Fisher & Paykel DD24SCB7 User manual

Preference Options
You can change the setting of these options to suit your preferences or circumstances.
You can change the setting of these options to suit your preferences or circumstances. We recommend selecting the
most suitable settings before you start using your . dishwasher.
Option What does it do?
Rinse aid Regulates the amount of rinse aid dispensed. Reduce this setting if there is excess foam after a wash.
Increase this setting if dishes are wet or streaky after a wash.
Water
softener* Refer to the ‘Water softener’ section of the ‘User guide’ for details.
Open
drawer
auto
power-on
Your dishwasher is factory-set to automatically power on for 30 seconds whenever you open the
drawer. You can turn this setting off.
Beeps at
end of
wash
Your dishwasher is factory-set to beep six times at the end of a wash. You can turn this setting off.
Closed
drawer
autolock
When this setting is on, the drawer will automatically lock 30 seconds after it’s closed. It can then be
unlocked by pressing
(unless Keylock or Childlock is also activated). Useful in boats or motor homes.
Clean dish
indication
When this setting is on,
will remain in the display after a wash to remind you that the dishes are clean. This is useful if you
prefer storing clean dishes in your dishwasher, taking out only what you need. When the last clean
dish has been removed, press
to return to normal operating mode.
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/…
Updated: Sat, 28 Jan 2023 07:52:52 GMT
Powered by
1

How to change the setting of an option
Check & Open
• Check that there is no wash underway, press
, then open the drawer.
Enter Menu & Scroll to Option
To enter the menu: press the
selector on top first with one finger, then the
button on the front with another finger, hold both until one long beep sounds, then release.
• You are now in the Rinse aid option of the preference options menu.
• If you want to change the Rinse aid setting, go to step 3 now.
• If you want to change the setting of another option, you will need to scroll to that option first.
To scroll to the next option: press
. To know which option you're in, watch the letters in the display (see the table below). When you have scrolled to the
end of the sequence, it will start again with Rinse aid (after the lower tone).
Option Which option am I
in?
Possible
settings Example
Rinse aid
1 to 5
4 indicators lit = setting is 4
Water softener*
0 to 5
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/…
Updated: Sat, 28 Jan 2023 07:52:52 GMT
Powered by
2

Option Which option am I
in?
Possible
settings Example
Open drawer auto power-
on
On or Off
Beeps at end of wash
On or Off
Closed drawer autolock
On or Off
Clean dish indication
On or Off
Change Settings
• Press
to change the setting within an option. For example, to change the Rinse aid setting from 4 (factory default) to 2,
you need to press
3 times.
Save Setting & Quit Menu
• Press
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/…
Updated: Sat, 28 Jan 2023 07:52:52 GMT
Powered by
3

. This will save the new setting and quit the preference options menu.
*This option is disabled on models without water softener. It appears in the sequence of options but
cannot be adjusted.
https://producthelp.fisherpaykel.com/us/Clean/DishDrawer%E2%84%A2/Single/DD24SCB7/Quick_Start_Guide_DD24SCB7/…
Updated: Sat, 28 Jan 2023 07:52:52 GMT
Powered by
4