Fired Up Corporation OKO S1 User manual

FUI0123_V1_300523
INSTALLATION GUIDE
www.firedupcorporation.com/manual
Please read through the use & care manual provided with this product first.
BIO ETHANOL STOVE
This guide is to be used in conjunction with the
manual supplied with the stove
This manual is for the following models:
OKO S1 OKO S2
BEF0014 (S1) BEF0014 (S2)

02
INSTALLATION
ATTENTION
Do not store fuel on the shelf underneath the fire.
OPENING THE DOOR
DISTANCES FROM WALL
1.To open the door, turn the handle
anti-clockwise to a horizontal
position.
Distance from A.
• Marble/Stone: > 5mm
• Wood (including MDF & MFC): > 10mm
• Wallpaper: > 100mm
2. Once in position, pull the door
to open.
A.

03
INSTALLATION
IMPORTANT
FITTING THE STOVE PIPE (if applicable)
Parts Supplied
2 x Metal Plates
*Images for illustrative purposes only
1. Assemble the stove pipe insert into an ‘X’
and push into the bottom of the stove pipe.
2. Place the stove pipe on top of the stove
and push the stove pipe against the
wall/back panel.
ATTENTION: DO NOT place anything within 50mm
of the front of the stove to ensure
the vents on top of the stove are
left clear.
ONLY COMPATIBLE WITH ADAM STRAIGHT OR ANGLED STOVE PIPES
≥50mm

04
INSTALLATION
FITTING THE LOG STORE (supplied separately)
*Images for illustrative purposes only
1. For products with feet only.
For products without feet, move straight to
Step 2.
NOTE: REMOVE THE BURNER BEFORE LAYING
THE STOVE ON ITS BACK
Lay the stove on its back and remove the
4 x feet from the stove using a screwdriver.
2. Position the log store in the desired place.
Then, carefully lift the stove and place it onto the log store.