Flepcher FLP-CD-930 User manual

Please follow the instructions in this manual to obtain the optimum results from this unit.
We also recommend that you keep this manual handy for future reference.
OPERATION MANUAL
TM
PROFESSIONAL PUBLIC ADDRESS SYSTEM
CD + TUNER PLAYER
FLP-CD930
REMOTE
AM/FM DTS TUNER
PREV NEXT USB/CD EJECT PLAY STOP PLAY
MODE MUTE
S D
USB
UP
6
AUTO/
MANUAL
5
4
MEM
3
ST/MON
A/F/B
2
1
DOWN
POWER
CD PLAYER
IR STATUS
CD + TUNER PLAYER
FLP-CD930

TABLE OF CONTENTS
2
1. SAFETY PRECAUTIONS .......................................................................................3
2. FEATURES ...............................................................................................................5
3. NOMENCLATURE AND FUNCTIONS
3.1 Front Panel .......................................................................................................... 5
3.2 Real Panel ............................................................................................................ 6
3.3 Remote control .....................................................................................................6
4. CONTROL INSTRUCTION..................................................................................... 7
5. .................................................................................................. 8BLOCK DIAGRAM
6. .................................................................................................. 9SPECIFICATIONS

Be sure to read the instructions in this section carefully before use.
Make sure to observe the instructions in this manual as the conventions of safety symbols and messages
regarded as very important precautions are included.
We also recommend you keep this instruction manual handy for future reference.
Safety Symbol and Message Conventions
Safety symbols and messages described below are used in this manual to prevent bodily injury and property
damage which could result from mishandling. Before operating your product, read this manual first and
understand the safety symbols and messages so you are thoroughly aware of the potential safety
Indicates a potentially hazardous situation which, if mishandled, could
result in death or serious personal injury.
Indicates a potentially hazardous situation which, if mishandled, could
result in moderate or minor personal injury, and/or property damage.
When Installing the Unit
Do not expose the unit to rain or an environment
where it may be splashed by water or other liquids,
as doing so may result in fire or electric shock.
Use the unit only with the voltage specified on the
unit. Using a voltage higher than that which is
specified may result in fire or electric shock.
Do not cut, kink, otherwise damage nor modify the
power supply cord. In addition, avoid using the
power cord in close proximity to heaters, and never
place heavy objects -- including the unit itself -- on
the power cord, as doing so may result in fire or
electric shock.
Be sure to replace the unit's terminal cover after
connection completion. Because high voltage is
applied to the speaker terminals, never touch these
terminals to avoid electric shock.
Be sure to ground to the safety ground (earth)
terminal to avoid electric shock. Never ground to a
gas pipe as a catastrophic disaster may result.
Avoid installing or mounting the unit in unstable
locations, such as on a rickety table or a slanted
surface. Doing so may result in the unit falling
down, causing personal injury and/or property
damage.
When the Unit is in Use
Should the following irregularity be found during
use, immediately switch off the power, disconnect
the power supply plug from the AC outlet and
contact your nearest dealer. Make no FLEPCHER
further attempt to operate the unit in this condition
as this may cause fire or electric shock.
If you detect smoke or a strange smell coming
from the unit.
If water or any metallic object gets into the unit
If the unit falls, or the unit case breaks
If the power supply cord is damaged (exposure of
the core, disconnection, etc.)
If it is malfunctioning (no tone sounds.)
To prevent a fire or electric shock, never open nor
remove the unit case as there are high voltage
components inside the unit. Refer all servicing to
your nearest dealer. FLEPCHER
Do not place cups, bowls, or other containers of
liquid or metallic objects on top of the unit. If they
accidentally spill into the unit, this may cause a fire
or electric shock.
Do not insert nor drop metallic objects or flammable
materials in the ventilation slots of the unit's cover,
as this may result in fire or electric shock.
1. SAFETY PRECAUTIONS
3

