remove the cover yourself
as this may result in an electric shock.
10. Waste Disposal
Instructions for waste disposal:
• Packaging and packaging aids are recyclable
and should principally be recycled.
Packaging materials, such as foil bag, must
be kept away from children.
• Battery, including those which are heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
battery in an environmentally sound manner.
Find out about the legal regulations which
apply in your area.
• Cold cathode fluoresant lamp in LCD PANEL
contains a small amount of mercury; please
follow local ordinates or regulations for
disposal.
11. Disconnect Device
The mains plug is used to disconnect TV set
from the mains and therefore it shall remain
readily operable.
12.
Excessive sound pressure from earphones
and headphones can cause hearing loss.
13.
To prevent injury, this device must be securely
attached to the wall in accordance with the
installation instructions when mounted to the
wall (if the option is available).
“The LCD panel is very high technology product
with about a million thin film transistors, giving
you fine picture details. Occasionally, a few
non-active pixels may appear on the screen
as a fixed point of blue, green or red. Please
note that this does not affect the performance
of your product.”
“DO NOT LEAVE YOUR TV ON STAND-BY OR
OPERATING WHEN YOU LEAVE YOUR
HOUSE”
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:455

English - 6 -
Overview of the Remote Control
1
Mode Selection Leds
2
Stand By
3
Direct Program
4
No Function
5
Programme Up
6
Volume Down / Volume Up
7 Menu
8
Previous Program
Cursor Buttons
Teletext / Picture and TXT
Info
Image Size / Expand
Install
Feature / Audio Language On/Off in DTV
Picture
Sound
MIX / PIP/PAP On-Offf
Index
Mono / Stereo / Dual I-II
Okay / Freeze
TV / DTV
Programme Down
Mute
External Source
RC MODE SELECTION
i
P<P
+
-
P
P
V
V
+
-
AV
0
-/--
78
9
45
6
12
3
ABC
DEF
GHI
JKL
MNO
PQR
STU
VWX
YZ
TV SAT DVD
DVD-R
RC MODE
V.SOURCE +10
WATCH TV/C RETURN
SETUP / TIME
TV-RADIO OPTS
AUDIO DISPLAY
HELP
GUIDE SUBTITLE REPEAT
LANG.
TEXT
LIST FREEZE FAV.
1
2
3
4
5
6
7
8
9
1
1
1
0
1
1
1
1
1
2
1
3
4
5
5
6
1
8
1
71
9
2
2
0
2
2
2
4
3
2
2
OK
I-II
/II
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:456

English - 7 -
LCD TV and Operating Buttons
+
P/CH
+
TV/AV
MENU
+
P/CH
+
TV/ AV
MEN U
TV/AV button
MENUbutton
Volume Up/
Volume Down buttons
Standby button
Program Up/
Program Down buttons
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:467

English - 8 -
Viewing the Connections
HIJ
L
M
N
G
EF
K
A
O
B
C
D
P
Power Cable
Video Input is used for connecting video signals of external devices.
Connect the video cable between the VIDEO IN socket on the TV and the VIDEO OUT jack on
your device.
Audio Inputs are used for connecting audio signals of external devices.
Connect the audio cable between the AUDIO INPUTS on the TV and the AUDIO OUTPUT
jacks on your device.
Headphone jack is used for connecting an external headphone to the system.
Connect to the HEADPHONE jack to listen to the TV from headphones (optional).
PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.
PC Audio Inputs connects to audio jacks of your PC to enable PC audio.
Connect the PC audio cable between the PC AUDIO INPUTS on the TV and audio output of
your PC.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:468

