Flexit cvROBO User manual

ART.NO. 119721
MANUAL
Robot vacuum cleaner with mopping function
119740EN-03
2022-03
cvROBO

2
cvROBO
1.1. SAFETY AND INTENDED USE
• Read the following manual before using
cvROBO. Observe all the instructions
on safety, use and maintenance. Store
this manual for future reference.
Observe all the audio warnings
uttered by cvROBO, besides the
advice concerning the battery and the
charging dock.
• cvROBO must not be used by children
aged 8 years or younger and by
persons with reduced physical, sensory
or mental abilities. Non-expert or
untrained persons may only use
cvROBO if supervised by a person
responsible for their safety.
• This robot is not a toy. Supervise or
keep away small children and domestic
animals when cvROBO is operating.
• Do not leave the robot’s electrical parts,
battery or charging dock exposed.
Make sure that the domestic mains
voltage matches the rated voltage of
the charging dock supplied.
• cvROBO was designed exclusively
for being used in indoor domestic
environments. Do not use cvROBO to
collect burning materials or ash.
• Do not use cvROBO to vacuum liquids,
detergents, solvents or other chemical
substances, except those indicated in
the “Routine maintenance” chapter.
Do not use the tank with the water
GLVSHQVHUDQGWKHPLFURȴEUHFORWKWR
clean rugs.
1. General infomation
• Before using the robot, collect fragile
objects, garments, clothing and shoes,
newspapers and magazines, ribbons,
VWULQJVDQGFXUWDLQVIURPWKHȵRRU
as they could hamper or prevent the
regular cleaning cycle of cvROBO.
• Do not leave power cords running
DORQJWKHȵRRURUDQ\REMHFWV
connected to them that could by
dragged by cvROBO or damaged by
tipping over or falling.
• Do not place anything on top of
cvROBO – neither objects nor animals.
• Do not spray or pour liquids on
cvROBO.
• If there is an access to a balcony in the
cleaning zone, use the virtual magnetic
barrier to prevent the robot from
entering it and thus guarantee its safe
operation.
• cvROBO does not contain any
components that can be repaired by
the end user.

3
cvROBO
• The battery must be removed before
disposing of cvROBO.
• Do not place the battery near sources
of heat.
• Do not immerse the battery in a liquid.
• Technical assistance must be carried
out by authorised personnel. cvROBO
does not contain any components that
can be repaired by the end user.
1.2. BATTERY AND CHARGING
• Only use the original battery charger to
charge cvROBO. The product cannot
be used with any other type of charger.
The use of other battery chargers will
immediately void the warranty.
• If the charger has a damaged cord
or plug, it must be replaced with an
original spare part.
• Only use original batteries for cvROBO
TR800.
• The charging dock must only be
installed in environments protected
against rain or thunderstorms.
• In case of thunderstorms, protect
the charging dock against current
overloads.
• Never touch the charging dock with wet
hands.
• Make sure that the voltage of the
domestic power network matches the
rated voltage of the battery charger
supplied.
• Move cvROBO from the charging
dock before performing cleaning and
maintenance.
• Prior to each use, check the battery
and verify whether there are any signs
of damage or leakage. Do not charge
batteries that are damaged or show
signs of leakage.

4
cvROBO
2. Material provided
After opening the packaging, check that the following components – all supplied with
cvROBO – are present:
cvROBO
cvROBO
Accessories
Spare parts
charging dock
tank with water
dispenser
edge-sweeping side brushes
ȵRRUPRS
ȵRRUPRS
brush cleaning
FRPE
GHOLPLWDWLRQ
PDJQHWLFEDUULHU
+(3$ȴOWHU VSRQJHȴOWHU
charging dock
charger

5
cvROBO
Description of the components
Side sensor
0LFURȴEUHȵRRUFORWK
(MOP)
+(3$ȴOWHU
Container opening lever
6SRQJHȴOWHU
3ULPDU\ȴOWHU
Filter
FRPSDUWPHQW
ȵDS
Dust container
GHȵHFWRU
Dust container
Filter
compartment
Tank with water
dispenser
cvROBO push button panel
VIEW FROM ABOVE

