FiveCo CDE5 User manual

CDE5 Specifications

F ABBRICA ITALIANA VEICOLI ELETTRICI
1
Contents
1、About the User Manual................................................................................ 2
2、Characteristics.............................................................................................. 2
3、Functions...................................................................................................... 2

F ABBRICA ITALIANA VEICOLI ELETTRICI
2
1、About the User Manual
Dear users,
to ensure better performance of your e-bike, please read carefully through the
CDE5 Specifications before using it.
2、Characteristics
Dimension in Figure 1: (unit: mm)
Figure 1
3、Functions
a. While the display is off, press and hold the power button for 2 seconds to turn on
the power.
b. Press the power button for 5 seconds to turn off the power.
c. With the display on, press the “+”to increase or “-“ to decrease the assistance
level, visible on the right side. There are 5 assistance levels:
-No LED: level 0 (no assistance)
-One flashing green LED: level 1
-One steady green LED: level 2
-One steady and one flashing green LEDs: level 3
-Two steady green LEDs: level 4
-Three steady green LEDs: level 5

F ABBRICA ITALIANA VEICOLI ELETTRICI
3
d. While the display is on, hold to activate Walking Assisted Mode. This mode
will help you push the ebike by foot up to a maximum of 6 km/h speed (while in 0
assistance level, it can be activated also with the throttle)
e. The residual charge of the battery is visible on the left side of the display:
-Three steady green LEDs: 100%
-Two steady green LEDs: 50%
-One steady green LED: 25%
-Flashing red LED: 10%
f. With screen on and two flashing red LEDs, please contact immediately the
Technical Support to report malfunctions.
Buttons:
Power Button
Increase Assistance Level
Decrease Assistance Level
Walking Assisted Mode (if held)
Throttle (only in 0 Assistance Level)