English - 9 -
Audio Line Outs output audio signals to an external device such as an optional sound
system.
To connect the external speakers to your TV, use AUDIO LINE OUTS of the TV with an audio
cable.
Component Audio Inputs are used for connecting component audio.
Connect the audio cable between COMPONENT AUDIO INPUTS on the TV and audio outputs
of your device.
Component Video Inputs (YpBPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the COMPONENT VIDEO INPUTS on
the TV and the component video outputs of your device. While connecting, be sure that the
letters on your TV, “Y”, “Pb”, “Pr” correspond with your device’s connectors.
HDMI Inputs are for connecting a device that has an HDMI socket.
Your LCD Television is capable of displaying High Definition pictures from devices such as a
High Definition Satellite Receiver or DVD Player. These devices must be connected via the
HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i signals.
Also, only HDMI modes accept 1080p signals. No sound connection is needed for an HDMI to
HDMI connection.
SCART 1 inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your external
device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically
switch to AV mode. If both sockets are employed at the sime time, SCART 1 becomes
the preferential.
SCART 2 inputs or outputs for external devices.
RF Input connects to an antenna or a cable.
Note that if you use a decoder or a media recorder, you should connect the aerial cable
through the device to the television with an appropriate antenna cable, as shown in the
illustration below.
This connector is for service use only..
CI Slot and SPDIF Out. CI Slot is used for inserting a CI card. A CI card allows you to view
all the channels that you subscribe to. For more information, see “Common Interface” section.
S/PDIF Out is used for transferring digital audio signals. Use an RCA cable to transfer audio
signals to a device that has S/PDIF input.
Subwoofer Out is for connecting an external, active subwoofer to the set to give a much
deeper bass effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:469

English - 10 -
Power Connection
IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.
• After unpacking, allow the TV set to reach the ambient room temperature before you
connect the set to the mains.
• Plug the power cable to the mains socket outlet.
Aerial Connection
• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.
Aerial Input
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4610

English - 11 -
Connecting the LCD TV to a PC
For displaying your computer’s screen image on your LCD TV, you can connect your computer
to the TV set.
• Power off both computer and display before making any connections.
• Use 15-pin D-sub display cable to connect a PC to the LCD TV.
• When done, switch to PC source. See, “Input selection” section.
• Set the resolution that suits your viewing requirements.
PC audio cable
(not supplied)
to audio output
PC RGB cable
(not supplied)
to PC RGB output
PC audio
inputs
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4611

English - 12 -
Connecting to a DVD Player
If you want to connect a DVD player to your LCD TV, you can use connectors of the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.
Note: Cables shown in the illustration are not supplied.
• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, “Source menu” section.
• Most DVD players are connected through COMPONENT SOCKETS. Use a component video
cable to connect video input. For enabling audio, use a component audio cable as illustrated
below. When done, switch to YPbPr source. See, “Input selection” section.
• You may also connect through the SCART 1 or SCART 2. Use a SCART cable as shown
below.
Component
video
inputs
Component
audio
inputs
Component
audio
cable
Component
video
cable
SCART
cable
HDMI
cable
HDMI
inputs
SCART
sockets
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4612

English - 13 -
Using Side Connectors
You can connect a range of optional equipment to your LCD TV. Possible connections are
shown below. Note that cables shown in the illustration are not supplied.
• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. Do
not connect the camcoder to VIDEO IN socket at the sime time since it can cause noise in the
picture. For selecting the related source, see the section “Input selection” in the following
parts.
• To connect external speakers, use an audio cable. Do not reverse the AUDIO LEFT and
AUDIO RIGHT jacks. Turn on the LCD TV and external speaker set after all connections are
made. Refer to your speaker set’s manual for further queries.
• To listen the sound from headphones, connect to the HEADPHONE jack of theTV.
• For connecting a subwoofer, connect to the SUBWOOFER OUT.
Headphone
Videocamera
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4613

English - 14 -
Connecting Other Equipment via Scart
Most devices support SCART connection. You can connect a DVD recorder, a VCR or a decoder
to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not
supplied.
Power off both the TV and the devices before making any connections.
For more information, refer to your device’s own instruction book.
SCART
sockets
VCR
DVD Recorder
Decoder
Input Selection
Once you have connected external systems to your TV, you can switch to different input sources.
• Press AV button on your remote control for directly changing sources.
or,
• Select “Source” option from the main menu by using or button and press OK button.
Use then or button to highlight an input and press OK button to select.
SOURCE : TV
TV
EXT - 1
EXT - 2
EXT - 3
EXT - 4
EXT - 5
EXT - 6
PC
TUNER
SCART
YPbPr
FAV
SCART
HDMI
DTV
HDMI
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4614

