Flepcher FLP-MIA910 User manual

The MIA-910 10W Mini Amplifier packs enough punch to be applied in various audio installation where reliable
functions and sound quality are a must. Due to its rugged and ecient design the MIA-910 is a perfect candidate
for various challenging installations. It accepts standard line level, unbalanced signal from conventional consumer
devices such as CD/DVD player, television monitor, tape and tuners. The input signal will be summed to mono
via internal resistive network.
FLP-MIA-910
10W Mini Amplifier
• 10W RMS stereo amplifier
• Extreme compact size
• Rugged steel housing
• RCA unbalanced line level inputs (L/R summed to mono)
• Detachable, phoenix-style screw terminal speaker outputs
• Attached brackets for easy wall mounting
• Can be installed behind flat panel monitor to power local speakers
• Equipped with audio program that works seamlessly with digital signage display
• Powering additional zones on top of existing distribution of audio system
• Suitable for installation in kiosk, retail display area, gaming and vending machine outlet, classroom,
especially where video projectors are used.
Product Features
Power Output
Frequency Response
Total Harmonic Distortion (THD)
Power Requirements
Dimensions (H X W X D)
Weight
Finish
Specifications
10W driven at 4ohms
50Hz ~ 18KHz
0.1% @ 1kHz
12VDC, AC adaptor supplied
56 X 147 X 141mm
0.64kg
Black
Audio input
DC power input Speaker output
terminal
Volume control
Portable Sound System Mixer Amp/ Pre Amp/ Power Amp Paging Microphone
& Zone selector Rack mount equipment
14

1
10 Watts RMS
Mini Amplifier

2
Safety Information
The lightning bolt
within a triangle is
intended to alert the
user to the presence
of un insulated
dangerous voltage
levels within the
product’s enclosure.
This voltage may be of
sufficient magnitude
to constitute an
electric shock risk.
To reduce the risk of electric
shock, do not remove cover
of this device. There are no
user serviceable parts
inside. Refer servicing only
to qualified service
personnel.
The exclamation point
within a triangle is
intended to alert the
user to important
operating and
maintenance
(servicing)
instructions in the
literature
accompanying the
appliance.
Safety Precautions
• Read and retain these instructions
• Follow all instructions and heed warnings
• Do not use this device near water
• If the surface becomes dirty, clean only with dry cloth, do not use solvents
or thinners
• Install in accordance with the manufacturer’s instructions
• Do not block ventilation openings
• Do not install near heat sources such as radiators, heat registers, stoves, or
other devices that produce heat
• Do not defeat the safety purpose of the grounded plug. This plug has two
blades and a third ground prong. The wide blade or third prong are provided
for your safety. If the provided plug does not fit into your outlet, consult an
electrician for replacement of the obsolete outlet
• Protect the power cord from being stressed at the plugs, convenience
receptacles, and where they exit the amplifier
• Only use accessories specified by the manufacturer
• Unplug the device during lightning storms or when unused for an extended
time
• Refer all servicing to qualified personnel
• This device must not be exposed to water in any way. No object filled with
liquids should be placed on apparatus

3
Congratulations on your purchase of this
This amplifier was designed specifically for use in permanent audio installations, where high
reliability and premium sound quality are a must. Highly rugged construction and high efficiency
design make this amplifier perfect for continuous duty applications in situations were power will be
left on for indefinite periods of time.
This amplifier is warranted from defects for one year from the date of purchase. Should your
amplifier require service, either within or beyond
This unit includes a host of features, along with an impressive list of specifications, which are
detailed over the next pages. Please take the time to read this document completely prior to
installation of this product. Should you have questions regarding installation or operation of this
Features


Rugged steel housing
Volume (gain) control
RCA unbalanced line level inputs (L/R summed to mono)
Detachable, phoenix style screw terminal speaker outputs
Attached brackets for easy wall mounting
Specifications

Frequency Response: 50Hz ~ 18KHz
Total Harmonic Distortion (THD): 0.1% @ 1kHz

Dimensions: 56mm (H) x 147mm (W) x 141mm (D)
Weight: 0.64kg.
Applications
Installation behind flat panel monitors to power local speakers
Kiosk and retail displays
Powering additional zones on an existing distributed audio system
Audio program material for digital signage installations
Classroom installations, especially where video projectors are used
Gaming & Vending machines
10W RMS stereo amplifier
Power Output: 10W driven at 4ohms
unit, please contact the Technical Support Department.
Power requirements: 12VDC, AC adaptor supplied
Series Mini Amplifier
Extreme mini size

