Fire-Lite DP-4XF User manual

Rail
Rail
Stand-off
Stand-off
Dress Pane
l
DP-4XF Dress Panel 4X Backbox
Use these holes for
Type A
cabinet
Use these holes for
Type A
cabinet
Type A:
PEM nuts in rail
Type A:
PEM nuts in rail
The DP-4XF Kit includes the dress panel,
four screws, and four stand-offs. To install
the DP-4XF on the 4X backbox, you must
first determine which type of backbox you
have.
Cabinet Type A: This backbox has PEM
nuts on the rails inside the box. Screw the
four 1-15/16" standoffs into the nuts in the
rails. Then secure the dress panel with the
screws provided.
DP-4XF
Product Installation Drawing
Document 15619 Rev:A 11/24/92
P/N 15619:A ECN 92-197

DP-4XF Dress Panel 4X Backbox
Type B:
Holes in flanges
Type B:
Holes in flanges
Use these holes for
Type B
cabinet
Use these holes for
Type B
cabinet
Cabinet Type B: This backbox has no
PEM nuts in the rails but rather, has holes
on the top and bottom flanges. Secure the
dress panel to the backbox with the screws
provided.
NOTE: If the meter option is not to be used,
install the plate with the two screws pro-
vided over the meter hole.
Rail
Rail
Dress Pane
l
Document 15619 Rev:A 11/24/92 P/N 15619:A