
4
1.0 BG3EI
1.1 Description
The BG3EI is a low power wireless response base. The BG3EI is used to interact with an audience so they can
provide real time feed back to questions. It communicates at 2.4GHz, GFSK to keypads. The base unit polls
keypads, and displays result.
The overall operation of the BG3EI is controlled by a microcontroller. This microcontroller is powered from
approximately 3.3V, and uses its own 16 MHz reference. The microcontroller handles control of the RF
communications, EEPROM, LED, and USB communications.
RF communications use the Nordic 24L01+ 2.4 GHz transceiver, a power amp, and LNA. The Nordic chip uses its
own 16 MHz reference oscillator. The Nordic, power amp, and LNA are powered from 3.3V. The Nordic
transceiver uses an integral PCB antenna.
1.2 FCC, IC, and EU Compliance Information
BG3EI Low Power Wireless Response Base
Responsible Party Pertaining to the Declaration of Conformity
Fleetwood Group, Inc.
11832 James Street
Holland, MI 49424
Attn: Product Service Coordinator
Phone: 888-467-3759
1.3 Standards and Guidelines
This device complies with the following European Directives and USA/Canada Regulations:
¾Directive 1999/5/EC on radio equipment and telecommunication terminal equipment and the mutual
recognition of their conformity
¾Directive 2006/95/EC on the harmonization of laws of member states related to electrical equipment
designed for use within certain voltage limits
¾The USA Federal Communications Commission (FCC) Rules and Regulations
¾Industry Canada Rules and Regulations
This device complies with the following national and international standards:
¾EN 301 489-1 V1.8.1
¾EN 301 489-17 V1.3.2
¾EN 300 328 V1.7.1
¾EN 60950-1: 2006
¾FCC 15B, 15.247: 10-01-08
¾IC RSS-210 Issue 7
1.4 FCC/IC Compliance
This device complies with Part 15 of the FCC Rules and RSS-210 of the Industry Canada Rules. Operation is
subject to the following two conditions: (1) this device may not cause interference and (2) this device must accept
any interference, including interference that may cause undesired operation of the device. The user is cautioned that
changes or modifications to the device that are not approved by the manufacturer could void the user’s authority to
operate the device.