6
cvROBO
Charging indicator light
9EDWWHU\FKDUJHU
Connector for
connecting the self-
cleaning base
Connector for connection
to charging dock
Charging contacts
Sensor for
FRPPXQLFDWLRQ
with cvROBO
0DLQEUXVKZLWKDLUȵRZULQJ
Edge-sweeping side brushes
Collision guards and sensor
Main brush cover
Front swivelling wheel
Rear wheel with shock absorber
&RQWDFWVIRUEDWWHU\FKDUJLQJ
VIEW FROM BELOW
VIEW FROM BELOW
Suction channel
cvROBO charging dock
Green LED on - power present
/('R΋QRSRZHU
Anti-fall sensors
Anti-fall sensors
Anti-fall sensors

7
cvROBO
Charging dock charger Volts (VAC) AC 100–240 V DC 24–1 A
Motor power Watts (W) 25
Frequency Hz 50/60
Lithium battery mAh 2600
Height cm 8.5
Diameter cm 35
Sound power level** dB <65
Charging system automatic, via the charging dock
Dust container emptying automatic, via the docking station
manual, by extracting the container
Compatibility with operating systems iOS | Android
Compatibility with voice assistance devices Amazon
Echo Google Home
Voice messages In English only
WiFi frequency 2,4 GHz
LQFRQGLWLRQVRIPD[LPXPVXFWLRQGXULQJȵRRUFOHDQLQJ
3. FY52%2VSHFLȴFDWLRQV
4. Installation
Please note! Prevent
direct sunlight from
reaching the charging
dock as it may interfere
with the communication
and hamper the regular
operation of cvROBO.
i
Domestic environmental conditions
For optimal results, the temperature of the
domestic environment must be between
10°C and 40°C.

8
cvROBO
Installing the charging dock without the
docking station
Position the charging dock at least 100 cm
away from stairs, empty zones and walls,
so that cvROBO can leave the charging
dock freely.
0DNHVXUHWKDWWKHȵRRULVȵDWDQGWKDW
the rear part of the self-cleaning base on
recommended
distance
100 cm
minimum distance
100 cm
recommended
distance
100 cm
Activating/deactivating the automatic self-cleaning function
The self-cleaning function can only be performed with the self-
FOHDQLQJEDVH7RGLVDEOHWKLVVHWWLQJPRYHFY52%2R΋WKHVHOI
cleaning charging base and simultaneously press and hold for 3
seconds the button and the front collision guard, or disable it
via the cvROBO app.
Connecting the
charging dock to
the power supply
power supply
which the robot is inserted touches the
wall.
Make the electrical connection to power
the charging dock as shown in the picture.

9
cvROBO
Installing the charging dock with the
docking station
In this solution, the docking station is
connected to a central vacuum unit to
vacuum
socket
4.1. CONNECTION DIAGRAM
ȵRRU
GXVWYDFXXPOLQH
connected to the central
YDFXXPXQLW
charging dock
protective cover
YDFXXPVRFNHW
docking station interface
ZLWKWKHYDFXXPVRFNHW
cvROBO
domestic power
supply
recommended
distance
100 cm
recommended
distance
100 cm
minimum distance
100 cm
eliminate the dust collected by cvROBO
without the user’s direct intervention.
docking station
Connect the docking station
to the central vacuum unit.
(See separate manual).

10
cvROBO
5. Charging the battery
Total charging time
ΔIWKHEDWWHU\LVFRPSOHWHO\ȵDWLWPD\WDNH
roughly 2 hours to charge completely.
Low battery level
If the battery level is below 20%, cvROBO
will not be able to function.
In such case, it must be placed manually
on the charging dock and left there until
the battery charges fully.
Stand-by
Once cvROBO has been fully charged, it
enters the STAND-BY mode.
To reactivate cvROBO, press the button
IRUbVHFRQG
Battery replacement
When the battery is exhausted, it must
be replaced with a new original one. The
instructions for replacing the battery are
included in the spare part’s package.
First cvROBO charge
:KHQFKDUJLQJFY52%2IRUWKHȴUVWWLPH
place it on the charging dock until the
battery is fully charged.
2QFHFKDUJLQJWHUPLQDWHVWKHȵDVKLQJ
blue light on the push-button panel
becomes steady.
FLASHING BLUE LIGHT
Charging in progress
STEADY BLUE LIGHT
&KDUJLQJFRPSOHWHG
STEADY RED LIGHT
FY52%2ȵDW
Warning! Leave cvROBO
to charge on the
charging dock until the
flashing blue light turns
off.
!
Please note!
If prolonged periods of
non-use are expected,
charge the battery fully,
remove it and store it in
a cool and dry place.
i
Lithium batteries constitute
special solid waste that must be
disposed of according to the
applicable regulations.

