Flow-Rite Pro-Fill RV Edition Guide

Package Contents
A. Pro-Fill Valves (6)
B. Flexible Manifolds (2)
C. Quick Connect Coupler (1)
D. Dust Cap (1)
E. Red End Caps (9)
F. Pro-Fill Tubing (5’)
Important
they have been neglected and the
.derevocerasetalpllaosllechcae
installing and using Pro-Fill to top
been neglected and then charging
can cause the water level to expand
in the loss of electrolyte. Once Pro-
Fill is installed, monthly topping
extremely low water level to occur.
1 2
4
the system. Do not connect more than six
3
Link manifolds/valves together with Pro-
Fill tubing. Cut the desired length of
tubing from the open end of the included
5
Cover any remaining barbs with red end
BL-189
03/14
Illustraon purposes only. Actual product is subject to change.
Remove exisng vent covers and install
Pro-Fill valves by inserng into baery
and tuning ¼ rotaon to lock into place.
Install the flexible manifold by carefully
pushing and rotang swivel tee into each
valve unl it snaps into place.
A
D
B
F
C
E

Important
charging. 1 2
Remove the dust cap from the water
supply line and connect it to the squeeze
couplers together.
4
Immediately disconnect the squeeze bulb
and replace the dust cap.
3
When the bulb becomes hard, all cells are
full.
5
Any water remaining in the squeeze bulb
Notes:
1.
2.
3.
below freezing.
Patent Pending BL-189
03/14