Flash butrym LED PAR 36 12xUV User manual

User Manual
Instrukcja Obsługi
F7100328
LED PAR 36 12xUV

Please keep this User Manual for future
      
another user, be sure that they also receive
this instruction booklet.
Unpack and check carefully there is no
transportation damage before using the

Before operating, ensure that the voltage
and frequency of power supply match the

It’s important to ground the yellow/green
conductor to earth in order to avoid electric
shock.
Disconnect main power before servicing
and maintenance.


only, but always by taking its base.

IMPORTANT!

at the LED PAR, as intense illumination can
damaged the display.
Don’t operate it where the temperature is
higher than this.
In the event of serious operating problem,
     

carried out by unskilled people can lead to
damage or malfunction. Please contact the
nearest authorized technical assistance
center. Always use the same type spare
parts.
Do not connect the device to any dimmer
pack.
Do not touch any wire during operation
and there might be a hazard of electric
shock.
To prevent or reduce the risk of electrical

rain or moisture.

visibly damaged.
Do not look directly at the LED light spot

2. SAFETY INFORMATION
1. INTRODUCTION
LED PAR 36 12xUV

WARNING!
User Manual •Instrukcja Obsługi
Figure 2.


LED PAR 36 12xUV •Art No F7100328
       
holes on the bracket. Always ensure that
       
and slipping while operating. Always
ensure that the structure to which you are
attaching the unit is secure and is able to

5.1 Connecting DMX signal
     

4. INSTALLATION
5. CONNECTION
3. PRODUCT INFORMATION
weight. Also always use a safety cable that
can hold 12 times of the weight of the unit



of people and has no one pass by or under
it.
      



1
3
22
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
3
1
CAUTION!     
DMX signal has to be terminated with a



DMX
Controller DMX 512 DMX 512
1
FEMALE
XLR
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45


Light source: 12pcs x 3W UV LEDs
Power supply: AC 100V/240V 50/60Hz,
Power Consumption: 36W
Signal: DMX 512






The connection is performed using

(included). The device must be
operated by qualified personnel.
5.2 Voltage specification
Input Voltage Total Power Frequency
100-240V 36W 50/60Hz
5.3 Connecting power supply
CAUTION! In the case of cable damage do not attempt to repair.

a person with appropriate permissions.
Make sure that the power grid supply
parameters are consistent with device
parameters and limitations are not

Using lamp, the change rate of power voltage should be within
± 10%, if the voltage is too high, it will shorten the light’s life; if it’s


reduce the life span of lamps and bulbs; intermittent using will
improve the life of bulbs and lamps.
User Manual •Instrukcja Obsługi

6. DMX CHANNELS
Mode Value Description
DMX d001-d512 8 channels DMX mode to select the
starting address
Master/Slave IP.01-IP.64 Master/Slave (64 units maximum)
Static Color A1.01-A1.10 Select the LED position
Auto Program A2.01-A2.32 Adjust hopping speed (slow to fast)
Fade Mode
A3.01-A3.19
(Press ENTER to turn
the below value)
A3.01-A3.32 Adjust hopping speed (slow to fast)
Sound Active
Mode
A4.01-A4.19
(Press ENTER to turn
the below value) Select sound-active program
A4.01-A4.04 Adjust sound-activated sensitivity
Strobe Mode
A5.01-A5.19
(Press ENTER to turn
the below value) Select the LED position
A5.01-A5.32 Adjust strobe speed (slow to fast)
Static Color
Dimmer
r000-255
Adjust the brightness of different LED
position
g000-255
b000-255
U000-255
LED PAR 36 12xUV •Art No F7100328

OSTRZEŻENIE!
WAŻNE!



Rysunek 2. 

User Manual •Instrukcja Obsługi
CH Function Value Description
1
No Function 0-10
Static Color 11-50 + CH2 to Select LED Position
Auto-Play 51-100 +CH3 to Adjust Speed
Fade 101-150 +CH2 to Select LED Position
+CH3 to Adjust Speed
Sound-Active 151-200
Strobe 201-255 +CH2 to Select LED Position
+CH3 to Adjust Speed
2 Different LED Position 0-255
3 Speed Adjustment 0-255 Slow to Fast
4 Dimmer for 5-7 CH 0-255
0-100%
5 Position 1 0-255
6 Position 2 0-255
7 Position 3 0-255
8 Position 4 0-255

2. ZASADY BEZPIECZENSTWA
3. INFORMACJE O PRODUKCIE
4. INSTALACJA
    LED PAR 36 12xUV  
  


przez wykwalifikowany personel, aby
  

    


    
    

   


     


     
  

    

    
w dobrze wentylowanym pomieszczeniu,
     

     
     



   
     
    

uszkodzenia spowodowane niestabilnym

    
      
   
     
    
   

    

LED PAR 36 12xUV •Art No F7100328
Źródło Światła: 12pcs x 3W UV LEDs
Zasilanie: AC 100V/240V 50/60Hz,
Pobór mocy: 36W
Sygnał: DMX 512





1. WPROWADZENIE

User Manual •Instrukcja Obsługi
5.2 Specyfikacja zasilania

Napięcie Zasilania Pobór Mocy Częstotliwość zasilania
100-240V 36W 50/60Hz

    
    

5. POLACZENIA






1
3
22
ŻEŃSKI
XLR
GROUND
DMX +
DMX -
MĘSKI
XLR
3
1
    




UWAGA! 


wykwalifikowany personel techniczny.
    
    
     
  

ŻEŃSKI
XLR
1
GROUND
DMX +
DMX -
MALE
XLR
2
3
4
5
1
2
3
45


DMX
Controller DMX 512 DMX 512

6. LISTA KANALOW DMX
LED PAR 36 12xUV •Art No F7100328
Mode Value Description
DMX d001-d512 8 channels DMX mode to select the
starting address
Master/Slave IP.01-IP.64 Master/Slave (64 units maximum)
Static Color A1.01-A1.10 Select the LED position
Auto Program A2.01-A2.32 Adjust hopping speed (slow to fast)
Fade Mode
A3.01-A3.19
(Press ENTER to turn
the below value)
A3.01-A3.32 Adjust hopping speed (slow to fast)
Sound Active
Mode
A4.01-A4.19
(Press ENTER to turn
the below value) Select sound-active program
A4.01-A4.04 Adjust sound-activated sensitivity
Strobe Mode
A5.01-A5.19
(Press ENTER to turn
the below value) Select the LED position
A5.01-A5.32 Adjust strobe speed (slow to fast)
Static Color
Dimmer
r000-255
Adjust the brightness of different LED
position
g000-255
b000-255
U000-255

CH Function Value Description
1
No Function 0-10
Static Color 11-50 + CH2 to Select LED Position
Auto-Play 51-100 +CH3 to Adjust Speed
Fade 101-150 +CH2 to Select LED Position
+CH3 to Adjust Speed
Sound-Active 151-200
Strobe 201-255 +CH2 to Select LED Position
+CH3 to Adjust Speed
2 Different LED Position 0-255
3 Speed Adjustment 0-255 Slow to Fast
4 Dimmer for 5-7 CH 0-255
0-100%
5 Position 1 0-255
6 Position 2 0-255
7 Position 3 0-255
8 Position 4 0-255
User Manual •Instrukcja Obsługi

LED PAR 36 12xUV •Art No F7100328

www.flash-butrym.pl
F7100328