FITUEYES DS212001WB User manual

Dear customer:
Thanks for your purchase in our store. Any questions, please contact us via support@fitueyes.com with below details:
1.Purchase platform & order number
2.Model number & Instruction version#
3.The detailed photo (faulty part, damage part, if some parts are missing, please circle it/them on the manual instruction) and send us.
We’ll reply as soon as we receive your message(usually within 24 hours).
お客様
この度、当店の商品をご注⽂いただきありがとうございました。何か問題点がございましたら、下記の情報を提供し各プラットフォームのメセ
ッジ或いはメールを通じお気軽にお問い合わせください。メールアドレスはsupport@fitueyes.com
1.注⽂プラットフォームと注⽂番号
2.商品型番と説明書バージョン
3.ディーテール写真（違う部品、不良品、⽋品など、説明書での写真も指摘してください）を送ってください
4.返⾦或いは部品発送が欲しいかを予めにコメントしてください
メセッジ/メールを受信するとできるだけ早く回復致します。
[e-mail]
www.fitueyes.com
ISSUED: 2020.1-1
for visual
enjoyment
MEDIA SHELF
MODEL
DS212001WB
DS212002WB

[e-mail] www.fitueyes.com 1-2
Pencil
Screw
driverHammer
Drill
Wood Drill
Φ11mm (7/16"）
（5/32"）
Wood Drill
Φ4mm
Stud finder
Ax2Bx1Cx2Dx1
Ex2Fx1Gx1Hx28
Ix28 Jx16 Kx20
Px2Ox2
Tx2Sx1Rx8
Tools Requried
(Not included)
What's in the box

What's in the box
3
This illustration shows how the CAM fastening system works.
Esta ilustración muestra como funciona el sistema de fijación de leva.
Cette illustration montre comment le système de fixation de
la CAME fonctionne .
WARNING
·Make sure that mounting screws are anchored into the center of the studs. The use of
a stud finder is highly recommended.
· Installers are responsible to provide hardware for other types of mounting situations.
· Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
Stud Finder Pencil Drill
Φ4mm
（5/32 "）
Wood Drill
Screw
driver
Drill pilot holes
3
location of mounting holes
Find and mark the exact
2
1
. Wood Stud Wall Mounting Fit for 406mm(16")stud
1a
Screw on the wall P
Tools Required
(Not included)
QLevel
B
P
50mm
(2")
Φ4mm
（5/32"）
25mm
(1")
4

4 5
Secure wall anchors
O into drilled holes
with hammer
Pencil Drill Φ11mm
（7/16 "）
Wood Drill
Screw
driverHammer
50mm
(2")
Φ11mm
（7/16"）
25mm
(1")
WARNING
· Installers must verify that the supporting surface will safely support the combined
weight of the equipment and all attached hardware and components.
. Solid Brick and Concrete Mounting
1b
Drill pilot holes
of mounting holes
Mark the exact location
2
1
B
P
O
QLevel
Tools Required
(Not included)
34
Screw on P
the wall
Easy to install
2
· Screw cam bolts(H) insert into panels(A)
· Insert dowels(J) into panels(A)
x28
H16
J
2

What's in the box
7
6
3
· Attach panels（C,D,E）to panel（A）
· Then insert and secure cam lock(G) to panels (C,D,E) to lock it
· Insert part(T) to panel (A)
4
· Attach panel（B）to panel（A）
Then insert and secure cam lock(I) to panel (B) to lock it
T
E
C
D
C
E
x10
I
x4
I
B

Easy to install
98
5
· Attach panel（A）to panels（B,C,D,E）
· Insert part(T) to panel (A)
· Then insert and secure cam lock(I) to panels (B,C,D,E) to lock it
G
6
· Secure cam cover (K) on cam lock(I)
T
I
C
C
B
D
E
K
C

Easy to install
7
· Attach panel(F,G) onto parts(R)
· Hang the cabinet onto the screws(P) carefully
· Secure parts(L) onto the screws(P)
8
Jx2
R
· Insert parts(R) to panels (C,D)
C
C
D
F
G
9

Easy to install
· Secure parts(M) onto the screws(P)
then screws and tighten screws(P)
Part(M) must be installed correctly to ensure safe use.
· Secure parts(N) onto
the parts(L)
· Final Assembly
Nx2
Mx2
10
LEFT RIGHT
11