4
Connections & Controls:
1. DC Power Input
2. Power ON/OFF Switch – Turns amplifier power on or off. When on,
the blue LED by the input connections will illuminate.
3. Speaker Output Connection – Detachable Phoenix style connector
may be removed from the amplifier for easy access & wiring. Screw
type terminals will accept up to 14AWG wire. Also, as this is a floating
output, no speaker connections may be tied to chassis or earth
ground. Minimum speaker impedance 4Ω
4. Power LED – Indicates presence of input voltage when Power Switch
is in the On position.
5. Audio Input Connection – Accepts standard line level, unbalanced
signals from conventional consumer devices such as CD/DVD players,
television monitors, tape decks and tuners. Note: The input signal is
summed to mono via an internal resistive network.
6. Level Controls - Sets output level for the amplifier. When the
amplifier is operating in bridged mono mode, only the right control is
used. Care should be taken to avoid running the amplifier or speaker
system into distortion as this could cause damage to one or both.
100~240V AC, 50~60Hz input range.

5
Technical Specification
Compliance
When this product reaches the end of its life, do not dispose with household waste.
See www.recycle-more.co.uk for details of
environmentally sound
Warranty
This warranty will not cover damage due to improper use such as (and not limited
to) damaged cones, mounting frames, voice coils or items damaged by whether
damaged items.
how to dispose of products in an
fashion.
Products are warranted, against manufacturer defects for a period of one year from
the original date of purchase. This warranty is limited to manufacturer defects, in
either materials or workmanship. Any other worldwide divisions of Premier Farnell
PLC, is not responsible for any consequential or inconsequential damage to any
other component, structure or the cost of installation or removal of said items.
Defective items should be returned to the retailer from whom they were originally
purchased.

MANUFACTURER / IMPORTER TEST LABORATORY
This is the result of test, that was carried out from the
submitted type-samples of a product in conformity with the
specification of the respective standards.
The declaration holder has the right to fix the CE-mark for
EMC on the product complying with the inspection sample
09 August 2014
(Date) (Date)
(Surname, forename) (Company stamp)
(Company stamp) CTS (Ningbo) Testing Service Technology Co., Ltd.
NB test site:2/F., South Tower, Huoju Building, No.181, Canghai
Road, Jiangdong Science and Technology Park, Ningbo,
Zhejiang, China
GZ test site: A101, No.65, Zhuji Road, Tianhe District, Guangzhou, Guangdong, China
CTS (NINGBO) TESTING SERVICE TECHNOLOGY
OPERATE ACCORDING TO ISO/IEC 17025
EC DECLARATION OF CONFORMITY
EU - ELECTROMAGNETIC COMPATIBILITY DIRECTIVE -
This declares that the following designated product
Channel Class-D Power Amplifier
Model No.: FLP-PA4500D, FLP-PA1120D, FLP-PA1240D, FLP-PA1350D,
FLP-PA1500D, FLP-PA2120D, FLP-PA2240D, FLP-PA2350D,
FLP-PA2500D, FLP-PA4120D, FLP-PA4240D, FLP-PA4350D,
FLP-MIA910 Brand Name: FLEPCHER
（Product identification）
Complies with the essential protection requirements of the European Parliament and of the
Council Directive 2004/108/EC on the approximation of the laws of the Member States relating
to electromagnetic compatibility.
This declaration applies to all specimens manufactured in accordance with the attached
manufacturing drawings which form part of this declaration.
Assessment of compliance of the product with the requirements relating to electromagnetic
compatibility was based on the following standards:
EN 55013: 2013
EN 61000-3-2: 2006+A2:2009, EN 61000-3-3: 2013
EN 55020:2007+A11 :2011
(Identification of regulations / standards)
This declaration is the responsibility of the Applicant / importer
Flepcher Sdn Bhd
9, Jalan Kenari 10, Bandar Puchong Jaya, 47100 Puchong,
Selangor, Malaysia
(Name / Address)
THIS DOC IS ONLY VALID IN CONNECTION WITH TEST REPORT NUMBER: CGZ3140702-00694-E-D