11
cvROBO
Tips for use
)RULPSURYHGFOHDQLQJHɝFLHQF\LQVSHFW
the areas involved beforehand and
prepare them as follows:
• Clear the surfaces of the home from
any obstacles that can be struck during
cleaning, move any objects lying in the
way such as electrical cables, shoes,
handbags with straps, magazines and
newspapers, remove light rugs, vases
and fragile furnishings, toys scattered
RQWKHȵRRUSODFHFKDLUVDERYHWKH
tables, raise curtains or sofa covers with
IULQJHVWRXFKLQJWKHȵRRUDQGOLIWERZOV
for pet food.
• Be careful with objects in precarious
balance that can be struck by the robot
directly or indirectly. Check that any
open doors are not closed after colliding
with cvROBO, preventing it from
returning to the charging dock.
• cvROBO performs its cleaning cycle
regularly even if domestic animals are
present. Any zones of the home to be
excluded from cvROBO’s path can be
delimited using the magnetic barrier
accessory (supplied).
• If the cvROBO is cleaning in a working
area larger than 80 square meters (not
divided by any magnetic barriers), it
may be that the cvROBO goes too far
away from its charging base, and it may
happen that batteries go empty before
LWȴQGVEDFNLWVFKDUJLQJVWDWLRQDQG
stops. If this happens carry it back and
place it in the docking station.
• Anti-fall sensors emit infrared light
ZKLFKLVUHȵHFWHGLQWKHȵRRUΔIWKHUHLV
QRUHȵHFWLRQFY52%2LQWHUSUHWVLWDVD
risk, eg a staircase. Dark surfaces with
OLWWOHUHȵHFWLRQFDQFDXVHFY52%2WR
misinterpret the surface.
AVOID
RECOMMENDED
GHOLPLWDWLRQ
PDJQHWLF
barrier

12
cvROBO
Anti-fall sensors
• cvROBO is equipped with anti-fall
sensors to stop it in presence of stairs
EDOFRQLHVPLGGOHȵRRUHWFȐ
Stairs with very rounded protrusions
can create anti-fall sensors
malfunction, in this case we
recommend to use the delimitation
magnetic barrier.
8VHWKHGHOLPLWDWLRQ
PDJQHWLFEDUULHU
7KHGHOLPLWDWLRQ
PDJQHWLFLVQRW
QHFHVVDU\
rounded
protrusions
straight
protrusions
PDJQHWLF
barrier
• Anti-fall sensors do not guaranty
that cvROBO stops in the presence
RIEDOFRQLHVDQGPLGGOHȵRRULV
compulsory to use a magnetic barrier
(ATR802) or an adequate mechanical
protection.

13
cvROBO
6. Cleaning programmes
After it starts, cvROBO automatically
calculates the optimal cleaning route by
choosing which path to take to cover all
the accessible rooms.
cvROBO travels through and cleans
all rooms of the home without leaving
any uncovered patches, guaranteeing
thorough cleaning. By default it starts with
In this programme, the robot
cleans along parallel lines.
In this programme, an area measuring
roughly 2 m2is cleaned rapidly in a circular
direction, starting from a centre of rotation
chosen by the user.
Place cvROBO manually in the centre of the
spot to be cleaned and activate the cleaning
cycle by pressing the button for 6 seconds.
Once cleaning terminates, cvROBO will
reposition itself in the centre of the cleaned
area.
A
Smart programme
Spot programme
In this programme, cvROBO cleans
the perimeter of the walls of the
room where it is located.
Follow the wall programme
FP
Spot
FP
Follow the wall
A
6PDUW
6PDUW
Spot
Follow
the wall
the SMART program.
Once cleaning terminates, cvROBO
returns to its charging base, empties the
dust container (if the self-cleaning base
is mounted) and charges the battery
automatically.
These programmes can also be activated
via the cvROBO app.

