Fisher & Paykel QUICKSMART MW60 User manual

Getting started quickly — QuickSmart washer
Failure to follow the advice in this guide may result in damage to your garments, and your expectations of wash
performance may not be met.
Before you start
• It is important to sort your clothes, particularly separating white/light colours from dark colours, as well as
separating out sheets and towels. (refer to the ‘Sorting and Loading’ sections).
• Wash new, highly coloured and dark coloured items separately to prevent dye transfer onto other items.
• Sort lint givers and lint collectors (refer to the ‘Sorting’ section).
• Close bra clasps, do up zippers and check pockets.
• Place your clothes directly into the wash bowl.
• Place the load evenly around the agitator (refer to ‘Sorting and Loading’).
• Remove fabric softener dispenser cup.
Detergent
• Follow the manufacturer’s instructions on the detergent
package.
• Use the size of the load as a guide to the amount of
detergent to use (refer to the ‘Detergent’ section).
• Pour the detergent down the centre of the agitator stem.
• Replace the fabric softener dispenser cup (this stops
small articles falling down the centre of the agitator).
https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/QuickSmart/MW60/User_Guide_MW60/06_Getting_started_quic…
Updated: Thu, 11 Nov 2021 20:21:52 GMT
Powered by
1

Fabric softener
If you wish to use fabric softener, place it in the fabric softener dispenser cup on the top of
the agitator (refer to the ‘Fabric softener’ section).
Fabric softener must not be used if you have selected the
‘Eco’ option (refer to the ‘Fabric softener’ section).
Using your washer
1. Press ‘Power’
to activate your QuickSmart™ washer.
2. Select your desired wash cycle by pressing the wash cycle button of your choice (refer to ‘Wash cycles’
section).
3. Choose your wash options, eg you may want a ‘Warm’ wash temperature and a ‘Slow’ spin speed (refer to the
‘Wash options’ section).
4. Use
to advance through to the desired part of the wash cycle.
5. Press
to start the cycle. The washer will start to fill with water and select the correct wash action for your load.
For best fabric and colour care, remove your clothes as soon as the cycle has finished.
https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/QuickSmart/MW60/User_Guide_MW60/06_Getting_started_quic…
Updated: Thu, 11 Nov 2021 20:21:52 GMT
Powered by
2

If you wish to stop your QuickSmart™ washer
• Press
.
During a spray rinse or spin, there will be a slight delay while the bowl slows to a stop and the lid is unlocked.
Failure to follow the advice in this guide may result in damage to your garments, and your
expectations of wash performance may not be met.
https://producthelp.fisherpaykel.com/nz/Wash/Top_Loaders/QuickSmart/MW60/User_Guide_MW60/06_Getting_started_quic…
Updated: Thu, 11 Nov 2021 20:21:52 GMT
Powered by
3