Fisher & Paykel DW60UZ6B Operating instructions

Dishwasher Will Not Start
Possible Cause What to Do
Power supply is not
connected Ensure the dishwasher is plugged in and the power supply is turned on at the wall.
The door is not closed
properly Ensure the door is firmly closed.
Start/Pause button
has not been pressed
Press the Start/Pause button
Water tap not turned on Ensure water is connected and turned on.
Blocked strainer in water inlet
hose
Check the strainer and clean if necessary, it is located where the water inlet hose
screws into the tap.
Keylock or Childlock feature
is on The Keylock feature has been activated,Click for Instructions on your Model.
Inlet hose The inlet hose may be kinked, check your Installation manual for instructions on
inlet hose.
Still Need Help?
You may need assistance from one of our qualified service technicians.
Click on the button below to schedule a visit.
BOOK A SERVICE
or Contact Us
https://producthelp.fisherpaykel.com/nz/Clean/Dishwashers/DW60UZ6B/Troubleshooting_and_Fault_Codes/Troubleshooting…
Updated: Mon, 08 May 2023 00:37:08 GMT
Powered by
1

https://producthelp.fisherpaykel.com/nz/Clean/Dishwashers/DW60UZ6B/Troubleshooting_and_Fault_Codes/Troubleshooting…
Updated: Mon, 08 May 2023 00:37:08 GMT
Powered by
2