14
cvROBO
7. cvROBO control modes
cvROBO has two control modes:
cvROBO push-button panel and cvROBO app
Function Buttons on cvROBO
SWITCH-ON
cvROBO switches on (check the battery
charge as explained on page 7)
press the button for 6 seconds
CLEANING CYCLE START
the SMART cleaning programme activates SUHVVWKHEXWWRQEULHȵ\
PAUSE / RESTART
puts the cleaning programme in pause/
restart mode
SUHVVWKHEXWWRQEULHȵ\
RETURN TO CHARGING BASE
the robot returns to the charging base
wherever it is located
SUHVVWKHEXWWRQEULHȵ\
DUST CONTAINER AUTOMATIC CLEANING
(only with docking station)
with cvROBO mounted on the self-
cleaning base, press the button twice
rapidly.
The central vacuum unit activates and
the cvROBO dust container empties
SPOT CLEANING PROGRAMME press the button for 3 seconds
REPEAT CLEANING CYCLE press the button twice
SELF-CLEANING FUNCTION DISABLING /
ENABLING
the automatic self-cleaning function is
disabled /enabled again
simultaneously press and hold for 3
seconds the button and the front
collision guard
SWITCH-OFF
FY52%2VZLWFKHVR΋ZLWKDQ\VHWFOHDQLQJ
programme
press the button for 6 seconds
Operation with the push-button panel
The push-button panel allows for using the
following control modes:

15
cvROBO
Function Set up
2Q2΋ 2Q2΋
Start the cleaning cycle - SMART cleaning program SMART - intelligent mode
Automatic cleaning (docking station) Enable - Disable
Dust container emptying Start - cleaning on request
Return to the charging station Returns to recharge
Edge cleaning program - FOLLOW THE WALL FOLLOW THE WALL
SPOT cleaning program SPOT
Adjust suction power: min / medium / max Suction power
Stand by Stand by
Search for cvROBO Search for a device
Records the cleaning cycles history (cleaning time and m2)Record
Timer (daily or weekly cleaning schedule) Add schedule
&KRLFHRIZDWHUGRVDJHOHYHOIRUȵRRUZDVKLQJ MOP water quantity
5HVHWWLQJWKHZLȴFRQȴJXUDWLRQ
If the smartphone or tablet does not connect to cvROBO
GXHWRWKHFRQȴJXUDWLRQRIWKHGRPHVWLFURXWHURUWKH
password or for other reasons, the Wi-Fi settings of
cvROBO can be reset as explained below:
1 - simultaneously press the buttons until the
following voice command is heard: Wi-Fi has been reset.
7KHOXPLQRXVLQGLFDWRUZLOOVWDUWȵDVKLQJSXUSOH
UHSHDWWKH:L)LFRQȴJXUDWLRQSURFHGXUH
7.1. OPERATION WITH THE CVROBO APP
cvROBO app for
Android and iOS platforms
7KHOXPLQRXV
indicator will start
ȵDVKLQJSXUSOH
To use the cvROBO app with a smartphone/tablet, it is
necessary to access the Internet through a Wi-Fi network.
To access the cvROBO app for Android and iOS
platforms, scan the adjacent QR code.
Register as requested by the procedure to complete
WKH:L)LFRQȴJXUDWLRQDQGDFFHVVZLWK\RXU/2*Δ1
credentials.
The cvROBO app allows for using the following control
modes:

16
cvROBO
8. Cleaning modes
cvROBO has two cleaning modes: DUST REMOVAL (STANDARD) - FLOOR WASHING
The modes are enabled automatically on the basis of the type of container/tank inserted
on cvROBO.
8.1. DUST REMOVAL
(STANDARD)
FY52%2FOHDQVȵRRUVXUIDFHVXVLQJWKH
edge-sweeping side brushes and the main
brush.
The dust collected is conveyed to the
dust container which is then emptied
automatically on the self-cleaning base, or
manually by the end user.
Please note!
cvROBO will not start
unless the dust container
is mounted on it.
i