An all-pole mains switch with a contact separation of at least 3 mm in each pole shall be incorporated in
the electrical installation of the building.
When Installing the Unit
Never plug in nor remove the power supply plug
with wet hands, as doing so may cause electric
shock.
When unplugging the power supply cord, be sure
to grasp the power supply plug; never pull on the
cord itself. Operating the unit with a damaged
power supply cord may cause a fire or electric
shock.
When moving the unit, be sure to remove its power
supply cord from the wall outlet. Moving the unit
with the power cord connected to the outlet may
cause damage to the power cord, resulting in fire or
electric shock. When removing the power cord, be
sure to hold its plug to pull.
Do not block the ventilation slots in the unit's cover.
Doing so may cause heat to build up inside the unit
and result in fire.
Avoid installing the unit in humid or dusty locations,
in locations exposed to the direct sunlight, near the
heaters, or in locations generating sooty smoke or
steam as doing otherwise may result in fire or
electric shock.
When the Unit is in Use
Do not place heavy objects on the unit as this may
cause it to fall or break which may result in
personal injury and/or property damage. In
addition, the object itself may fall off and cause
injury and/or damage.
Make sure that the volume control is set to
minimum position before power is switched on.
Loud noise produced at high volume when power is
switched on can impair hearing.
Do not operate the unit for an extended period of
time with the sound distorting. This is an indication
of a malfunction, which in turn can cause heat to
generate and result in a fire.
Contact your dealer as to the cleaning. FLEPCHER
If dust is allowed to accumulate in the unit over
a long period of time, a fire or damage to the unit
may result.
Switch off the power, and unplug the power supply
plug from the AC outlet for safety purposes when
cleaning or leaving the unit unused for 10 days or
more. Doing otherwise may cause a fire or electric
shock.
SAFETY PRECAUTIONS
If dust accumulates on the power supply plug or in
the wall AC outlet, a fire may result . Clean it
periodically. In addition,insert the plug in the wall
outlet securely.
4
Due to product upgrades, while some of the features and specification in the user manual does not
match the actual functions, sorry for any inconvenience and thanks for your kind understanding!

2. FEATURES
3. NOMENCLATURE AND FUNCTIONS
3.1 FRONT PANEL
1.Input/output
2.Play
3.Stop
4.Single / full song cycle / normal playback
5. Previous song
6.Next song
7.USB mode / SD mode shift
8.Mute
9.Radio station number buttons 1-6
10.Power indicator
11.Power switch
12.Down
13. Up
14.Radio mode
(manual mode /automatic mode)
15.Storage
16.Mono / stereo shift
(not currently supported)
17.AM/FM/Bluetooth shift
18.SD card slot
19.USB interface
20. CD-ROM drive
5
NOTE:
The case has been connected with power cord, please insert power into the grounded power
grid, avoid static electricity interrupting to damage equipment.
1. Standard cabinet design (1U), black alumina brushed panel, humanized drawing, exquisite
craftsmanship, high-grade appearance.
2. Built-in USB interface / SD card slot, CD movement and radio, Bluetooth four audio sources.
CD player and MP3 player share one channel output, radio and Bluetooth share one channel
output.
3.CD adopts high-end suction movement.
4. The radio adopts a high-sensitivity radio module; AM / FM stereo two-band reception is
optional, and the radio frequency memory can be stored up to 99.
5. With infrared remote control function, it can independently control the volume.
6. Support 2.4G Bluetooth playback. The receiving distance is greater than 10 meters.
REMOTE
AM/FM DTS TUNER
PREV NEXT USB/CD EJECT PLAY STOP PLAY
MODE MUTE
S D
USB
UP
6
AUTO/
MANUAL
5
4
MEM
3
ST/MON
A/F/B
2
1
DOWN
POWER
CD PLAYER
IR STATUS
17
10
1245678
181920
9
1615141312
11
3

