Fireplace Doors Online FT010BT User manual

26’’ ROUND FIRE PIT
Please check all packing material carefully before discarding, as some
parts may be encased in the packing material.
Part List:
Part List
Description
Qty.
Drawings
A
Fire Bowl
1
B
Leg
3
C
Log Grate
1
E
Mesh Lid
1
F
Lid Ring with Nut
1
G
Handle
4
H
Bolt (M6x8)
10
I
Support Bar
4
J
Poker
1
J
Allen Wrench
1
Tool required: Allen Wrench (provided)
Special Warnings
Check local bylaws before using the fire pit.
This fire pit is intended for Outdoor Use Only! DO NOT use on wooden decks.
This fire pit is intended to burn Wood Logs Only! DO NOT burn coal, leaves or other
combustible materials in the fire pit.
NOT for use by children. Keep children and pets away from the fire pit.
Fire pit is hot, use with caution. NEVER touch hot fire pit with bare hands.
NEVER leave burning fire pit unattended and always extinguish fire completely before
leaving the fire pit.
Keep the fire pit at least 20 feet away from any flammable surface or dwelling.
DO NOT use near flammable or combustible objects or materials.
Only CHROMED PLATED COOKING GRID is intended for cooking.LOG GRATE is NOT
intended for cooking and SHOULD NOT be used for this purpose.
Always use gloves and protective glasses when loading the fire pit or extinguishing the fire.
Have a fire extinguisher available near the fire pit in case of emergency.
Operation Instructions
Place wood logs on grate and light with match. DO NOT overload logs.
Please use Poker (provided) when handling.
We do not recommend pouring water over the fire unless necessary. The fire should be
allowed to expire on its own.
Care and Maintenance
This fire pit is a quality-built product and is made to last for many years. The frame structure of
this unit is made of powder-coated steel extrusion and should resist rusting under normal use.
Should rusting occur, we suggest using a steel brush on the affected area followed by a spray
coating of high temperature anti-rust paint. For additional rust proofing of the bowl, grate and
mesh lid we recommend that a coat of high temperature primer (such as rustoleum or similar
brand) is applied before use. You may cover the fire pit with a Protective Cover (not provided)
when the fire pit is not in use. Ensure the fire pit has completely cooled down before using the
Protective Cover.

26’’ Round Fire Pit
Assembly Instruction:
DO NOT over tighten the hardware.
Step 1) Attach the Legs (B) to the Fire
Bowl (A) by using bolts (H). Finger
Tighten and do not fully tighten all
bolts.
Step 2) Attach Support Bar (I) to the
Fire Bowl (A) by using bolts (H). Then
attach the Handle (G) to another hole
of the Fire Bowl by using Bolts (H).
Tighten all the bolts accordingly with
the provided Allen Wrench until all
pieces fit together securely , Put Log
grate C) into the Fire Bowl (A)
Step 3) Affix Lid Ring (F) to the Mesh
Lid (E) by screwing the lid ring into the
upper hole of the mesh lid. Then
place the mesh lid on the Fire Bowl
(A).
WARNING!
The use of alcohol, prescription or non-prescription drugs may impair the
ability to properly assemble or safely operate this fire pit.
When using this fire pit, exercise the same precautions you would with any
open fire.
Do not use this fire pit for indoor heating. Toxic carbon monoxide fumes
can accumulate and cause asphyxiation or death.