17
cvROBO
8.2. FLOOR WASHING
FY52%2FOHDQVȵRRUVXUIDFHVXVLQJWKH
water contained in the tank (S) and the
023PLFURȴEUHFORWK3ZKLFKUHWDLQV
moisture depending on how much water
was dispensed by cvROBO.
With the cvROBO app and the remote
control, it is possible to choose the level of
water dispensed to the MOP. S
P
Please note!
ŗZKHQXVLQJWKH)/225
WASHING mode, it is
necessary to move the
rugs along the cleaning
route;
ŗWKHWDQNZLWKGLVSHQVHU
must be filled completely
with water alone (at
30°C) as indicated;
ŗDWWKHHQGRIWKH
washing cycle, empty
the tank of any residual
water, wash the cloth
used and mount the dust
container back on.
i
Please note!
With the water tank
inserted, cvROBO
collects dust with the
brushes and conveys it
to the suction channel
without activating the
suction turbine.
i

18
cvROBO
9. Magnetic barrerier
Accessory supplied (1 barrier supplied)
It is used to exclude rooms or areas of the
home from the cleaning route covered by
cvROBO.
The sensor integrated on cvROBO detects
the magnetic barrier and stops the robot
from crossing it.
The supplied barrier is 1 m long.
MAGNETIC BARRIER
If cvROBO is located far from the charging
dock, it may lose the communication and
continue cleaning the same zone without
being able to return to the base, causing
the battery to run out.
Examples of use
With multiple magnetic barriers
Multiple magnetic barriers laid in series
can be used to delimit special areas to be
excluded from cvROBO’s path.

19
cvROBO
10. Routine maintenance
To guarantee optimal performances from cvROBO, complete the single routine
maintenance operations listed in this chapter.
The maintenance intervals listed in the table are subject to change in relation to the type
of domestic environment, the presence of pet animals and how frequently the robot is
used.
Indicative routine maintenance schedule
dust container empty the dust container
With self-cleaning
base
Without self-cleaning
base
empties automatically
when the robot
returns to the
self-cleaning base
after every use
self-cleaning
base
clean thoroughly by removing
dirt residues
every 10 cleaning
cycles --
SULPDU\ȴOWHU
+(3$ȴOWHU
VSRQJHȴOWHU
FOHDQHDFKȴOWHUWKRURXJKO\E\
UHPRYLQJGLUWUHVLGXHVȴOWHUV
should not be washed
weekly visual
inspection and clean
when necessary
weekly visual
inspection and clean
when necessary
side brushes
left (L) - right (R)
clean thoroughly by removing
hair, threads and residues
using the comb supplied
weekly visual
inspection and clean
when necessary
weekly visual
inspection and clean
when necessary
main brush
clean thoroughly by removing
hair, threads and residues
using the comb supplied
weekly visual
inspection and clean
when necessary
weekly visual
inspection and clean
when necessary
charging dock
clean the sensors on the front
of the charging dock using a
damp cloth
every 30 cleaning
cycles
every 30 cleaning
cycles
clean the contacts of the charg-
ing dock using a damp cloth
every 20 cleaning
cycles
every 20 cleaning
cycles
sensors clean all sensors on cvROBO
using a damp cloth
every 20 cleaning
cycles
every 20 cleaning
cycles
casters clean thoroughly by removing
hair, threads and dirt residues
every 10 cleaning
cycles
every 10 cleaning
cycles
tank with water
dispenser ȴOOZLWKZDWHURQO\ empty after every use
023ȵRRUFORWK wash under running water after every washing
cycle
People who are sensitive to contact
with dust should always wear personal
protective equipment (suitable face mask
DQGJORYHVEHIRUHFOHDQLQJWKHȴOWHUV
brushes and dust container.

20
cvROBO
10.1. CLEANING THE DUST CONTAINER - (SELF-CLEANING FUNCTION)
1 - Press the opening/closing lever (A) to
UHPRYHWKHGXVWFRQWDLQHUIURPFY52%2
GXVWVXFNHGXSE\WKHFHQWUDOYDFXXPXQLW
docking station
DXWRPDWLFVXFWLRQ
Periodic inspection of the dust container
We recommend periodically checking the dust container manually and clearing it
thoroughly from any materials not sucked up by the central vacuum unit.
3 - Press the lever (A) again and insert
WKHFRQWDLQHUXQWLO\RXKHDUD&/Δ&.
2 - Open the dust container,
HPSW\LWFRPSOHWHO\DQGFOHDQ
LWZLWKDFORWK
A
With docking station
The dust container is cleaned
automatically when cvROBO returns to the
docking station.