English - 15 -
Inserting Batteries in the
Remote Control Handset
WARNING: Remote control is battery
included. A plastic protector is
used to disconnect the batteries
in order to prevent the battery life
from reducing. Please remove
the plastic protector before the
first use.
• Remove the battery cover located on the back
of the handset by gently pulling backwards
from the indicated part.
• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right
directions and replace the battery cover.
Note: Remove the battery from remote control
handset when it is not to be used for a
long period. Otherwise it can be
damaged due to any leakage of
batteries.
Operating Range for the
Remote Control
• Point the top of the remote control toward
the LCD TV's remote sensor LED while
pressing a button.
30
30
i
P<P
+
-
P
P
V
V
+
-
AV
0
-/--
78
9
4 5
6
1 2
3
ABC
DEF
GHI
JKL
MNO
PQR
STU
VWX
YZ
TV
S AT
DV D
DV D-R
RC MODE
V.SOURCE
+10
WATCH TV/C
RETURN
SETUP / TIME
TV-RADIO OPTS
AUDIO DISPLAY
HELP
GUIDE SUBTITLE REPE AT
LANG .
TEXT
LIST FREEZE FAV.
OK
I-II
/II
Remote range is approximately 7m/23ft.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4615

English - 16 -
Switching the TV On/Off
To switch the TV on:
Your TV will switch on in two steps:
1- Connect the power to 220-240V AC 50Hz.
Press stand-by button.Then the TV
switches itself to stand-by mode (Optional).
2- To switch on the TV from stand-by mode
either:
Press a digit button on the remote control so
that a channel number is selected, or Press
the -P/CH or P/CH+ button on the TV or press
the Ch+ or Ch- button on the remote control,
so that last mode switched off is selected.
By either method the TV will switch on.
To Switch the TV Off
Press stand-by button on the remote control
or stand-by button on the TV so the TV will
switch to standby mode. To power down the
TV completely, unplug the power cord from
the mains socket.
Navigating the Menu System
For displaying
menu options
For navigation
To confirm
choices
• Press Mto display the main menu.
• Press or button to select an icon. Press
or OK button for more options.
• Use or button to highlight.
• Press or buttons to change the settings.
Press OK to set as default.
• To exit the menu or return from sub-menu
screen, press M.
Note: These explanations are valid for the
navigation of the whole menu system.
To select options that are explained in
the following parts, refer to “Navigating
the Menu System”.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4616

English - 17 -
Initial Settings
When the TV set is operated for the first time,
the IDTV turns on first. Because this is the
first time that the IDTV has been used, there
are no channels stored in the memory.
When the TV is turned on for the first time, the
menu for the language selection appears on
the screen. The message “Welcome please
select your language!” is displayed in all
language options sequentially in the OSD.
By pressing the

or

buttons highlight the
language you want to set and press OK button.
In the dialog box “Set Language” is displayed
next to “OK” item to indicate that “Press
SELECT button to set the highlighted
language option.”
You can get information about the menu
usage by pressing button. Press
button again to exit the help menu.
After then, “First time installation” OSD will
appear on the screen. By pressing

or

buttons, select the country you want to set and
press OK button.
First time installation
Choose country
Set country and continue installation
OK
Czech
After the “First time installation” is
performed, the following message appears
on the screen:
Do you want to start automatic search?
Yes No
• To start automatic search, select “Yes”, to
cancel select “No”.
• To select the “Yes” or “No” option, highlight
the item by using

or

buttons and press
OK button.
The IDTV will automatically tune to the UHF
transmission channels 21 to 68, searching for
digital terrestrial TV broadcasts and displaying the
names of channels found. This process will take
about five minutes. To cancel searching, you can
press Mbutton at any time during the process.
The following OSD will be displayed during
the automatic search:
MENU
Codec 4:3
Codec 16:9
Searching Channel: UHF 62.
Please wait. This will take a few minutes
Cancel searching
Automatic Search
After Automatic Search is completed, the
following message asking for analogue
channel search appears on the screen. TV
switches to the analogue TV mode.
Yes
To search for analogue channels, select “Yes”.
The following menu will be displayed to search
for analogue channels:
AUTO PROGRAM
Language
English
Country
UK
Teletext Language West
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4617

