Flexport FX-HM0404 User manual

USER MANUAL
4x4 HDMI Matrix
Enjoy vivid video world

Product Introduce:
The 4x4 HDMI matrix can connect four HDMI signal sources with the four displays at the
same time.It can easily and freely split or switch four hdmi signals on four displays or
projectors which compatible with hdmi signal. In addition, connect its port with HDMI cable
and amplify the HDMI signal.
The equipment our company produced provide solution for the following applications:
such as the place limited of noise, transmission distance and safety, data center control,
information distribution, the presentation in conference room, teaching environment and
corporate training places.
Features :
● Four HDMI signals input to be independently distributed or switched to four displays
which support HDMI signal input
● Support HDMI 1.3 and HDCP1.4
● Support CEC
● Support true color 12 bit
● Support Blu-Ray DVD24/50/60fs/HD-DVD/xvYCC
● Support audio format DTS-HD/Dolby-trueHD/LPCM7.1/DTS/DOLBY-AC3/DSD

● Support signal timing reset
● Support AWG26 HDMI standard cable, input up to 15 meters, output up to 20 metes
● Input ports can be controlled by IR Remote Control
● Via RS-232 control, the Machine can upgrade the software, and the input and the
output can be switched by computer
● No signal loss
● 12V/3A External Power Supply
Physical interface diagram
①: INPUT1—INPUT 4：HDMI input
②: OUTPUT1—OUTPUT4: HDMI output
③: ON/OFF: Power switch
④: DIP：dial switch to switch software for upgrading
⑤：IR : used for the IR remote control of this machine
⑥: :DC 12V ：DC12V/3A power
①: Serial IR：Used for the machine infrared remote control
②: RS232：control the machine via the serial port.

③: Output1: the key of HDMI output 1
④: Output1: the key of HDMI output 1
⑤: Output1: the key of HDMI output 1
⑥: Output1: the key of HDMI output 1
⑦: IR : used for the IR remote control of this machine
⑧:L1-L4:Input signal Indicator L1----L4
RS-232 settings:
Baud rate……….....................................................................................................9600
Data bits................................................................................................................ 8
Parity Check .............................................................................................................None
Stop bits.................................................................................................................1
Cyclic redundancy check………………………………………………………………None
HDMI 4X4 serial port instruction manual
1.video switch
Cir +” ” cmd +Enter
Cmd value range：>=0 and <=ff
1）4 outputs switch to the same input ：cir a1~a4+Enter
For example：
Cir a4+Enter: All outputs switch to input 4
2）One to one switch ：cir f0+Enter
For example：
cir f0+Enter：indicate output1->input1,output2->input2~output4->input4
3）all output++switch：cir aa+Enter
For example：

cir aa+Enter：indicate output1~ouput4 the selected input make an addition switch
4）all output - -switch：cir ab+Enter
For example：
cir ab+Enter：indicate output1~ouput4 selected input make an subtraction switch
5）single output- -switch：cir xc+Enter
“x”value range 0~3，
For example：
cir 1c+Enter：indicate output2 selected input make an addition switch
6）single output++switch：cir xd+Enter
“x”value range0~3，
For example：
cir ,1d+Enter：indicate output2 selected input make an subtraction switch
7）Any output switch to any input：cir xy+Enter
“X” value range 0~3，”y” value range 0~3
For example：
Cir 03+Enter: indicate output1 switch to input4
Cir 12+Enter: indicate output2 switch to input3
1. EDID switch
The EDID This machine provided include:
1）1080I 2ch 2d
2）1080I 6ch 2d
3）1080I 8ch 2d
4）1080P 2ch 2d
5）1080P 6ch 2d
6）1080P 8ch 2d
7）1080P 2ch 3d
8）1080P 6ch 3d
9）1080P 8ch 3d
10）1280X1024 DVI
11）1080P DVI
12）1920X1200 DVI
serial command：
sid+” ”x1+” ”x2+Enter
x1 indicate the input port ，value range 1~f，1~4 indicate input1~input4,”f”indicate all
input

x2 indicate the selected EDID，value range 1~c, corresponding EDID are above
listed1~12 EDID。
For example：
sid 2 a+Enter
Indicate input2 select 1280X1024 DVI EDID
Specification:
HDMI resolution……………………....24/50/60fs/1080p/1080i/720p/576p/576i/480p/480i
Support audio color format …………………………..…………. …............................12bit
Support audio format……………DTS-HD/Dolby-trueHD/LPCM7.1/DTS/Dolby-AC3/DSD
Max baud rate…….…………….…………………………………………. ……..2.25Gbps
Input and output TMDS signal………….…………………………..…… 0.5~1.5Volts p-p
Input and output DDC signal……………………………………………..5Volts p-p (TTL)
Input cable distance.……………………….……………….………….≤15m HDMI AWG26
Output cable distance…………………………….…...≤20m AWG26 HDMI standard cable
Max working current………………………………………………………………………2.0A
Power adapter format Input………input:AC(50HZ, 60HZ) 100V-240V;output: DC12V/3A
Operating Temperature range……..…………….…………………………… (-15 to +55℃)
Working humidity range………………………….….………5 to 90%RH (No Condensation)
Dimension (L x W x H)……………………………….……………………435*184*46 (mm)
Weight…..………………………………………………………..…………….………..1900g
Operating and Connecting
§1 Connect HDMI cable from HDMI source device into HDMI matrix input port
§2 Connect HDMI cable from HDMI matrix Output port into display
§3 Connect 12V External power adapter to the HDMI matrix

§4 the customer can switch the input signal to corresponding output port via the button
on front panel.
§5 How to use RS-232 port?
Through RS - 232 port you can update software and monitor the state of the input
and output signals.And can switch signals. When connect the computer, The customer
can easily switch the signals via computer.
Notes:
Please use correctly and maintenance properly, to ensure product performance and work
properly
1. Should Stay away from damp, high temperature, dusty, corrosion and oxidation gas
environment in order to avoid damage
2. All parts should avoid strong vibration, no collision tapping and drop fall, to avoid
damage.
3. Do not touch the unit power adapter plugs with wet hand
4. Unplug the adapter plug from the power socket, please hold the plug, don't pull the
power cord
5. please turn off the power supply when not use the machine.(unplug the power
adapter plug when not use for a long time)
6. Please do not open the machine cover, do not touch any device in the machine.
7. Please use the power adapter provided or approved by the manufacturer
Pls Check the connecting cable carefully before the power on, Must ensure all interface
are right connected.Common fault diagnosis and processing method is as follows：
No.
fault phenomenon
Reason and solution
1
No electricity
1.Check that if power plug is properly inserted into the
power outlet
2.Check that if the power is on.

2
No image
1.Confirm television has been turned on and is
connected to the machine.
2.Whether the input signal source open and connect in
good condition.
3.Check the connection state of the system.
4.Check whether the cable is in good condition.
5.Cable quality (HDMI cables is required to conform to
the HDMI standard).
3
Image blurring
1.reconnect the port, in case of poor connection of
socket interface
2.cable quality (HDMI cables is required to conform to
the HDMI standard).
4
Remote control
1.Check that if the remote battery insulation slices were
taken out
2.Whether the remote is with batteries
The Package includes:
1. HDMI Matrix x1pc
2. IR Remote Control x1pc
3. 12V DC Power adapter x1pc
4. User Manual. x1pc