NOMENCLATURE AND FUNCTIONS
3.2 REAR PANEL
3.3 REMOTE CONTROL
6
ANT
FM
UNBAL/75Ω
AM
LOOP
ANT
TUNER CD PLAYER
AUDIO OUTPUT
R L R L
BT-AN T
22 23 25 26 21 24
21. AC power input;
22. FM external antenna;
23. AM external loop antenna;
24. Bluetooth external antenna;
25. Radio channel output; “R” is the right channel and “L” is the left channel.
26. CD channel output; “R” right channel, “L” left channel.
1.Power button
2.CD radio remote control
switch button
3.Number buttons 1 ~ 9
4.Number button 0
5.Play/pause button
6. Cycle button
7. OK button
8. Previous song
9.Rewind button
10.Volume + / - button
11.Manual / auto mode button
12. Previous channel
13.Radio auto / manual switch
button
14. Reduce frequency
15.Mono / stereo shift button
(Not currently supported)
16.Display the current channel
17.Direct input frequency
18.Save button
19.Increase frequency
20.AM/FM/Bluetooth shift button
21.Incremental frequency
modulation
22.Mute button
23.Left and right channel
adjustment buttons
 (Not currently supported)
24.Next song
25.Fast forward button
26.USB / CD shift button
27.Stop button
28. Channel + 10 button
29. EJECT button
电源
暂停 停止
确认
12 3
45 6
7 8 9
0/ 10 10 + 选时
设置
播放 返回
标题
快退
快进
上一曲
下一曲
音量+ 声道
根菜 单
放大
VG A
PB C 语音
音量-
字幕 角度
3D
屏显
重复
静音
制式
POWER
12 3
45 6
7 8 9
0
A/F /B
OPE N/
CLO SE
+10
PLAY/PA USE STO P
USB /CD
ENTER
LR
PR OGAM
SWI TCH F.INP UT MON O/ST ME M
AUT O ME M
AUTO /
MAN UAL
TUNER- TU NE R+
MU TE
CH - CH+
TU NER /C D
REPEAT
VO L+
VOL-
12
3
4
5
6
7
8
9
10
11
12
13
14
15
16 1718
1920
2122
23
24
25
26
27
28
29

4.CONTROL INSTRUCTION
CONNECTION:
1. Press the power switch, turn on the power. The power indicator lights up, the screen shows
CLOSE, the machine reads the disc status after 2 seconds, the screen shows CORD. If there
is no disc in the machine, the screen shows NO DISC.
2. Press the "EJECT" button on the panel, the screen shows OPEN, and the machine automatically
sends out the tray.
3. Place the disc on the tray.
4. Press the "EJECT" button again, the screen shows CLOSE, and the disc reads (CORD) after 2S.
5. After reading the disc normally, all discs will automatically play in a loop..
6. After pressing the stop key, the total track and total time display are stopped.
7. Press the Play button to play all loops again.
8. Insert a USB device or SD card, and press the USB / CD button on the remote control to read the
contents and operate it through the remote control or the function buttons on the panel.
(Note: USB devices support up to 8GB)
9. If there is no disc in the CD player, it will automatically switch to read USB device or SD card.
10. The effective range of the remote control should be within 6 meters, and the effective remote
control angle is ± 45 degrees.
11. Press the remote control to control the corresponding CD and MP3 functions.
12. Press the "A / F / B" key on the panel to select the Bluetooth mode. Turn on the Bluetooth of the
mobile phone. After FLP-CD930 device is searched, click to enter the default connecting
code: 8888. The mobile phone will automatically connect. After that, you can play your phone's
music normally.
7
ANT
FM
UNBAL/75Ω
AM
LOOP
ANT
TUNER CD PLAYER
AUDIO OUTPUT
R L R L
BT-AN T
Bluetooth external antenna
AM/FM tuner left channel output
AM/FM tuner right channel output
CD right channel output
CD left channel output
AC Connect power
Connect FM antenna
Connect AM antenna

Supply
PowerMCU
CD
Display
Tuner
Display
Tuner
Module
CD
Volume
Tuner
Volume
CD
Module
L
R
Volume OUTPUT
L
R
CD OUTPUT
AC power input
5. BLOCK DIAGRAM
8

6. SPECIFICATIONS
9
Antenna input impedance
Radio Frequency FM: 87.5MHz-108.0MHz, AM: 522KHz-1620KHz
Sensitivity
Radio storage
Radio audio output
Power Supply
FM: 75Ω (unbalanced),
AM: low impedance loop antenna
FM: ≤10uA, AM: ≤100uA
99
0.775V
~240V 50Hz
SNR
CD Audio Output
85dB
0.775V
Frequency Response
Dynamic Range
THD
Channel Crosstalk
FLP-CD930
20Hz~20KHz(-2dB)
75dB
≤0.1%
65dB
Net weight
Dimension 484X209X44mm
3.8Kg
Model

Version 0.1
TM