English - 18 -
Set Language item by pressing

or

button.
Press

or

button to highlight Country item
and then use

or

to set. Afterwards, by
pressing

or

button, highlight Text
Language and use

or

to set. When
finished, press OK button to continue and the
following OSD will be displayed:
APS is running...
Cancel
After initial aps is finalized, a programme list
will appear on the screen. In the programme
list you will see the programme numbers and
names assigned to the programmes.
If you do not accept the locations and/or the
names of the programmes, you can change
them in Program table. For details, see the
section, “Program table”.
General Operation
Pressing the
TV
DTV
button at any time while
watching television programmes will switch
the TV set between the digital terrestrial
television broadcasting and the analogue
broadcasting.
Information Banner
• Whenever you change the channel using the
P + or P - buttons or the numeric buttons, the
TV displays the broadcast picture along with
an information banner at the bottom of the
screen. This will remain on the screen for
approximately three seconds.
• The information banner can also be
displayed by pressing the button at any
time while watching the TV. Pressing
button again removes the banner.
4 RTL 09:10
CH 48
Now: NEWS
Next: NEWS
Signal :
04:35-11:00
11:00-17:55
• The information banner gives information
on the channel selected and the programme
on it.
• The name of the channel is displayed along
with its channel list number and with an
indication of the strength of the signal
received on this tuning channel.
• The current and next programme information
are given with the beginning and ending
time.
• The current time information is displayed
along with channel name.
Hint: Not all channels broadcast the
programme data. If the name and times
of the programme are not available then
“No Information Available” is displayed
in the information banner.
Note: If the selected channel is locked, you
must enter the correct four digit key to
view the channel. In such a situation, a
dialog box asking for the lock key will
be displayed:
Enter Lock Key
Electronic Programme Guide (EPG)
Some, but not all, channels send information
about the current and next events. Please note
that event information is updated automatically.
If there are no event information data available
for channels, only channel name with “No
Information Available” banner is displayed.
• Press button to view the EPG menu.
• Press

or

buttons to navigate in
Channels or Programmes.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4618

English - 19 -
• Press

or

buttons to navigate through the
channel and programme list.
• In EPG Menu, you can easily see the extended
help information by pressing the button.
News 10:00-11.00
1. ONE Commonwealth … Nachrighten
2. BBC TWO Driven Crazy Clifford The Big Red Dog
5. five The Chart Dawson’s Creek
Navigate Schedule Watch More
Electronic Programme Guide Wed 31/7 09:13
1 ONE
OK
5. FIVE The Chart Dawson’s Creek
• You can close this window by pressing the
same button again.
• In the EPG menu all channels are displayed.
The current channel is highlighted when you
enter the EPG menu.
• Use

or

buttons to change the channel.
Also press RED or GREEN buttons to scroll
up/down the pages for the channels. Press
OK button to watch the highlighted channel.
• If you highlight an event, short event
description, extended event description, start
and end time of the event are displayed on
the screen.
• If you press OK button when a next event is
highlighted, a reminder is set for the
highlighted programme and a clock icon
appears across the highlighted channel line
as shown in the following EPG menu figure.
Programme reminders is set to signal that a
programme is about to start when you are
watching another channel. If you set reminder
for a programme, then you will be asked for
switching to that channel when the reminder
time is due.
News 10:00-11.00
1. ONE Commonwealth … Nachrighten
2. BBC TWO Driven Crazy Clifford The Big Red Dog
5. five The Chart Dawson’s Creek
Navigate Schedule Reminder More
Electronic Programme Guide Wed 31/7 09:13
1 RTL
OK
5. FIVE The Chart Dawson’s Creek
I
I
• When you press the BLUE button you can view
the extended schedule of the programmes.
• By pressing the button you can see the
detailed help information easily. By pressing
button again you can exit help menu.
• By pressing the BLUE button, the following
EPG menu appears on the screen:
1. BBC ONE
2. BBC TWO
5. Five
7. BBC Choice
11.DISCOVERY
15.BBC NEWS 24
17.BBCi
I
More
Advance Day
Electronic Programme Guide
Wed 21/4 10:12
No Information Available
BBC ONE TUE 21/4, 20:00-22:00
Navigate Change Time
•BypressingYELLOW/BLUEbutton,youcanadvance
the schedule of a day backwards/forwards.
• By pressing / buttons you can change
the schedule time.
• If you press button you can see the
detailed help information easily. By pressing
button again you can exit help menu.
Over Air Download
To ensure that your IDTV always has the most
up-to-date information, please ensure that, after
use, it is set to standby mode.At 3 A.M. each day,
the IDTV automatically searches for any updates
which may be broadcast and will download this
to your IDTV automatically. This operation will
normally take approximately 30 minutes.
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p6527.09.2007, 16:4619